UL 2775-2014 UL Standard for Safety Fixed Condensed Aerosol Extinguishing System Units (First Edition Reprint with revisions through and including October 19 2017)《固定浓缩气溶胶灭火系统单元的UL.pdf

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 2775 Fixed Condensed Aerosol Extinguishing System UnitsUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT A

2、UTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Fixed Condensed Aerosol Extinguishing System Units, UL 2775 First Edition, Dated April 3, 2014 Summary of Topics This First Edition of ANSI/UL 2775 includes a rst time ANSI approval. The requirem

3、ents are substantially in accordance with Proposal(s) on this subject dated February 7, 2014. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise withou

4、t prior permission of UL. UL provides this Standard as is without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or

5、 similar damages, including loss of prots, lost savings, loss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damag

6、e ever exceed the price paid for this Standard, regardless of the form of the claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys

7、 fees) resulting from any error or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer system. The requirements in this Standard are now in effect, except for those paragraphs, sections, tables, gures, and/or other elements of the Standard having future

8、effective dates as indicated in the note following the affected item. The prior text for requirements that have been revised and that have a future effective date are located after the Standard, and are preceded by a SUPERSEDED REQUIREMENTS notice. APRIL 3, 2014 UL 2775 tr1UL COPYRIGHTED MATERIAL NO

9、T AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL APRIL 3, 2014 UL 2775 tr2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL APRIL 3, 2014 1 UL 2775 Standard for Fixed Condensed Aerosol Extin

10、guishing System Units Prior to the rst edition, the requirements for the products covered by this standard were included in the Outline of Investigation for Fixed Condensed Aerosol Extinguishing System Units, UL 2775. First Edition April 3, 2014 This ANSI/UL Standard for Safety consists of the First

11、 Edition. The most recent designation of ANSI/UL 2775 as an American National Standard (ANSI) occurred on April 3, 2014. ANSI approval for a standard does not include the Cover Page, Transmittal Pages, Title Page, or effective date information. Comments or proposals for revisions on any part of the

12、Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at http:/. ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standard should be altered in any w

13、ay. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. COPYRIGHT 2014 UNDERWRITERS LABORATORIES INC. ANSI/UL 2775-2014UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PER

14、MISSION FROM UL APRIL 3, 2014 FIXED CONDENSED AEROSOL EXTINGUISHING SYSTEM UNITS - UL 2775 2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS INTRODUCTION 1 Scope .6 2 Components 6 3 Units of Measurement .7 4 Unda

15、ted References 7 5 Glossary .7 CONSTRUCTION 6 General 9 7 Electrically Operated Alarms 11 8 Controls and Indicators 11 9 Pneumatic Control Assembly Pressure Vessels 12 10 Pressure Relief Devices for Pneumatic Control Assemblies 16 11 Gaskets and O Rings 16 12 Pressure Gauges for Pneumatic Control As

16、semblies 16 13 Puncturing Mechanisms .18 14 Electrically Operated Devices 18 15 Condensed Aerosol Extinguishing Agents 18 16 Pneumatic Control Gases 18 17 Polymeric Materials and Nonmetallic Parts .18 18 Anti-Recoil Devices .19 19 Pressure Switches 19 PERFORMANCE 20 General 20 21 Discharge Test .20

17、22 Temperature Measurement Test 21 23 Mounting Device Test .21 24 Rough Usage Test .22 25 Vibration Test 22 26 Pyrotechnic Reaction Containment Test 23 27 Fire Exposure Test 24 28 High Humidity Test 24 29 Moist Hydrogen Sulde Air Mixture Corrosion Test 25 30 Moist Carbon Dioxide-Sulfur Dioxide Air M

18、ixture Corrosion Test 25 31 Salt Spray Corrosion Test .26 32 Thirty-Day Elevated Temperature Test 27 33 Temperature Cycling Test .28 34 One-Year Time Leakage Test 29 35 Hydrostatic Pressure Test .29 35.1 Pressure vessels .29 35.2 Other pressure retaining devices .30 35.3 Test method .31 36 Pressure

19、Relief Tests .31 37 Flexible Hose Assembly Low Temperature Test 32 38 Calibration Test Gauges .32 39 Burst Strength Test Gauges 32 APRIL 3, 2014 FIXED CONDENSED AEROSOL EXTINGUISHING SYSTEM UNITS - UL 2775 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMI

20、SSION FROM UL 40 Overpressure Test Gauges .33 41 Impulse Test Gauges 33 42 Pressure Relief Test Gauges .33 43 Water Resistance Test Gauges .34 44 Pneumatic Operation Test .34 45 Pneumatic Time Delay Verication Test .35 46 Pressure-Operated Alarm Test .35 47 Operation Test of Manual Actuators and Man

21、ual Pull Stations 36 48 500 Cycle Operation Test 36 48.1 Electrical initiators 36 48.2 Other devices 37 49 Class A and B Fire Extinguishment Tests 38 49.1 General test parameters 38 49.2 Class A re extinguishment tests .39 49.3 Class B re extinguishment tests .46 50 Distribution Verication Extinguis

22、hment Tests with Extinguishing System Units .47 50.1 General .47 50.2 Test enclosure .48 50.3 Maximum area coverage and minimum height test arrangement procedure 49 50.4 Maximum height test arrangement procedure 49 51 Distribution Verication Extinguishment Tests with Automatic Extinguisher Unit .50

23、51.1 General .50 51.2 Test enclosures 51 51.3 Maximum area coverage, minimum height, and maximum volume test arrangement procedure .52 51.4 Maximum height and maximum volume test arrangement procedure .52 52 Automatic Extinguisher Unit Automatic Operation Extinguishment Tests .53 52.1 General .53 52

24、.2 Test enclosures 54 52.3 Test arrangement procedure .54 53 Elastomeric Parts Test 55 54 Stress Corrosion Cracking Test for Brass Parts 55 55 Aging Test Condensed Aerosol Generator .56 56 Aging Tests Plastic Materials .58 56.1 Air-oven aging test .58 56.2 Light and water test 58 57 Nameplate Exposu

25、re Tests 59 58 Nameplate Adhesion Test .59 59 Nameplate Abrasion Test 60 60 Locking Device And Tamper Indicator Test 60 MANUFACTURING AND PRODUCTION TESTS 61 General 61 61.1 General .61 61.2 Aerosol-forming compound 61 61.3 Electrical initiators 61 61.4 Hydrostatic pressure test shells for pneumatic

26、 control assemblies 61 61.5 Gauge calibration test for pneumatic control assemblies 61 61.6 Leakage test for pneumatic control assemblies 62 APRIL 3, 2014 FIXED CONDENSED AEROSOL EXTINGUISHING SYSTEM UNITS - UL 2775 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WIT

27、HOUT PERMISSION FROM UL MARKINGS 62 General .62 INSTRUCTIONS 63 General 65 64 Owners Manual 65 65 Design, Installation, Operation, and Maintenance Instruction Manual 66 APRIL 3, 2014 FIXED CONDENSED AEROSOL EXTINGUISHING SYSTEM UNITS - UL 2775 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPR

28、ODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL INTRODUCTION 1 Scope 1.1 These requirements cover the construction and operation of xed condensed aerosol extinguishing system units inclusive of aerosol generating extinguishing system units and aerosol generating automatic extinguisher units inte

29、nded for total ooding applications when installed, inspected, tested, and maintained in accordance with the Standard for Fixed Aerosol Fire Extinguishing Systems, NFPA 2010. 1.2 Aerosol generating automatic extinguisher units do not have a manual means of operation, and are not intended: a) For use

30、as a general substitute for aerosol generating extinguishing system units; or b) For protection of re risks larger than those specied in the installation instructions for a single unit by using multiple units. 2 Components 2.1 Except as indicated in 2.2, a component of a product covered by this stan

31、dard shall comply with the requirements for that component. 2.2 A component is not required to comply with a specic requirement that: a) Involves a feature or characteristic not required in the application of the component in the product covered by this standard; or b) Is superseded by a requirement

32、 in this standard. 2.3 A component shall be used in accordance with its rating established for the intended conditions of use. 2.4 Specic components are incomplete in construction features or restricted in performance capabilities. Such components are intended for use only under limited conditions,

33、such as certain temperatures not exceeding specied limits, and shall be used only under those specic conditions. APRIL 3, 2014 FIXED CONDENSED AEROSOL EXTINGUISHING SYSTEM UNITS - UL 2775 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 3 Un

34、its of Measurement 3.1 The metric unit shall be designated as the official unit for purposes of this standard. Where values of measurement are specied in both SI and English units, either unit is used. In cases of dispute, the metric unit shall be used. 4 Undated References 4.1 Any undated reference

