UL 1023-1996 UL Standard for Safety Household Burglar-Alarm System Units (Sixth Edition Reprint with Revisions Through and Including July 01 2013)《家用防盗警报系统装置》.pdf

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 1023 Household Burglar-Alarm System UnitsUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR

2、FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Household Burglar-Alarm System Units, UL 1023 Sixth Edition, Dated November 25, 1996 Summary of Topics This revision to ANSI/UL 1023 is being issued to address minimum spacing requirements changes. Text that h

3、as been changed in any manner or impacted by ULs electronic publishing system is marked with a vertical line in the margin. Changes in requirements are marked with a vertical line in the margin and are followed by an effective date note indicating the date of publication or the date on which the cha

4、nged requirement becomes effective. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL provides this Standard as is

5、without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of prots, lost savings, l

6、oss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless

7、 of the form of the claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error or deviation introduced wh

8、ile purchaser is storing an electronic Standard on the purchasers computer system. The requirements in this Standard are now in effect, except for those paragraphs, sections, tables, gures, and/or other elements of the Standard having future effective dates as indicated in the note following the aff

9、ected item. The prior text for requirements that have been revised and that have a future effective date are located after the Standard, and are preceded by a SUPERSEDED REQUIREMENTS notice. JULY 1, 2013 UL 1023 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHO

10、UT PERMISSION FROM UL JULY 1, 2013 UL 1023 tr2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL NOVEMBER 25, 1996 (Title Page Reprinted: July 1, 2013) 1 UL 1023 Standard for Household Burglar-Alarm System Units First Editi

11、on March, 1972 Second Edition August, 1978 Third Edition October, 1978 Fourth Edition September, 1985 Fifth Edition September, 1991 Sixth Edition November 25, 1996 This ANSI/UL Standard for Safety consists of the Sixth edition including revisions through July 1, 2013. The most recent designation of

12、ANSI/UL 1023 as an American National Standard (ANSI) occurred on July 1, 2013. ANSI approval for a standard does not include the Cover Page, Transmittal Pages, Title Page, or effective date information. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any tim

13、e. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at http:/. ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standard should be altered in any way. All of ULs Standards and all copyright

14、s, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. COPYRIGHT 2013 UNDERWRITERS LABORATORIES INC. ANSI/UL 1023-2013UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL MAY 11, 2009 HOUSEHOLD BUR

15、GLAR-ALARM SYSTEM UNITS - UL 1023 2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS INTRODUCTION 1 Scope .7 2 General 8 2.1 Components .8 2.2 Units of measurement .8A 2.3 Undated references .8A 2.4 Terminology 8A

16、 3 Glossary 8A 4 Instructions and Drawings .10 CONSTRUCTION ASSEMBLY 5 General .10 6 Test Features .11 7 Enclosures 11 7.1 General 11 7.2 Openings .12A 7.3 Cast metal 16 7.4 Sheet metal 17 7.5 Nonmetallic .17 7.6 Doors, covers, and guards 17 7.7 Screens and expanded metal .20 8 Electric Shock .20 9

17、Protection Against Corrosion 21 FIELD-WIRING CONNECTIONS 10 General 21 11 Cord-Connected Products .21 12 Permanently-Connected Products .22A 13 Special Terminal Assemblies .24 14 Polarity Identication 25 INTERNAL WIRING AND ASSEMBLY 15 General 25 16 Separation of Circuits .25 17 Bonding for Groundin

18、g 26 18 Equipment Grounding Connection 27 MAY 11, 2009 HOUSEHOLD BURGLAR-ALARM SYSTEM UNITS - UL 1023 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL ELECTRICAL COMPONENTS 19 General 28 19.1 Mounting of parts 28 19.2 Current-carrying parts

19、.28 19.3 Capacitors .28 19.4 Overcurrent protection 28 19.5 Semiconductors 28 19.6 Switches 28 19.7 Secondary power supply 28 20 Insulating Materials .29 20.1 General .29 20.2 Bushings 30 21 Batteries .30 22 Lampholders and Lamps 31 23 Transformers, Coils, and Relays 32 SPACINGS 24 General 32 PERFOR

20、MANCE GENERAL 25 Common Requirements .33 25.1 F.C.C. requirements 33 25.2 Test units and data .33 25.3 Test samples and miscellaneous data 33 26 Operation Test .34 27 Electrical Supervision Test .36 28 Input Test 36 28.1 Input circuit 36 28.2 Output circuit .36A 29 Power-Limited Circuits .36B 29.1 G

