1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULUL 2245ISBN 0-7629-1277-4Below-Grade Vaults forFlammable Liquid StorageTanksUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED
2、 MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULUnderwriters Laboratories Inc. (UL)333 Pfingsten RoadNorthbrook, IL 60062-2096UL Standard for Safety for Below-Grade Vaults for Flammable Liquid Storage Tanks, UL 2245Second Edition, Dated December 28, 2006Sum
3、mary of TopicsThis new edition of UL 2245 is being issued through ULs electronic publishing system toensure format uniformity between the PDF and HTML versions of the document. Whilenumbering and figure placement, where appropriate, may have been updated, no substantivechanges have been incorporated
4、 in the document.The UL Foreword is no longer located within the UL Standard. For information concerning the use andapplication of the requirements contained in this Standard, the current version of the UL Foreword islocated on ULStandardsInfoNet at: http:/ master for this Standard at ULs Northbrook
5、 Office is the official document insofar as it relates to aUL service and the compliance of a product with respect to the requirements for that product and service,or if there are questions regarding the accuracy of this Standard.ULs Standards for Safety are copyrighted by UL. Neither a printed copy
6、 of a Standard, nor the distributiondiskette for a Standard-on-Diskette and the file for the Standard on the distribution diskette should bealtered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding thoseStandards shall remain the sole and exclusive property of UL.
7、All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, ortransmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwisewithout prior permission of UL.Revisions of UL Standards for Safety are issued from time to time. A UL
8、 Standard for Safety is currentonly if it incorporates the most recently adopted revisions.UL provides this Standard as is without warranty of any kind, either expressed or implied, including butnot limited to, the implied warranties of merchantability or fitness for any purpose.In no event will UL
9、be liable for any special, incidental, consequential, indirect or similar damages,including loss of profits, lost savings, loss of data, or any other damages arising out of the use of or theinability to use this Standard, even if UL or an authorized UL representative has been advised of thepossibili
10、ty of such damage. In no event shall ULs liability for any damage ever exceed the price paid forthis Standard, regardless of the form of the claim.UL will attempt to answer support requests concerning electronic versions of its Standards. However, thissupport service is offered on a reasonable effor
11、ts basis only, and UL may not be able to resolve everysupport request. UL supports the electronic versions of its Standards only if they are used under theconditions and operating systems for which it is intended. ULs support policies may change fromtime-to-time without notification.UL reserves the
12、right to change the format, presentation, file types and formats, delivery methods andformats, and the like of both its printed and electronic Standards without prior notice.DECEMBER 28, 2006 UL 2245 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION
13、 FROM ULPurchasers of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and holdUL harmless from and against any loss, expense, liability, damage, claim, or judgement (includingreasonable attorneys fees) resulting from any error or deviation introduced while purchaser i
14、s storing anelectronic Standard on the purchasers computer system.If a single-user version electronic Standard was purchased, one copy of this Standard may be stored onthe hard disk of a single personal computer, or on a single LAN file-server or the permanent storagedevice of a multiple-user comput
15、er in such a manner that this Standard may only be accessed by one userat a time and for which there is no possibility of multiple concurrent access.If a multiple-user version electronic Standard was purchased, one copy of the Standard may be stored ona single LAN file-server, or on the permanent st
16、orage device of a multiple-user computer, or on an Intranetserver. The number of concurrent users shall not exceed the number of users authorized.Electronic Standards are intended for on-line use, such as for viewing the requirements of a Standard,conducting a word search, and the like. Only one cop
17、y of the Standard may be printed from eachsingle-user version of an electronic Standard. Only one copy of the Standard may be printed for eachauthorized user of a multiple-user version of an electronic Standard. Because of differences in thecomputer/software/printer setup used by UL and those of ele
