UL 1101-1999 UL Standard for Safety Solidified Fuel Cooking Appliances for Marine Use《船上使用的固体燃料烹饪设备》.pdf

1、LLOL-ENGL 1777 _- 7275775 077b3Ll BLl5 O UL Il01 ISBN 0-7629-0417-8 .- ,- _. el Cooking for Marine Use STD-UL 11DL-ENGL L999 = 9275795 077b312 781 W Underwriters laboratories 1nc.o Northbrook, Illinois (847) 272-8800 Melville, New York. (516) 271-6200 Santa Clara, California (408) 985-2400 Research

2、Triangle Park, North Carolina*(919) 549-1400 Camas, Washington * (360) 81 7-5500 Undriters Laboratories Inc., founded in 1894, is chartered as a not-for-profit organization without capital stock, under the laws of the State of Delaware, to establish, maintain, and operate laboratories for the examin

3、ation and testing of devices, systems and materials to determine their relation to hazards to life and property, and to ascertain, define and publish standards, classifications and specifications for materials, devices, products, equipment, constructions, methods, and systems affecting such hazards.

4、 UL Standards for Safety are developed under a procedure which provides for participation and comment from the affected public as well as industry. The procedure takes into consideration a survey of known existing standards and the needs and opinions of a wide variety of interests concerned with the

5、 subject matter of the standard. Thus manufacturers, consumers, individuals associated . with consumer-oriented organizations, academicians, government officials, industrial and commercial users, inspection authorities, insurance interests and others provide input to UL in the formulating of UL Stan

6、dards for Safety, to keep them consonant with social and technological advances. A not-for-profit organization dedicated to public safety and committed to quality service STD-UL LLDL-ENGL 1797 = 9275775 077b3L3 bLB APRIL 5. 1999 - UL 1101 trl Underwriters Laboratories Inc. (UL) 333 Pfingsten Road No

7、rthbrook, IL 60062-2096 UL Standard for Safety for Solidified Fuel Cooking Appliances for Marine Use, UL 1101 Second Edition, Dated April 5, 1999 The master for this Standard at UL?s Northbrook Office is the official document insofar as it relates to a UL service and the compliance of a product with

8、 respect to the requirements for that product and service, or if there are questions regarding the accuracy of this Standard. UL?s Standards for Safety are copyrighted by UL. Neither a printed copy of a Standard, nor the distribution diskette for a Standard-on-Diskette and the file for the Standard

9、on the distribution diskette should be altered in any way. All of UL?s Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system.

10、or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. Revisions of UL Standards for Safety are issued from time to time. A UL Standard for Safety is current only if it incorporates the most recently adopted revisions. UL

11、 provides this Standard ?as is? without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or fitness for any purpose. In no event will UL be liable for any special. incidental, consequential, indirect or similar damages, includ

12、ing loss of profits, lost savings, loss of data. or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall UL?s liability for any damage ever exceed the pri

13、ce paid for this Standard, regardless of the form of the claim. UL will attempt to answer support requests concerning WordPerfect. Envoy, and Standards-on-Diskette. However, this support service is offered on a reasonable efforts basis only, and UL may not be able to resolve every support request UL

14、 supports a Standards-on-Diskette only if it is used under the conditions and operating systems for which it is intended UL?c support policies may change from time-to-time without notification UL reserves the right to change the format, presentation, file types and formats, delivery methods and form

15、ats, and the like of both its printed and electronic Standards without prior notice. Standards-on-Diskette purchasers agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim. or judgement (including reasonable attorney?s fees) resulting from any

16、error or deviation introduced while purchaser is storing a Standard-on-Diskette on the purchaser?s computer system. If a single-user version Standards-on-Diskette was purchased, one copy of this Standard may be stored on the hard disk of a single personal computer, or on a single LAN file-server or

17、the permanent storage device of a multiple-user computer in such a manner that this Standard may only be accessed by one user at a time and for which there is no possibility of multiple concurrent access. The original distribution diskette should be stored in a safe place. STD-UL 1101-ENGL 1777 9275

18、795 077b31Li 55Li I APRIL 5. 1999 - UL 1101 tr2 If a multiple-user version Standards-on-Diskette was purchased, one copy of the Standard may be stored on a single LAN file-server, or on the permanent storage device of a multiple-user computer. The number of concurrent users shall not exceed the numb