21、eneral 36B 29.2 Maximum voltage 39 29.3 Maximum current .39 29.4 VA max (not inherently limited circuits only) .40 30 Undervoltage Operation Test .40 31 Overvoltage Operation Test 40 32 Variable Ambient Temperature Test .41 33 Humidity Test 41 34 Leakage Current Test for Cord-Connected Products 41 3

22、5 Electric Shock Current Test .44B 36 Overload Test .48A 36.1 General 48A 36.2 Separately energized circuits 49 37 Endurance Test 49 37.1 General .49 37.2 Separately energized circuits 49 38 Jarring Test 49 39 Vibration Test 50 MARCH 19, 2001 HOUSEHOLD BURGLAR-ALARM SYSTEM UNITS - UL 1023 4UL COPYRI

23、GHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 40 Dust Test 50 41 Component Malfunction Test .51 42 Rain Test 51 43 Dielectric Voltage-Withstand Test .54 44 Static Discharge Test .55 45 Temperature Test .55 46 Charging Current Test .59 46.1 General

24、.59 46.2 Discharged battery .59 46.3 Charged battery 60 46.4 Discharged battery second trial .60 47 Abnormal Operation Test 60 48 Electrical Transient Tests .60A 48.1 General 60A 48.2 Supply line transients .61 48.3 Internally induced transients .61 48.4 Input/output circuit transients 61 49 AC Indu

25、ction Test .63 50 Tests on Polymeric Materials .64 51 Audibility Test 64 52 Battery Replacement Test 64A 53 Drop Test 64A 54 Strain Relief Test .65 54.1 General .65 54.2 Field-wiring leads .65 55 Ignition Through Bottom-Panel Openings Tests .65 55.1 General .65 55.2 Hot aming oil .65 55.3 Molten pol

26、yvinyl chloride (PVC) and copper .66 56 Mechanical Strength Tests for Enclosures .66 57 Special Terminal Assemblies Tests .67 57.1 General .67 57.2 Disconnection and reconnection .67 57.3 Mechanical secureness .67 57.4 Flexible test .67 57.5 Millivolt drop test .67 57.6 Temperature test .68 SHORT-RA

27、NGE RADIO FREQUENCY DEVICES 58 General 68 59 Reference Level Determination .68 59.1 Method 1 68 59.2 Method 2 69 60 Interference Immunity .73 61 Frequency Selectivity 74 62 Time to Report Alarm .75 63 Inoperative Transmitter Reporting .75 64 Clash 76 65 Error (Falsing) Rate .76 66 Throughput Rate 78

28、 67 Maximum Duration of Transmission .79 68 Battery Status Indication .79 MARCH 19, 2001 HOUSEHOLD BURGLAR-ALARM SYSTEM UNITS - UL 1023 4AUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 69 Transmitter Stability Tests .80 70 Transmitter Accel

29、erated Aging Test .80 71 Installation Instructions and User Manual 80 SHORT-RANGE WIRELESS DEVICES 72 General 81 73 Time to Report Alarm .81 74 Inoperative Transmitter Reporting .81 75 Clash 81 76 Error (Falsing) Rate .81 77 Throughput Rate 82A 78 Maximum Duration of Transmission 82B 79 Battery Stat

30、us Indication .82B 80 Transmitter Stability Tests 82B 81 Transmitter Accelerated Aging Test .83 82 Installation Instructions and User Manual 83 MANUFACTURING AND PRODUCTION TESTS 83 General 83 84 Dielectric Voltage-Withstand Tests 83 85 Grounding Continuity Tests for Cord-Connected Products .85 MARK

31、INGS 86 Details .85 ACCESSORY EQUIPMENT 87 General 88 88 Construction .88 89 Performance (Installation) Test 88A 90 Markings .88A APPENDIX A Standards for ComponentsA1 DECEMBER 30, 2004 HOUSEHOLD BURGLAR-ALARM SYSTEM UNITS - UL 1023 4BUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION O

32、R DISTRIBUTION WITHOUT PERMISSION FROM UL DECEMBER 30, 2004 HOUSEHOLD BURGLAR-ALARM SYSTEM UNITS - UL 1023 5 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL This page intentionally left blank. DECEMBER 30, 2004 HOUSEHOLD

