UL 1058-2006 UL Standard for Safety Halogenated Agent Extinguishing System Units (Fourth Edition)《卤化剂灭火系统设备》.pdf

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULUL 1058ISBN 0-7629-1235-9Halogenated AgentExtinguishing System UnitsUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIA

2、L NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULUnderwriters Laboratories Inc. (UL)333 Pfingsten RoadNorthbrook, IL 60062-2096UL Standard for Safety for Halogenated Agent Extinguishing System Units, UL 1058Fourth Edition, Dated November 20, 2006Summary of TopicsThi

3、s new edition of UL 1058 is being issued through ULs electronic publishing system toensure format uniformity between the PDF and HTML versions of the document. Whilenumbering and figure placement, where appropriate, may have been updated, no substantivechanges have been incorporated in the document.

4、The UL Foreword is no longer located within the UL Standard. For information concerning the use andapplication of the requirements contained in this Standard, the current version of the UL Foreword islocated on ULStandardsInfoNet at: http:/ master for this Standard at ULs Northbrook Office is the of

5、ficial document insofar as it relates to aUL service and the compliance of a product with respect to the requirements for that product and service,or if there are questions regarding the accuracy of this Standard.ULs Standards for Safety are copyrighted by UL. Neither a printed copy of a Standard, n

6、or the distributiondiskette for a Standard-on-Diskette and the file for the Standard on the distribution diskette should bealtered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding thoseStandards shall remain the sole and exclusive property of UL.All rights reserv

7、ed. No part of this publication may be reproduced, stored in a retrieval system, ortransmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwisewithout prior permission of UL.Revisions of UL Standards for Safety are issued from time to time. A UL Standard for Saf

8、ety is currentonly if it incorporates the most recently adopted revisions.UL provides this Standard as is without warranty of any kind, either expressed or implied, including butnot limited to, the implied warranties of merchantability or fitness for any purpose.In no event will UL be liable for any

9、 special, incidental, consequential, indirect or similar damages,including loss of profits, lost savings, loss of data, or any other damages arising out of the use of or theinability to use this Standard, even if UL or an authorized UL representative has been advised of thepossibility of such damage

10、. In no event shall ULs liability for any damage ever exceed the price paid forthis Standard, regardless of the form of the claim.UL will attempt to answer support requests concerning electronic versions of its Standards. However, thissupport service is offered on a reasonable efforts basis only, an

11、d UL may not be able to resolve everysupport request. UL supports the electronic versions of its Standards only if they are used under theconditions and operating systems for which it is intended. ULs support policies may change fromtime-to-time without notification.UL reserves the right to change t

12、he format, presentation, file types and formats, delivery methods andformats, and the like of both its printed and electronic Standards without prior notice.NOVEMBER 20, 2006 UL 1058 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULPurchaser

13、s of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and holdUL harmless from and against any loss, expense, liability, damage, claim, or judgement (includingreasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing anelect

14、ronic Standard on the purchasers computer system.If a single-user version electronic Standard was purchased, one copy of this Standard may be stored onthe hard disk of a single personal computer, or on a single LAN file-server or the permanent storagedevice of a multiple-user computer in such a mann

15、er that this Standard may only be accessed by one userat a time and for which there is no possibility of multiple concurrent access.If a multiple-user version electronic Standard was purchased, one copy of the Standard may be stored ona single LAN file-server, or on the permanent storage device of a

16、 multiple-user computer, or on an Intranetserver. The number of concurrent users shall not exceed the number of users authorized.Electronic Standards are intended for on-line use, such as for viewing the requirements of a Standard,conducting a word search, and the like. Only one copy of the Standard

17、 may be printed from eachsingle-user version of an electronic Standard. Only one copy of the Standard may be printed for eachauthorized user of a multiple-user version of an electronic Standard. Because of differences in thecomputer/software/printer setup used by UL and those of electronic Standards

18、 purchasers, the printedcopy obtained by a purchaser may not look exactly like the on-line screen view or the printed Standard.An employee of an organization purchasing a UL Standard can make a copy of the page or pages beingviewed for their own fair and/or practical internal use.The requirements in

19、 this Standard are now in effect, except for those paragraphs, sections, tables, figures,and/or other elements of the Standard having future effective dates as indicated in the note following theaffected item. The prior text for requirements that have been revised and that have a future effective da

20、teare located after the Standard, and are preceded by a SUPERSEDED REQUIREMENTS notice.New product submittals made prior to a specified future effective date will be judged under all of therequirements in this Standard including those requirements with a specified future effective date, unlessthe ap

