UL 1681 CRD-2013 UL Standard for Safety Wiring Device Configurations - Section Paragraph Reference New Figure C3 2 Subject 2-Pole 3-Wire grounding-type Attachment Plug Rated 15 A .pdf

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULUNDERWRITERS LABORATORIES INC. CERTIFICATION REQUIREMENT DECISIONThis Certification Requirement Decision is prepared and published by Underwriters Laboratories Inc.(UL). It is normative for the a

2、pplicable UL Product Certification Program(s); however, it is currently notpart of the UL Standard(s) referenced below.Product Category (CCN): AXUT, AXUT2, AXUT3Standard Number: UL 1681Standard Title: Standard for Wiring Device ConfigurationsEdition Date: April 10, 2012Edition Number: 4Section / Par

3、agraph Reference: New Figure C3.2Subject: 2-Pole, 3-Wire grounding-type, Attachment Plug Rated 15 A, 125 Vemploying polarized neutral blade profileDECISION:Addition of Figure C3.2 denoting the configuration of a 2-pole, 3-wire, grounding type, attachment plugrated 15 A, 125 V employing a polarized n

4、eutral blade profile. See below:This is generated text for figtxt.Figure C3.22-pole, 3-wire grounding attachment plugAttachment Plug Only Rated 15 A, 125 VUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULRATIONALE FOR DECISION:In addition to th

5、e applicable requirements contained in UL 817 and other Wiring Device Standards thatreference UL 1681, the Standard for Wiring Device configurations, the attached drawing is intended toillustrate the dimensional details of a 2-pole, 3-wire, grounding type attachment plug rated 15 A, 125 Vemploying a

6、 polarized neutral blade profile.Copyright 2013 Underwriters Laboratories Inc.UL, in performing its functions in accordance with its objectives, does not guarantee or warrant thecorrectness of Certification Requirement Decisions it may issue or that they will be recognized or adoptedby anyone. Certi

7、fication Requirement Decisions are the opinion of Underwriters Laboratories Inc. inpractically applying the requirements of the standard. They do not represent formal interpretations of thestandard under American National Standards Institute (ANSI) processes. UL shall not be responsible toanyone for

8、 the use of or reliance upon Certification Requirement Decisions by anyone. UL shall not incurany obligation or liability for damages, including consequential damages, arising out of or in connectionwith the use or reliance upon Certification Requirement Decisions. The electronic version of theCertification Requirement Decision is the current version and previously printed copies may be outdated.This document is published as a service to ULs certification customersSTANDARD NUMBER: UL 1681 -2-