UL 1711-2006 UL Standard for Safety Amplifiers for Fire Protective Signaling Systems (Fourth Edition)《防火信号系统用扩音器》.pdf

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULUL 1711ISBN 0-7629-1282-0Amplifiers for Fire ProtectiveSignaling SystemsUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MAT

2、ERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULUnderwriters Laboratories Inc. (UL)333 Pfingsten RoadNorthbrook, IL 60062-2096UL Standard for Safety for Amplifiers for Fire Protective Signaling Systems, UL 1711Fourth Edition, Dated December 28, 2006Summary of T

3、opicsThis new edition of UL 1711 is being issued through ULs electronic publishing system toensure format uniformity between the PDF and HTML versions of the document. Whilenumbering and figure placement, where appropriate, may have been updated, no substantivechanges have been incorporated in the d

4、ocument.The UL Foreword is no longer located within the UL Standard. For information concerning the use andapplication of the requirements contained in this Standard, the current version of the UL Foreword islocated on ULStandardsInfoNet at: http:/ master for this Standard at ULs Northbrook Office i

5、s the official document insofar as it relates to aUL service and the compliance of a product with respect to the requirements for that product and service,or if there are questions regarding the accuracy of this Standard.ULs Standards for Safety are copyrighted by UL. Neither a printed copy of a Sta

6、ndard, nor the distributiondiskette for a Standard-on-Diskette and the file for the Standard on the distribution diskette should bealtered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding thoseStandards shall remain the sole and exclusive property of UL.All right

7、s reserved. No part of this publication may be reproduced, stored in a retrieval system, ortransmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwisewithout prior permission of UL.Revisions of UL Standards for Safety are issued from time to time. A UL Standard

8、 for Safety is currentonly if it incorporates the most recently adopted revisions.UL provides this Standard as is without warranty of any kind, either expressed or implied, including butnot limited to, the implied warranties of merchantability or fitness for any purpose.In no event will UL be liable

9、 for any special, incidental, consequential, indirect or similar damages,including loss of profits, lost savings, loss of data, or any other damages arising out of the use of or theinability to use this Standard, even if UL or an authorized UL representative has been advised of thepossibility of suc

10、h damage. In no event shall ULs liability for any damage ever exceed the price paid forthis Standard, regardless of the form of the claim.UL will attempt to answer support requests concerning electronic versions of its Standards. However, thissupport service is offered on a reasonable efforts basis

11、only, and UL may not be able to resolve everysupport request. UL supports the electronic versions of its Standards only if they are used under theconditions and operating systems for which it is intended. ULs support policies may change fromtime-to-time without notification.UL reserves the right to

12、change the format, presentation, file types and formats, delivery methods andformats, and the like of both its printed and electronic Standards without prior notice.DECEMBER 28, 2006 UL 1711 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULP

13、urchasers of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and holdUL harmless from and against any loss, expense, liability, damage, claim, or judgement (includingreasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing

14、 anelectronic Standard on the purchasers computer system.If a single-user version electronic Standard was purchased, one copy of this Standard may be stored onthe hard disk of a single personal computer, or on a single LAN file-server or the permanent storagedevice of a multiple-user computer in suc

15、h a manner that this Standard may only be accessed by one userat a time and for which there is no possibility of multiple concurrent access.If a multiple-user version electronic Standard was purchased, one copy of the Standard may be stored ona single LAN file-server, or on the permanent storage dev

16、ice of a multiple-user computer, or on an Intranetserver. The number of concurrent users shall not exceed the number of users authorized.Electronic Standards are intended for on-line use, such as for viewing the requirements of a Standard,conducting a word search, and the like. Only one copy of the

17、Standard may be printed from eachsingle-user version of an electronic Standard. Only one copy of the Standard may be printed for eachauthorized user of a multiple-user version of an electronic Standard. Because of differences in thecomputer/software/printer setup used by UL and those of electronic S

18、tandards purchasers, the printedcopy obtained by a purchaser may not look exactly like the on-line screen view or the printed Standard.An employee of an organization purchasing a UL Standard can make a copy of the page or pages beingviewed for their own fair and/or practical internal use.The require

19、ments in this Standard are now in effect, except for those paragraphs, sections, tables, figures,and/or other elements of the Standard having future effective dates as indicated in the note following theaffected item. The prior text for requirements that have been revised and that have a future effe