21、plicant specifically requests that the product be judged under the current requirements. However, ifthe applicant elects this option, it should be noted that compliance with all the requirements in thisStandard will be required as a condition of continued Listing, Recognition, and Follow-Up Services

22、 afterthe effective date, and understanding of this should be signified in writing.Copyright 2006 Underwriters Laboratories Inc.This Standard consists of pages dated as shown in the following checklist:Page Date1-42 .November 20, 2006SA1-SA4 .November 20, 2006NOVEMBER 20, 2006 UL 1058tr2UL COPYRIGHT

23、ED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULNOVEMBER 20, 20061UL 1058Standard for Halogenated Agent Extinguishing System UnitsFirst Edition December, 1984Second Edition October, 1989Third Edition August, 1995Fourth EditionNovember 20, 2006An effective

24、 date included as a note immediately following certain requirementsis one established by Underwriters Laboratories Inc.Revisions of this Standard will be made by issuing revised or additional pagesbearing their date of issue. A UL Standard is current only if it incorporates themost recently adopted

25、revisions, all of which are itemized on the transmittal noticethat accompanies the latest set of revised requirements. Comments or proposalsfor revisions on any part of the Standard may be submitted to UL at any time.Proposals should be submitted via a Proposal Request in ULs On-LineCollaborative St

26、andards Development System (CSDS) at http:/.ISBN 0-7629-1235-9COPYRIGHT 2006 UNDERWRITERS LABORATORIES INC.UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULNOVEMBER 20, 2006HALOGENATED AGENT EXTINGUISHING SYSTEM UNITS - UL 10582No Text on This

27、PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULCONTENTSINTRODUCTION1 Scope .52 General 53 Glossary .54 Components 75 Design Manual .76 Owners Manual 8CONSTRUCTION7 General 98 Electrically Operated Alarms 109 Controls and Indicators .1010

28、Pressure Vessels .1111 Gaskets and O Rings 1512 Filling Densities .1513 Pressure Gauges and Indicators 1514 Puncturing Mechanisms .1715 Electrically Operated Valves and Pressure Switches 1716 Siphon Tubes 1717 Halon Agents .1718 Expellant Gases 1719 Polymeric Materials and Nonmetallic Parts .18PERFO

29、RMANCE20 General 1921 Discharge Test .1922 Valve Leakage Test .1923 Hydrostatic Pressure Test .2024 30-Day Elevated Temperature Test .2125 Temperature Cycling Test .2126 Salt Spray Corrosion Test .2227 500 Cycle Operation Test 2328 Time Delay Verification Test .2329 Pressure-Operated Alarm Test .243

30、0 One-Year Time Leakage Test 2431 Mounting Device Test .2532 Area Coverage Test .2532.1 General .2532.2 Automatic extinguisher units .2733 Verification of Flow Calculation Method Test .2734 Equivalent Length Determination .2835 High Pressure Discharge Test 2936 Flexible Hose Low Temperature Test .29

31、37 Operation Test of Manual Actuators and Manual Pull Stations 2938 Pneumatic Operation Test .3039 Pressure Relief Tests .3040 Calibration Test Gauges and Indicators 31NOVEMBER 20, 2006 HALOGENATED AGENT EXTINGUISHING SYSTEM UNITS - UL 1058 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODU

32、CTION ORDISTRIBUTION WITHOUT PERMISSION FROM UL41 Burst Strength Test Gauges and Indicators 3142 Overpressure Test Gauges .3143 Impulse Test Gauges 3244 Pressure Gauge Relief Test 3245 Water Resistance Test Gauges and Indicators .3246 Liquid Level Indicators .3247 Elastomeric Parts Test 3348 10-Day

33、Moist Ammonia Air Stress Cracking Test .3349 Aging Tests Plastic Materials .3449.1 Air-oven aging test .3449.2 Exposure to extinguishing agent test .3549.3 Light and water test 3550 Nameplate Exposure Tests 3651 Nameplate Adhesion Test .3652 Nameplate Abrasion Test 37MANUFACTURING AND PRODUCTION TES

34、TS53 General 3753.1 General .3753.2 Hydrostatic pressure test shells 3753.3 Gauge calibration test 3853.4 Leakage test .3853.5 Halon .38MARKING54 General 3855 Manuals .4056 Placards .40INSTALLATION INSTRUCTION57 Installation, Operation, and Maintenance Instruction Manual .40SUPPLEMENT SA - MARINE-TY

