UL 1316-1994 Ul Standard for Safety Glass-Fiber-Reinforced Plastic Underground Storage Tanks for Petroleum Products Alcohols and Alcohol-Gasoline Mixtures (Second Edition Reprint w.pdf

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULUL 1316ISBN 1-55989-462-8Glass-Fiber-Reinforced PlasticUnderground Storage Tanksfor Petroleum Products,Alcohols, and Alcohol-GasolineMixturesUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REP

2、RODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULUnderwriters Laboratories Inc. (UL)333 Pfingsten RoadNorthbrook, IL 60062-2096UL Standard for Safety for Glass-Fiber-Reinforced Plastic Undergro

3、und Storage Tanks for PetroleumProducts, Alcohols, and Alcohol-Gasoline Mixtures, UL 1316Second Edition, Dated January 7, 1994Revisions: This Standard contains revisions through and including May 12, 2006.Summary of TopicsThe revisions dated May 12, 2006, were issued to delete the ANSI approval info

4、rmation from thetitle page.The UL Foreword is no longer located within the UL Standard. For information concerning the use andapplication of the requirements contained in this Standard, the current version of the UL Foreword islocated on ULStandardsInfoNet at: http:/ Standards for Safety are develop

5、ed and maintained in the Standard Generalized Markup Language(SGML). SGML - an international standard (ISO 8879-1986) - is a descriptive markup language thatdescribes a documents structure and purpose, rather than its physical appearance on a page. Due toformatting differences resulting from the use

6、 of ULs new electronic publishing system, please note thatadditional pages (on which no requirements have been changed) may be included in revision pages dueto relocation of existing text and reformatting of the Standard.Text that has been changed in any manner is marked with a vertical line in the

7、margin. Changes inrequirements are marked with a vertical line in the margin and are followed by an effective date noteindicating the date of publication or the date on which the changed requirement becomes effective.The master for this Standard at ULs Northbrook Office is the official document inso

8、far as it relates to aUL service and the compliance of a product with respect to the requirements for that product and service,or if there are questions regarding the accuracy of this Standard.ULs Standards for Safety are copyrighted by UL. Neither a printed copy of a Standard, nor the distributiond

9、iskette for a Standard-on-Diskette and the file for the Standard on the distribution diskette should bealtered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding thoseStandards shall remain the sole and exclusive property of UL.All rights reserved. No part of this

10、publication may be reproduced, stored in a retrieval system, ortransmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwisewithout prior permission of UL.Revisions of UL Standards for Safety are issued from time to time. A UL Standard for Safety is currentonly i

11、f it incorporates the most recently adopted revisions.UL provides this Standard as is without warranty of any kind, either expressed or implied, including butnot limited to, the implied warranties of merchantability or fitness for any purpose.MAY 12, 2006 UL 1316 tr1UL COPYRIGHTED MATERIAL NOT AUTHO

12、RIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULIn no event will UL be liable for any special, incidental, consequential, indirect or similar damages,including loss of profits, lost savings, loss of data, or any other damages arising out of the use of or theinability to use t

13、his Standard, even if UL or an authorized UL representative has been advised of thepossibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid forthis Standard, regardless of the form of the claim.UL will attempt to answer support requests concerning electro

14、nic versions of its Standards. However, thissupport service is offered on a reasonable efforts basis only, and UL may not be able to resolve everysupport request. UL supports the electronic versions of its Standards only if they are used under theconditions and operating systems for which it is inte

15、nded. ULs support policies may change fromtime-to-time without notification.UL reserves the right to change the format, presentation, file types and formats, delivery methods andformats, and the like of both its printed and electronic Standards without prior notice.Purchasers of the electronic versi

16、ons of ULs Standards for Safety agree to defend, indemnify, and holdUL harmless from and against any loss, expense, liability, damage, claim, or judgement (includingreasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing anelectronic Standard on the pur

17、chasers computer system.If a single-user version electronic Standard was purchased, one copy of this Standard may be stored onthe hard disk of a single personal computer, or on a single LAN file-server or the permanent storagedevice of a multiple-user computer in such a manner that this Standard may