20、ctive dateare located after the Standard, and are preceded by a SUPERSEDED REQUIREMENTS notice.New product submittals made prior to a specified future effective date will be judged under all of therequirements in this Standard including those requirements with a specified future effective date, unle

21、ssthe applicant specifically requests that the product be judged under the current requirements. However, ifthe applicant elects this option, it should be noted that compliance with all the requirements in thisStandard will be required as a condition of continued Listing, Recognition and Follow-Up S

22、ervices afterthe effective date, and understanding of this should be signified in writing.Copyright 2006 Underwriters Laboratories Inc.This Standard consists of pages dated as shown in the following checklist:Page Date1-64 .December 28, 2006A1-A2December 28, 2006DECEMBER 28, 2006 UL 1711tr2UL COPYRI

23、GHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULDECEMBER 28, 20061UL 1711Standard for Amplifiers for Fire Protective Signaling SystemsFirst Edition January, 1987Second Edition August, 1994Third Edition February, 1999Fourth EditionDecember 28, 2006An ef

24、fective date included as a note immediately following certain requirementsis one established by Underwriters Laboratories Inc.Revisions of this Standard will be made by issuing revised or additional pagesbearing their date of issue. A UL Standard is current only if it incorporates themost recently a

25、dopted revisions, all of which are itemized on the transmittal noticethat accompanies the latest set of revised requirements. Comments or proposalsfor revisions on any part of the Standard may be submitted to UL at any time.Proposals should be submitted via a Proposal Request in ULs On-LineCollabora

26、tive Standards Development System (CSDS) at http:/.ISBN 0-7629-1282-0COPYRIGHT 2006 UNDERWRITERS LABORATORIES INC.UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULDECEMBER 28, 2006AMPLIFIERS FOR FIRE PROTECTIVE SIGNALING SYSTEMS - UL 17112No Te

27、xt on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULCONTENTSINTRODUCTION1 Scope .62 General 72.1 Components .72.2 Units of measurement .72.3 Undated references .73 Glossary .8INSTRUCTIONS AND DRAWINGS4 General 8CONSTRUCTIONASSEMBLY5

28、 General 96 Protection of Service Personnel .97 Electrical Supervision .108 Enclosures 108.1 General 108.2 Openings .118.3 Cast metal 148.4 Sheet metal 158.5 Nonmetallic .178.6 Doors and covers .188.7 Screens and expanded metal .199 Electric Shock .199.1 Shock current .199.2 Antenna terminals .199.3

29、 Circuit element replacement 2010 Protection Against Corrosion .20FIELD-WIRING CONNECTIONS11 General 2112 Field-Wiring Compartment .2113 Power-Limited Circuits .2114 Field-Wiring Terminals .2214.1 General .2214.2 General application .2215 Leads .2416 Cords and Plugs 2417 Grounding .25DECEMBER 28, 20

30、06 AMPLIFIERS FOR FIRE PROTECTIVE SIGNALING SYSTEMS - UL 1711 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULINTERNAL WIRING AND ASSEMBLY18 General 2619 Separation of Circuits .2720 Bonding for Grounding 27COMPONENTS ELECTRICAL21 General 292

31、1.1 Mounting of components 2921.2 Insulating materials .2921.3 Current-carrying parts .3021.4 Bushings 3022 Overcurrent Protection 3123 Semiconductors 3124 Switches .3125 Transformers and Relays 3226 Printed-Wiring Boards .3227 Spacings 32OPERATING COMPONENTS28 General 34PERFORMANCE29 Test Samples 3

32、430 Test Voltages 3531 Waveform Analysis Test .3532 Power Input/Output Characteristics Tests 3633 Variable Voltage Operation Test 3634 Electrical Supervision Tests 3635 Harmonic Distortion Test 3735.1 Crossover .3735.2 Total harmonic .3736 Variable Ambient Temperature Test .3737 Humidity Test 3838 E

33、lectric Shock Current Test 3839 Leakage Current Test .4240 Temperature Test .4541 Overload Test 4842 Endurance Test 4843 Burnout Test .4844 Component Failure Test .4945 Abnormal Operation Test 4946 Transient Tests .5046.1 General .5046.2 Supply line transients .5047 Mechanical Strength Tests .5247.1