35、PE HALOGENATED AGENT EXTINGUISHING SYSTEM UNITSSA1 Scope SA1SA2 Installation, Operation, and Maintenance Instruction Manual SA1SA3 Wiring SA1SA4 Controls and Indicators .SA1SA5 Pressure Vessels SA2SA6 Salt Spray Corrosion Test SA2SA7 Vibration and Shock Resistance Test SA2SA7.1 General SA2SA7.2 Vibr

36、ation test .SA3SA7.3 Shock resistance test SA3SA8 Area Coverage Test .SA4SA9 Aging Tests Polymeric Materials .SA4SA10 Marking .SA4NOVEMBER 20, 2006HALOGENATED AGENT EXTINGUISHING SYSTEM UNITS - UL 10584UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION

37、FROM ULINTRODUCTION1 Scope1.1 These requirements cover the construction and operation of halogenated agent fire extinguishingsystem units intended to be installed, inspected, tested, and maintained in accordance with the Standardfor Halon 1301 Fire Extinguishing Systems, NFPA 12A and with the Standa

38、rd for Halon 1211 FireExtinguishing Systems, NFPA 12B.1.2 These requirements also cover halogenated automatic extinguisher units that do not have a manualmeans of operation, and are intended to be used in accordance with the manufacturers installationinstructions. Automatic extinguisher units are no

39、t intended:a) For use as a general substitute for preengineered or engineered halon extinguishing systemunits; orb) For protection of fire risks larger than those specified in the manufacturers instructions for asingle unit by using multiple units.1.3 A product that contains features, characteristic

40、s, components, materials, or systems new or differentfrom those in use when the standard was developed, and that involves a risk of fire, electric shock, orinjury to persons shall be evaluated using the appropriate additional component and end-productrequirements as determined necessary to maintain

41、the level of safety for the user of the product asoriginally anticipated by the intent of this standard.2 General2.1 If a value for measurement is followed by a value in other units in parentheses, the second value maybe only approximate. The first stated value is the requirement.2.2 Where these req

42、uirements reference extinguishing system unit, the requirements also apply toautomatic extinguisher units unless specifically noted otherwise.3 Glossary3.1 For the purpose of these requirements, the following definitions apply.3.2 AUTOMATIC EXTINGUISHER UNIT A unit that:a) Has no manual means of act

43、uation and discharges extinguishing agent upon thermalactuation; andb) Is intended for use in normally unoccupied spaces.3.3 CYLINDER/VALVE ASSEMBLY A container that incorporates a valve and which provides storageof the extinguishing agent and expellant (if applicable) until the valve is actuated. W

44、hen actuated, thevalve releases the agent into the distribution network of the extinguishing system.3.4 DISCHARGE NOZZLE A device that is used to uniformly distribute the extinguishing agent:a) Over a specific area; orb) Within a specific volume; or both.NOVEMBER 20, 2006 HALOGENATED AGENT EXTINGUIS

45、HING SYSTEM UNITS - UL 1058 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM UL3.5 DISCHARGE TIME The time interval between the first appearance of liquid at the nozzle and thetime at which the discharge becomes predominantly gaseous.3.6 ENGINEE

46、RED SYSTEM A system that requires individual calculation and design, in accordancewith the extinguishing system unit manufacturers instructions, to determine the flow rates, nozzlepressures, quantities of halon, and number and types of nozzles for effective extinguishing agentdistribution and fire c

47、overage.3.7 EXPELLANT GAS Dry nitrogen used to facilitate the discharge of the extinguishing agent at lowtemperatures.3.8 EXTINGUISHING SYSTEM UNIT Identified components that can be assembled into a system forthe discharge of an extinguishing agent through fixed piping and nozzles for the purpose of

48、extinguishing fires.3.9 HALON 1211 (BROMOCHLORODI-FLUOROMETHANE, CBrClF2) A colorless, faintly sweet-smelling, and electrically nonconductive gas used as an extinguishing agent.3.10 HALON 1301 (BROMOTRIFLUORO-METHANE, CBrF3) A colorless, practically odorless, andelectrically nonconductive gas used a

49、s an extinguishing agent.3.11 MANUAL MEANS OF ACTUATION A means of system actuation in which the system operatorinitiates system discharge, either mechanically or electrically.3.12 MASTER VALVE A discharge valve that upon automatic or manual actuation operates othervalves or devices in an extinguishing system.3.13 OPERABLE PRESSURE RANGE The pressure range corresponding to the pressures in thestorage container at the specified minimum and maximum temper