19、er of users authorized for the Standards-on-Diskette version. The original distribution diskette should be stored in a safe place. Standards-on-Diskette are intended for on-line use, such as for viewing the requirements of a Standard, conducting a word search, and the like. Only one copy of the Stan

20、dard may be printed from each single-user version of a Standards-on-Diskette. Only one copy of the Standard may be printed for each authorized user of a multiple-user version of a Standards-on-Diskette. An employee of an organization purchasing a Standard-on-Diskette can make a copy of the page or p

21、ages being viewed for their own fair and/or practical internal use. Because of differences in the computer/software/printer setup used by UL and those of Standards-on-Diskette purchasers, the printed copy obtained by a purchaser may not look exactly like the on-line screen view or the printed Standa

22、rd. The requirements in this Standard are now in effect, except for those paragraphs, sections, tables, figures, and/or other elements of the Standard having future effective dates as indicated in the note following the affected item. The prior text for requirements that have been revised and that h

23、ave a future effective date are located after the Standard, and are preceded by a ”SUPERSEDED REQUIREMENTS” notice. New product submittals made prior to a specified future effective date will be judged under all of the requirements in this Standard including those requirements with a specified futur

24、e effective date, unless the applicant specifically requests that the product be judged under the current requirements. However, if the applicant elects this option, it should be noted that compliance with all the requirements in this Standard will be required as a condition of continued Listing and

25、 Follow-Up Services after the effective date, and understanding of this should be signified in writing. Copyright O 1999 Underwriters Laboratories Inc. This Standard consists of pages dated as shown in the following checklist: Page Date 1-1 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

26、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . April 5, 1999 APRIL 5, 1999 1 UL 1101 Standard for Solidified Fuel Cooking Appliances for Marine Use First Edition - September, 1989 Second Edition April 5, 1999 An effective date included as a note imm

27、ediately following certain requirements is one established by Underwriters Laboratories Inc. Revisions of this Standard will be made by issuing revised or additional pages bearing their date of issue. A UL Standard is current only if it incorporates the most recently adopted revisions, all of which

28、are itemized on the transmittal notice that accompanies the latest set of revised requirements. ISBN 0-7629-0417-8 I COPYRIGHT O 1999 UNDERWRITERS LABORATORIES INC. STD-UL L1OL-ENGL 1999 m 9275795 077b3Lb 327 m 2 SOLIDIFIED FUEL COOKING APPLIANCES FOR MARINE USE - UL 1101 APRIL 5. 1999 No Text on Th

29、is Page STD-UL ILCIL-ENGL 1999 7275795 077b317 2b3 = APRIL 5. 1999 SOLIDIFIED FUEL COOKING APPLIANCES FOR MARINE USE - UL 1101 3 CONTENTS FOREWORD 4 INTRODUCTION 1 Scope 5 2 General 5 2.1 Units of measure 5 2.2 Terminology 3 Components 5 . CONSTRUCTION .6 4 General . . 5 Frame and Enclosure . . 6 6

30、Operating Controls . .7 7 Burner Assembly . 7 8 Fuel Containment 8 9 Corrosion Protection . .8 10 Gimbaled Units . 8 11 Electrical Components 8 . PERFORMANCE 12 General . . 9 13 Vibration Test . .9 14 ShockTest 9 15 Operation Test .10 16 Temperature Test . . 10 16.1 General 10 16.2 Temperature test

31、ameters . .11 16.3 Controls . 12 16.4 Contact surfaces . 12 16.5 Adjacent surfaces . . . 12 . . . 17 Tests on electric parts . 19 Tests on Gimbal Mounted Appliances . 13 20 Salt-Spray Corrosion Test .13 18 Tests on Solidified Fuel MARKING 21 General 13 OPERATING AND INSTALLATION INSTRUCTIONS 22 Gene

32、ral 14 STD-UL LLOL-ENGL vm m 7275775 07711, LTT m 4 SOLIDIFIED FUEL COOKING APPLIANCES FOR MARINE USE - UL 1101 APRIL 5. 1999 FOREWORD A. This Standard contains basic requirements for products covered by Underwriters Laboratories Inc. (UL) under its Follow-Up Service for this category within the lim