34、 Jarring test complete product 5247.2 Impact test glass parts 5348 Strain Relief Tests 5448.1 Flexible cords 54DECEMBER 28, 2006AMPLIFIERS FOR FIRE PROTECTIVE SIGNALING SYSTEMS - UL 17114UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM UL48.2 Fie

35、ld-wiring leads .5449 Radio-Frequency Rejection Test 5450 Power-Limited Circuits .5550.1 General .5550.2 Maximum voltage 5750.3 Maximum current .5750.4 VAmax(not inherently limited circuits only) .5851 Polymeric Materials Tests 5852 Dielectric Voltage-Withstand Test .58MANUFACTURING AND PRODUCTION T

36、ESTS53 General 5954 Production-Line Dielectric Voltage-Withstand Test 5955 Production-Line Grounding Continuity Test .60MARKING56 General 6157 Permanence of Marking .63ACCESSORY EQUIPMENT58 General 6359 Construction .6360 Performance (Installation) Test .6461 Marking 64APPENDIX AStandards for Compon

37、entsA1DECEMBER 28, 2006 AMPLIFIERS FOR FIRE PROTECTIVE SIGNALING SYSTEMS - UL 1711 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULINTRODUCTION1 Scope1.1 These requirements cover electrically- and electronically-operated amplifiers that provi

38、de speechcommunication and distinctive sounds in conjunction with fire protective signaling systems for indoorlocation in accordance with the following standards:a) National Electrical Code, NFPA 70.b) National Fire Alarm Code, NFPA 72.1.2 These requirements do not cover amplifiers for use in hazard

39、ous locations, as defined in the NationalElectrical Code, NFPA 70.1.3 These requirements do not cover commercial equipment for institutional and industrial use or theaterequipment. Commercial sound equipment is covered by the Standard for Commercial Audio Equipment,UL 813.1.4 These requirements do n

40、ot cover signal generating or processing equipment, such as tonegenerators, tape decks, microphones, and the like.1.5 These requirements do not include determination of compliance with regulations of the FederalCommunications Commission (FCC). Should products covered by these requirements be require

41、d tocomply with FCC regulations, a report of verification from the manufacturer is required as evidence ofsuch compliance.1.6 A product that contains features, characteristics, components, materials, or systems new or differentfrom those covered by the requirements in this standard, and that involve

42、s a risk of fire, electric shock, orinjury to persons shall be evaluated using the appropriate additional component and end-productrequirements to determine that the level of safety as originally anticipated by the intent of this standard ismaintained. A product whose features, characteristics, comp

43、onents, materials, or systems conflict withspecific requirements or provisions of this standard shall not be judged to comply with this standard.Where appropriate, revision of requirements shall be proposed and adopted in conformance with themethods employed for development, revision, and implementa

44、tion of this standard.DECEMBER 28, 2006AMPLIFIERS FOR FIRE PROTECTIVE SIGNALING SYSTEMS - UL 17116UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM UL2 General2.1 Components2.1.1 Except as indicated in 2.1.2, a component of a product covered by th

45、is standard shall comply withthe requirements for that component. See Appendix A for a list of standards covering componentsgenerally used in the products covered by this standard.2.1.2 A component need not comply with a specific requirement that:a) Involves a feature or characteristic not needed in

46、 the application of the component in theproduct covered by this standard orb) Is superseded by a requirement in this standard.2.1.3 A component shall be used in accordance with its recognized rating established for the intendedconditions of use.2.1.4 Specific components are recognized as being incom

47、plete in construction features or restricted inperformance capabilities. Such components are intended for use only under limited conditions, such ascertain temperatures not exceeding specified limits, and shall be used only under those specific conditionsfor which they have been recognized.2.2 Units

48、 of measurement2.2.1 If a value for measurement is followed by a value in other units in parentheses, the second valuemay be only approximate. The first stated value is the requirement.2.2.2 Unless otherwise indicated, all voltage and current values mentioned in this standard areroot-mean-square (rm

49、s).2.3 Undated references2.3.1 Any undated reference to a code or standard appearing in the requirements of this standard shallbe interpreted as referring to the latest edition of that code or standard.DECEMBER 28, 2006 AMPLIFIERS FOR FIRE PROTECTIVE SIGNALING SYSTEMS - UL 1711 7UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM UL3 Glossary3.1 For the purpose of this standard the following definitions apply.3.2 CIRCUITS, ELECTRICAL:a) High-