18、ctronic Standards purchasers, the printedcopy obtained by a purchaser may not look exactly like the on-line screen view or the printed Standard.An employee of an organization purchasing a UL Standard can make a copy of the page or pages beingviewed for their own fair and/or practical internal use.Th
19、e requirements in this Standard are now in effect, except for those paragraphs, sections, tables, figures,and/or other elements of the Standard having future effective dates as indicated in the note following theaffected item. The prior text for requirements that have been revised and that have a fu
20、ture effective dateare located after the Standard, and are preceded by a SUPERSEDED REQUIREMENTS notice.New product submittals made prior to a specified future effective date will be judged under all of therequirements in this Standard including those requirements with a specified future effective d
21、ate, unlessthe applicant specifically requests that the product be judged under the current requirements. However, ifthe applicant elects this option, it should be noted that compliance with all the requirements in thisStandard will be required as a condition of continued Listing, Recognition, and F
22、ollow-Up Services afterthe effective date, and understanding of this should be signified in writing.Copyright 2006 Underwriters Laboratories Inc.This Standard consists of pages dated as shown in the following checklist:Page Date1-12 .December 28, 2006DECEMBER 28, 2006 UL 2245tr2UL COPYRIGHTED MATERI
23、AL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULDECEMBER 28, 20061UL 2245Standard for Below-Grade Vaults for Flammable Liquid Storage TanksFirst Edition February, 1999Second EditionDecember 28, 2006An effective date included as a note immediately following certain
24、 requirementsis one established by Underwriters Laboratories Inc.Revisions of this Standard will be made by issuing revised or additional pagesbearing their date of issue. A UL Standard is current only if it incorporates themost recently adopted revisions, all of which are itemized on the transmitta
25、l noticethat accompanies the latest set of revised requirements. Comments or proposalsfor revisions on any part of the Standard may be submitted to UL at any time.Proposals should be submitted via a Proposal Request in ULs On-LineCollaborative Standards Development System (CSDS) at http:/.ISBN 0-762
26、9-1277-4COPYRIGHT 2006 UNDERWRITERS LABORATORIES INC.UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULDECEMBER 28, 2006BELOW-GRADE VAULTS FOR FLAMMABLE LIQUID STORAGE TANKS - UL 22452No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FO
27、R FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULCONTENTSINTRODUCTION1 Scope .42 General 52.1 Components .52.2 Units of measurement .52.3 Undated references .53 Glossary .5CONSTRUCTION4 Below-Grade Vaults .65 Tank Securement .76 Monitoring and Leak Detection .77 Ventilation 78 Normal
28、and Emergency Venting 79 Lifting and Handling Means 7PERFORMANCE10 Buoyancy Test 811 Hydrostatic Load Test 812 External Pressure Test .913 Permeability Test for Secondary Containment Vaults .914 Evaluation of Nonmetallic Gasket and Seal Materials .915 Strength of Lift Fittings Test 10MANUFACTURING A
29、ND PRODUCTION TESTS16 Visual Inspection .1017 Vault Thickness 1018 Compressive Strength .1019 Records .10MARKINGS20 General 1121 Marking Method and Location 11INSTALLATION INSTRUCTIONS22 General 11DECEMBER 28, 2006 BELOW-GRADE VAULTS FOR FLAMMABLE LIQUID STORAGE TANKS - UL 2245 3UL COPYRIGHTED MATER
30、IAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULINTRODUCTION1 Scope1.1 These requirements cover below-grade vaults intended for the storage of flammable or combustibleliquids in an aboveground atmospheric tank. Below-grade vaults are designed to contain oneaboveg
31、round tank which can be a compartment tank. Adjacent vaults may share a common wall. The lidof the vault may be at or below-grade.1.2 Below-grade vaults are constructed of a minimum of 6 inches (152.4 mm) of reinforced concrete orother equivalent noncombustible material and form a complete, liquid-t
32、ight enclosure that does not allowexternal ground water to permeate through the vault walls. Below-grade vaults can be evaluated assecondary containment vaults.1.3 Below-grade vaults covered by these requirements do not include an evaluation of components, suchas ventilation equipment, leak detectio
33、n and monitoring equipment, overfill protection equipment, andaccess ladders.1.4 Below-grade vaults are intended for installation and use in accordance with the manufacturersinstructions and the following fire codes: the Flammable and Combustible Liquids Code, NFPA 30, theAutomotive and Marine Servi