33、itations given below and in the Scope section of this Standard. These requirements are based upon sound engineering principles, research, records of tests and field experience, and an appreciation of the problems of manufacture, installation, and use derived from consultation with and information ob

34、tained from manufacturers, users, inspection authorities, and others having specialized experience. They are subject to revision as further experience and investigation may show is necessary or desirable. B. The observance of the requirements of this Standard by a manufacturer is one of the conditio

35、ns of the continued coverage of the manufacturers product. C. A product which complies with the text of this Standard will not necessarily be judged to comply with the Standard if, when examined and tested, it is found to have other features which impair the level of safety contemplated by these req

36、uirements. D. A product employing materials or having forms of construction which conflict with specific requirements of the Standard cannot be judged to comply with the Standard. A product employing materials or having forms of construction not addressed by this Standard may be examined and tested

37、according to the intent of the requirements and, if found to meet the intent of this Standard, may be judged to comply with the Standard. E. UL, in performing its functions in accordance with its objectives, does not assume or undertake to discharge any responsibility of the manufacturer or any othe

38、r party. The opinions and findings of UL represent its professional judgment given with due consideration to the necessary limitations of practical operation and state of the art at the time the Standard is processed. UL shall not be responsible to anyone for the use of or reliance upon this Standar

39、d by anyone. UL shall not incur any obligation or liability for damages, including consequential damages, arising out of or in connection with the use, interpretation of, or reliance upon this Standard. F. Many tests required by the Standards of UL are inherently hazardous and adequate safeguards fo

40、r personnel and property shall be employed in conducting such tests. APRIL 5. 1999 SOLIDIFIED FUEL COOKING APPLIANCES FOR MARINE USE - UL 1101 5 INTRO DU CTION 1 Scope 1.1 The requirements in this standard apply to the construction and performance characteristics of solidified fuel cooking appliance

41、s for use on boats, including counter-top assemblies. insert surface assemblies, insert ovens, and ranges (surface cooking units and ovens included in the one appliance) 1.2 Solidified fuel cooking appliances covered in this standard are intended for installation in accordance with the applicable st

42、andards of the American Boat and Yacht Council, and with the Fire Protection Standard for Pleasure and Commercial Motor Craft. NFPA 302. and with the Code of Federal Regulations (CFR), Title 33. 1.3 These requirements do not cover cooking appliances using wood, coal, charcoal. or vapor or gaseous fu

43、els. 1.4 A product that contains features, characteristics, components, materials, or systems new or different from those covered by the requirements in this standard, and that involves a risk of fire, electric shock, or injury to persons shall be evaluated using the appropriate additional component

44、 and end-product requirements as determined necessary to maintain the acceptable level of safety as originally anticipated by the intent of this standard. A product whose features, characteristics, components, materials, or systems conflict with specific requirements or provisions of this standard c

45、annot be judged to comply with this standard. Where considered appropriate, revision of requirements shall be proposed and adopted in conformance with the methods employed for development, revision, and implementation of this standard. 2 General 2.1 Units of measurement 2.1.1 If a value for measurem

46、ent is followed by a value in other units in parentheses, the second value may be only approximate. The first stated value is the requirement. 2.2 Terminology 2.2.1 The term “cooking appliance“ refers to all solidified fuel cooking appliances. 3 Components 3.1 Except as indicated in 3.2, a component

47、 of a cooking appliance covered by this standard shall comply with the requirements for that component. 3.2 A component need not comply with a specific requirement that: a) Involves a feature or characteristic not needed in the application of the component in the product covered by this standard, or

48、 b) Is superseded by a requirement in this standard. 3.3 A component shall be used in accordance with its recognized rating established for the intended conditions of use. STD-UL IIOI-ENGL 1777 W 7275775 077b320 656 9 6 SOLIDIFIED FUEL COOKING APPLIANCES FOR MARINE USE - UL 1101 APRIL 5. 1999 3.4 Sp

49、ecific components are recognized as being incomplete in construction features or restricted in performance capabilities. Such components are intended for use only under limited conditions, such as certain temperatures not exceeding specified limits, and shall be used only under those specific conditions for which they have been recognized. CONSTRUCTION 4 General 4.1 Means shall be provided for properly mounting the cooking appliance. The mounting means shall be of a type and located so that proper installation can be made using normal hand tools (any standard wrench or