UL 10377 (ND)-2017 National Differences For UL 10377 Consumer Product Safety C Guidelines for Suppliers (First Edition).pdf

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULNational Differences ForUL 10377Consumer Product Safety Guidelines for SuppliersUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULNational D

2、ifferences ForUL 10377Consumer Product Safety Guidelines for SuppliersFirst EditionEdition Date: APRIL 28, 2017This is the first edition of CAN/UL 10377, the Standard for Consumer Product Safety Guidelines for SuppliersThis document provides a single listing of the National Differences included in t

3、he UL adoption ofthe corresponding ISO standard.All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, ortransmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwisewithout prior permission of UL.UL provides this standa

4、rds document as is without warranty of any kind, either expressed or implied,including but not limited to, the implied warranties of merchantability or fitness for any purpose.In no event will UL be liable for any special, incidental, consequential, indirect or similar damages,including loss of prof

5、its, lost savings, loss of data, or any other damages arising out of the use of or theinability to use this standards document, even if UL or an authorized UL representative has been advisedof the possibility of such damage. In no event shall ULs liability for any damage ever exceed the pricepaid fo

6、r this standards document, regardless of the form of the claim.Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold ULharmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonableattorneys fees) resulting from an

7、y error or deviation introduced while purchaser is storing an electronicStandard on the purchasers computer system.Copyright 2017 Underwriters Laboratories Inc.APRIL 28, 2017NATIONAL DIFFERENCES FOR UL 103772UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMI

8、SSION FROM ULPrefaceThere are six types of National Differences as noted below. The difference type is noted on the first lineof the National Difference in the standard. The standard may not include all types of these NationalDifferences.DR - These are National Differences based on the national regu

9、latory requirements.D1 - These are National Differences which are based on basic safety principles and requirements,elimination of which would compromise safety for consumers and users of products.D2 - These are national differences from ISO requirements based on existing safety practices. Theserequ

10、irements reflect national safety practices, where empirical substantiation (for the ISO or nationalrequirement) is not available or the text has not been included in the ISO standard.DC - These are National Differences based on the component standards and will not be deleted until aparticular compon

11、ent standard is harmonized with the ISO component standard.DE - These are National Differences based on editorial comments or corrections.DT - These are National Differences that are the result of pending changes that have been tentativelyagreed internationally by committees for the next edition of

12、the standard and therefore are expectedoutcomes of the next edition. These changes include both clarifications and substantive changes inrequirements and that will be reviewed when the next edition is published.Each national difference contains a description of what the national difference entails.

13、Typically one of thefollowing words is used to explain how the text of the national difference is to be applied to the base ISOtext:Addition / Add - An addition entails adding a complete new numbered clause, subclause, table, figure,or annex. Addition is not meant to include adding select words to t

14、he base ISO text.Deletion / Delete - A deletion entails complete deletion of an entire numbered clause, subclause, table,figure, or annex without any replacement text.Modification / Modify - A modification is an altering of the existing base ISO text such as the addition,replacement or deletion of c

15、ertain words or the replacement of an entire clause, subclause, table, figure,or annex of the base ISO text.APRIL 28, 2017 NATIONAL DIFFERENCES FOR UL 10377 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULNational Differences2.2DV DR Modifica

16、tion of 2.2 to add the following note:Note: The Canada Consumer Product Safety Act, Section 2 defines a “consumer product”as follows:consumer product means a product, including its components, parts or accessories, thatmay reasonably be expected to be obtained by an individual to be used fornon-comm

17、ercial purposes, including for domestic, recreational and sports purposes, andincludes its packaging. (produit de consommation)4.6.1DV DR Modification of 4.6.1 by revising the first sentence as follows:Add “installing,” after the word “assembling”.4.6.3DV DR Modification of 4.6.3 by revising the first sentence of the first paragraph asfollows:Add “installation,” after the word “assembly”.5.1DV DR Modification of 5.1 by replacing the first item in the first paragraph with thefollowing:- harm to consumers;APRIL 28, 2017NATIONAL DIFFERENCES FOR UL 103774