34、ce Station Code, NFPA 30A, and the Uniform Fire Code, Appendix II-J.1.5 Below-grade vaults covered by these requirements may be shipped in parts that require finalassembly in the field. When field assembly is required, detailed installation instructions shall be provided.1.6 These requirements do no
35、t cover seismic loading.1.7 A product that contains features, characteristics, components, materials, or systems new or differentfrom those covered by the requirements in this Standard, and that involves a risk of fire, electric shock, orinjury to persons shall be evaluated using the appropriate add
36、itional component and end-productrequirements to determine that the level of safety as originally anticipated by the intent of this Standard ismaintained. A product whose features, characteristics, components, materials, or systems conflict withspecific requirements or provisions of this Standard sh
37、all not be judged to comply with this Standard.Where appropriate, revision of requirements shall be proposed and adopted in conformance with themethods employed for development, revision, and implementation of this Standard.DECEMBER 28, 2006BELOW-GRADE VAULTS FOR FLAMMABLE LIQUID STORAGE TANKS - UL
38、22454UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM UL2 General2.1 Components2.1.1 Except as indicated in 2.1.2, a component of a product covered by this Standard shall comply withthe requirements for that component.2.1.2 A component need not c
39、omply with a specific requirement that:a) Involves a feature or characteristic not needed in the application of the component in theproduct covered by this Standard orb) Is superseded by a requirement in this Standard.2.1.3 A component shall be used in accordance with its recognized rating establish
40、ed for the intendedconditions of use.2.1.4 Specific components are recognized as being incomplete in construction features or restricted inperformance capabilities. Such components are intended for use only under limited conditions, such ascertain temperatures not exceeding specified limits, and sha
41、ll be used only under those specific conditionsfor which they have been recognized.2.2 Units of measurement2.2.1 When a value for measurement is followed by a value in other units in parentheses, the first statedvalue is the requirement.2.3 Undated references2.3.1 Any undated reference to a code or
42、standard appearing in the requirements of this standard shallbe interpreted as referring to the latest edition of that code or standard.3 Glossary3.1 For the purpose of this standard the following definitions apply.3.2 ABOVEGROUND TANK FOR FLAMMABLE LIQUIDS A tank complying with the requirements int
43、he Standard for Steel Aboveground Tanks for Flammable and Combustible Liquids, UL 142.3.3 ATMOSPHERIC TANK A storage tank that has been constructed to operate at pressures fromatmospheric through 1.0 psig (6.4 kPa) measured at the top of the tank.3.4 BELOW-GRADE VAULT A liquid-tight enclosure consis
44、ting of four walls, a floor, and a lid for thepurpose of containing a single flammable or combustible liquid aboveground atmospheric storage tank.A below-grade vault is not an occupancy and not intended to be occupied except for inspection, repair,or maintenance. The vault may be evaluated to provid
45、e secondary containment for the stored liquid.3.5 INTERSTITIAL SPACE The space between the primary tank and secondary containmentstructure that can be monitored for the presence of vapor or liquid.3.6 LIQUID-TIGHT Refers to an enclosure, in this case a vault, that does not allow external liquid,typi
46、cally water, to penetrate through to the enclosed area.DECEMBER 28, 2006 BELOW-GRADE VAULTS FOR FLAMMABLE LIQUID STORAGE TANKS - UL 2245 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM UL3.7 SECONDARY CONTAINMENT A structure that has permeabili
47、ty less than 1 107cm/sec (48grams m2/day) for the stored fluids, is external to and forms an interstitial space with the primary tank,and contains the entire contents of the primary tank in the event of a rupture.CONSTRUCTION4 Below-Grade Vaults4.1 A below-grade vault shall be constructed of a minim
48、um of 6 inches (152.4 mm) of reinforced concreteor other equivalent noncombustible material with the exception of joint seals, pipe and access-way seals,concrete linings, damp-proofing materials, and waterproofing materials. All materials that contact the tankcontents shall be compatible with the li
49、quids stored in the tanks.4.2 The vault shall be constructed to withstand anticipated loads including:a) Soil and hydrostatic loading on the floors, walls, and lid;b) Uplifting by groundwater or flooding; andc) Loads such as traffic and heavy equipment.The vault shall be constructed to withstand HS20-44 loading in accordance with the American Associationof State Highway and Transportation Officials, AASHTO, Standard for Highway Bridge Design. Vaultstructural drawings shall bear the stamp o
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1