18、 only be accessed by one userat a time and for which there is no possibility of multiple concurrent access.If a multiple-user version electronic Standard was purchased, one copy of the Standard may be stored ona single LAN file-server, or on the permanent storage device of a multiple-user computer,

19、or on an Intranetserver. The number of concurrent users shall not exceed the number of users authorized.Electronic Standards are intended for on-line use, such as for viewing the requirements of a Standard,conducting a word search, and the like. Only one copy of the Standard may be printed from each

20、single-user version of an electronic Standard. Only one copy of the Standard may be printed for eachauthorized user of a multiple-user version of an electronic Standard. Because of differences in thecomputer/software/printer setup used by UL and those of electronic Standards purchasers, the printedc

21、opy obtained by a purchaser may not look exactly like the on-line screen view or the printed Standard.An employee of an organization purchasing a UL Standard can make a copy of the page or pages beingviewed for their own fair and/or practical internal use.The requirements in this Standard are now in

22、 effect, except for those paragraphs, sections, tables, figures,and/or other elements of the Standard having future effective dates as indicated in the note following theaffected item. The prior text for requirements that have been revised and that have a future effective dateare located after the S

23、tandard, and are preceded by a SUPERSEDED REQUIREMENTS notice.New product submittals made prior to a specified future effective date will be judged under all of therequirements in this Standard including those requirements with a specified future effective date, unlessthe applicant specifically requ

24、ests that the product be judged under the current requirements. However, ifthe applicant elects this option, it should be noted that compliance with all the requirements in thisStandard will be required as a condition of continued Listing and Follow-Up Services after the effectivedate, and understan

25、ding of this should be signified in writing.Copyright 2006 Underwriters Laboratories Inc.MAY 12, 2006 UL 1316tr2UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULThis Standard consists of pages dated as shown in the following checklist:Page Date

26、1-6B May12,20067 April 2, 19968 .January 7, 19949 April 2, 199610-11May12,200612-13 April 2, 199614January 7, 199415-16 April 2, 1996MAY 12, 2006 UL 1316 tr3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULMAY 12, 2006 UL 1316tr4No Text on This

27、 PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULJANUARY 7, 1994(Title Page Reprinted: May 12, 2006)1UL 1316Glass-Fiber-Reinforced Plastic Underground Storage Tanks for PetroleumProducts, Alcohols, and Alcohol-Gasoline MixturesThe First ed

28、ition was titled Glass-Fiber-Reinforced Plastic Underground StorageTanks for Petroleum Products.First Edition July, 1983Second EditionJanuary 7, 1994An effective date included as a note immediately following certain requirementsis one established by Underwriters Laboratories Inc.Revisions of this St

29、andard will be made by issuing revised or additional pagesbearing their date of issue. A UL Standard is current only if it incorporates themost recently adopted revisions, all of which are itemized on the transmittal noticethat accompanies the latest set of revised requirements.ISBN 1-55989-462-8COP

30、YRIGHT 1983, 2006 UNDERWRITERS LABORATORIES INC.UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULMAY 12, 2006UL 13162No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULCO

31、NTENTSINTRODUCTION1 Scope .52 General 52.1 Units of measurement .52.2 Components .62.3 Undated references .6CONSTRUCTION3 General 64 Pipe Connections 6A5 Manholes 76 Deflection Plates 7PERFORMANCE7 General 78 Leakage Test .89 Strength of Pipe Fittings Tests 89.1 Torque 09.2 Bending moment .09.3 Leak

32、age .010 Strength of Lifting Fittings Tests .911 Water-Load Test 1012 External Pressure Test 1013 Internal Pressure Test .1014 Physical Properties of Materials Tests .1014.1 General .1014.2 Air-oven aging .1114.3 Physical properties .1114.4 Immersion .1114.5 Impact and cold exposure 014.6 Light and

33、water exposure .015 Earth-Load Test 1416 Annulus Proof-Pressure Test .14MANUFACTURING AND PRODUCTION TESTS17 Leakage Test 1418 Internal Vacuum Test .1519 Surface Cure Test 15MARKING20 General 1521 Installation Instructions 1622 Documentation .16MAY 12, 2006 UL 1316 3UL COPYRIGHTED MATERIAL NOT AUTHO