33、BURGLAR-ALARM SYSTEM UNITS - UL 1023 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL INTRODUCTION 1 Scope 1.1 These requirements cover burglar-alarm system units intended for use in residences to protect a complete multiroom residence, one

34、room of a residence, or one opening or area in a residence. 1.2 Household burglar-alarm system units covered by these requirements consist of one or more unit assemblies of electrical components that are designed to detect the presence, movement, sound, or other activity of an intruder. Provisions a

35、re made for the connection of a power supply, remote control, and signal circuits by a prescribed method of wiring. These system units usually operate within the limits of Class 2 remote control and signal circuits as dened by Article 725 of the National Electrical Code, NFPA 70. 1.3 These requireme

36、nts also apply to the use of combination systems, such as a combination re-burglar-alarm system control unit. A combination system is connected in such a manner that fault conditions (shorts, opens, grounds) in the burglar-alarm system circuit wiring, or interconnections between the re- and burglar-

37、alarm system circuits, will not interfere with the supervision of the re alarm system or will not prevent intended alarm signal operation. 1.3.1 A combination household re and burglar alarm system shall also comply with the Standard for Household Fire Warning System Units, UL 985. 1.3.1 added June 1

38、, 1999 1.4 These requirements cover accessories that are external to the control unit and that are dependent upon the control unit function, such as end-of-line devices, annunciators, remote switches, and the like. 1.5 Intrusion detection devices, such as motion detectors or sound detectors, are cov

39、ered by the Standard for Intrusion-Detection Units, UL 639. 1.5 revised February 23, 1999 1.6 A household burglar alarm system shall provide supervision of the initiating device circuits, so that if there is an open in the circuit or failure of a transmitter devices ability to communicate with its r

40、eceiver, the open or failure to transmit will be indicated to the alarm system user. Revised 1.6 effective December 30, 2006 1.7 Only alarm equipment determined acceptable for household burglar alarm service may be installed under the requirements contained in the Standard for Installation and Class

41、ication of Residential Burglar Alarm Systems, UL 1641. Revised 1.7 effective December 30, 2006 1.8 A product that contains features, characteristics, components, materials, or systems new or different from those covered by the requirements in this standard, and that involves a risk of re or of elect

42、ric shock or injury to persons shall be evaluated using appropriate additional component and end-product requirements to maintain the level of safety as originally anticipated by the intent of this standard. A product whose features, characteristics, components, materials, or systems conict with spe

43、cic requirements or provisions of this standard does not comply with this standard. Revision of requirements shall be proposed and adopted in conformance with the methods employed for development, revision, and implementation of this standard. DECEMBER 30, 2004 HOUSEHOLD BURGLAR-ALARM SYSTEM UNITS -

44、 UL 1023 7UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 2 General 2.1 Components 2.1.1 Except as indicated in 2.1.2, a component of a product covered by this standard shall comply with the requirements for that component. See Appendix A fo

45、r a list of standards covering components used in the products covered by this standard. 2.1.2 A component is not required to comply with a specic requirement that: a) Involves a feature or characteristic not required in the application of the component in the product covered by this standard, or b)

46、 Is superseded by a requirement in this standard. 2.1.2 revised March 19, 2001 2.1.3 A component shall be used in accordance with its rating established for the intended conditions of use. 2.1.3 revised March 19, 2001 2.1.4 Specic components are incomplete in construction features or restricted in p

47、erformance capabilities. Such components are intended for use only under limited conditions, such as certain temperatures not exceeding specied limits, and shall be used only under those specic conditions. 2.1.4 revised March 19, 2001 2.1.5 If a digital alarm communicator transmitter is used to tran

48、smit signals to a remote location and is to be included as a component of the system, it shall comply with the applicable requirements in the Standard for Digital Alarm Communicator System Units, UL 1635. For other transmission methods, the system shall comply with the Standard for Central Station B

49、urglar Alarm Units, UL 1610 (with the applicable exceptions for residential applications). Otherwise the user must be notied that the off-premises transmission method has not been so investigated. Exception: Packet switched data network alarm communicator transmitters intended for use in residential burglar-alarm systems are not required to identify and report a loss of connection/signal within 200 seconds at the central station receiving unit. The transmitter shall contact the receiver with an identia