35、 to a code or standard appearing in the requirements of this standard shall be interpreted as referring to the latest edition of that code or standard. 5 Glossary 5.1 For the purpose of this standard, the following denitions apply. 5.2 ACTUATING MECHANISM A device whose automatic or manual operation

36、 results in the physical discharge of extinguishing agent. 5.3 AEROSOL EXTINGUISHING AGENT A re-extinguishing medium consisting of gaseous matter and nely divided solid particles generally having approximate diameters in the order of microns that is produced by a combustion process of an aerosol-for

37、ming compound. 5.4 AEROSOL EXTINGUISHING AGENT QUANTITY For re tests, the required mass of solid aerosol-forming compound to achieve the extinguishing application density (for extinguishing system units) or design application density (for automatic extinguisher units) within the protected volume and

38、 within the specied discharge time. 5.5 AEROSOL-FORMING COMPOUND A solid mixture of oxidant(s) and combustible component(s) included within a condensed aerosol generator that produces an aerosol extinguishing agent during combustion. 5.6 AUTOMATIC EXTINGUISHER UNIT A condensed aerosol generator with

39、 mounting bracket that: a) Has no manual method of actuation; b) Has an automatic thermal method of actuation; c) Is intended for use in normally unoccupied spaces; and d) Is limited to a single protected area as specied in 1.2. 5.7 CASING The external surface(s) of a condensed aerosol generator, ex

40、cluding the surface(s) containing the discharge port(s). 5.8 CONDENSED AEROSOL GENERATOR (AEROSOL GENERATOR) A normally non-pressurized device incorporating an aerosol-forming compound that, when pyrotechnically actuated, produces an aerosol extinguishing agent that ows through a cooling mechanism w

41、ithin the device prior to exiting through the discharge port(s). 5.9 COOLANT A heat-absorbing process or medium included within a condensed aerosol generator that effectively reduces the temperature of an aerosol extinguishing agent prior to exiting through the discharge port(s). APRIL 3, 2014 FIXED

42、 CONDENSED AEROSOL EXTINGUISHING SYSTEM UNITS - UL 2775 7UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 5.10 DESIGN APPLICATION DENSITY The minimum mass of a specic aerosol-forming compound per cubic meter of enclosure volume, including a s

43、afety factor, required for total ooding system design purposes. 5.11 DISCHARGE PORT The opening(s) on a condensed aerosol generator from which aerosol extinguishing agent exits providing uniform distribution: a) Over a specic area or b) Within a specic volume or c) Both. 5.12 DISCHARGE TIME The time

44、 interval between condensed aerosol generator activation and the end of aerosol extinguishing agent exiting from the discharge ports. 5.13 EXTINGUISHING APPLICATION DENSITY The minimum mass of a specic aerosol-forming compound per cubic meter of enclosure volume, excluding a safety factor, required

45、to extinguish re in total ooding applications involving a particular fuel under dened experimental conditions. 5.14 EXTINGUISHING SYSTEM UNIT One or more condensed aerosol generators with mounting brackets, actuation mechanisms, and other accessory equipment (as applicable) designed for automatic an

46、d manual actuation. 5.15 HEPTANE A commercial grade hydrocarbon used as a test fuel with the following characteristics: Minimum Initial boiling point 88C (190F) Maximum Dry point 100C (212F) Specic gravity (60F/60F) (15.6C/15.6C) 0.69 0.73 5.16 HOLD TIME For re tests, period of time during which an

47、extinguishing agent is required to maintain an even distribution throughout the protected volume in an amount sufficient to prevent re-ignition. 5.17 IGNITION DEVICE Device that initiates the pyrotechnic reaction of the solid aerosol-forming compound. 5.18 METHOD OF ACTUATION, AUTOMATIC A means of a

48、ctuation that results in extinguishing agent discharge without the necessity of human intervention, such as a thermal actuating mechanism. 5.19 METHOD OF ACTUATION, MANUAL A means of actuation that results in extinguishing agent discharge with the necessity of human intervention, either mechanically

49、, pneumatically or electrically. 5.20 MOUNTING BRACKET A device intended to attach a pneumatic control assembly or condensed aerosol generator of an extinguishing system unit or automatic extinguisher unit to the enclosure structure and maintains the intended discharge port orientation of condensed aerosol generators during discharge. 5.21 OPERATING PRESSURE The pressure in a fully charged pneumatic control assembly at 21C (70F).