34、RIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULThis page intentionally left blank.MAY 12, 2006UL 13164UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULINTRODUCTION1 Scope1.1 These requirements cover spherical or horizon

35、tal cylindrical, atmospheric-type tanks ofglass-fiber-reinforced plastic (FRP) that are intended for the underground storage of petroleum-basedflammable and combustible liquids, alcohols, and alcohol-blended fuels.1.2 These requirements cover tanks of either single- or double-wall construction. A do

36、uble-wall tank is atank within a tank, capable of being provided with means to detect a leak in either tank.1.3 These tanks are completely assembled and tested for leakage before shipment.1.4 These tanks are intended for installation and use in accordance with the Standard for the Installationof Oil

37、-Burning Equipment, NFPA 31, the Flammable and Combustible Liquids Code, NFPA 30; and themanufacturers instructions.1.5 These requirements do not cover optional accessories for these tanks, such as heating coils orhotwells; nor do they cover compartmented tanks.1.6 A product that contains features,

38、characteristics, components, materials, or systems new or differentfrom those covered by the requirements in this standard, and that involves a risk of fire, electric shock, orinjury to persons shall be evaluated using the appropriate additional component and end-productrequirements as determined ne

39、cessary to maintain the acceptable level of safety as originally anticipatedby the intent of this standard. A product whose features, characteristics, components, materials, orsystems conflict with specific requirements or provisions of this standard cannot be judged to comply withthis standard. Whe

40、re considered appropriate, revision of requirements shall be proposed and adopted inconformance with the methods employed for development, revision, and implementation of this standard.1.6 revised April 2, 19962 General2.1 Units of measurement2.1.1 When a value for measurement is followed by a value

41、 in other units in parentheses, the second unitis only approximate. The first stated value is the requirement.2.1.1 revised April 2, 1996MAY 12, 2006 UL 1316 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM UL2.2 Components2.2.1 Except as indica

42、ted in 2.2.2, a component of a product covered by this standard shall comply withthe requirements for that component.2.2.2 A component of a product covered by this standard shall comply with the requirements for thatcomponent and shall be used in accordance with its approved rating and other limitat

43、ions of use. Acomponent is not required to comply with a specific requirement that:a) Involves a feature or characteristic not required in the application of the component in aproduct covered by this standard, orb) Is superseded by a requirement in this standard.2.2.2 revised April 2, 19962.2.3 A co

44、mponent shall be used in accordance with its approved rating established for the intendedconditions of use.2.2.4 Specific components are approved as being incomplete in construction features or restricted inperformance capabilities. Such components are intended for use only under limited conditions,

45、 such ascertain temperatures not exceeding specified limits, and shall be used only under those specific conditionsfor which they have been approved.2.2.4 revised April 2, 19962.3 Undated references2.3.1 Any undated reference to a code or standard appearing in the requirements of this standard shall

46、be interpreted as referring to the latest edition of that code or standard.CONSTRUCTION3 General3.1 A tank shall be provided with one or more lugs for lifting that are attached to the tank or can beattached to a fitting on the tank. Also, see Strength of Lifting Fittings Tests, Section 10.3.2 A tank

47、 shall be capable of being anchored.MAY 12, 2006UL 13166UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM UL4 Pipe Connections4.1 A fitting for pipe connection shall be a standard threaded pipe coupling (see the Standard for Weldedand Seamless Wro

48、ught Steel Pipe, ANSI/ASME B36.10-1985), a threaded flange, a standard half pipenipple, or a bolted and gasketed flanged connection. The connection shall be bonded directly to the tank.4.2 All openings in a tank shall be located in the top. They shall be located on the longitudinal centerlineof the

49、top when the tank is cylindrical. When the tank is spherical, the openings shall be located on thevertical centerline of the tank.Exception: When the application of a tank is such that openings in the top for pipe connection arerequired to be grouped, the openings shall be located not more than 12 inches (305 mm) from thelongitudinal centerline of the top of a cylindrical tank or the vertical centerline of a spherical tank. Thisexception applies when the upper end of each pipe coupling or other fitting for