UL 365-2018 UL Standard for Safety Police Station Connected Burglar Alarm Units and Systems (Fifth Edition).pdf

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 365 Police Station Connected Burglar Alarm Units and Systems STANDARD FOR SAFETYUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL C

2、OPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Police Station Connected Burglar Alarm Units and Systems, UL 365 Fifth Edition, Dated January 31, 2018 Summary of Topics The Fifth Edition of the Standard for Police Stat

3、ion Connected Burglar Alarm Units and Systems, UL 365, was issued to expand media to include website. The revised requirements are substantially in accordance with Proposal(s) on this subject dated October 23, 2015. All rights reserved. No part of this publication may be reproduced, stored in a retr

4、ieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL provides this Standard as is without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merch

5、antability or tness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of prots, lost savings, loss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an auth

6、orized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and

7、hold UL harmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer system. JANUARY 31, 2018 UL 365 tr1UL COPYRIG

8、HTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL JANUARY 31, 2018 UL 365 tr2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL JANUARY 31, 2018 1 UL 365 Standard for Police St

9、ation Connected Burglar Alarm Units and Systems First Edition March, 1975 Second Edition July, 1982 Third Edition June, 1993 Fourth Edition July, 1997 Fifth Edition January 31, 2018 This ANSI/UL Standard for Safety consists of the Fifth Edition. The most recent designation of ANSI/UL 365 as an Ameri

10、can National Standard (ANSI) occurred on January 31, 2018. ANSI approval for a standard does not include the Cover Page, Transmittal Pages, and Title Page. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal

11、 Request in ULs On-Line Collaborative Standards Development System (CSDS) at https:/. ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standard should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Stan

12、dards shall remain the sole and exclusive property of UL. COPYRIGHT 2018 UNDERWRITERS LABORATORIES INC. ANSI/UL 365-2018UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL JANUARY 31, 2018 POLICE STATION CONNECTED BURGLAR ALARM UNITS AND SYSTEMS

13、 - UL 365 2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS INTRODUCTION 1 Scope .9 2 Terminology .10 3 Components 10 4 Units of Measurement 10 5 Undated References .10 6 Glossary 11 7 Installation and Operating

14、Instructions 13 8 Installation and Operating Instructions Physical Media14 CONSTRUCTION ASSEMBLY 9 General.15 9.1 Product assembly .15 9.2 Electrical protection 15 10 Protection of Service Personnel 20 11 Enclosures .20 11.1 General .20 11.2 Doors and covers 22 11.3 Enclosure openings 22 11.4 Screen

15、s and expanded metal 24 11.5 Cast metal.24 11.6 Sheet metal .25 11.7 Product enclosure mounting .28 11.8 Polymeric materials.28 12 Electric Shock 29 13 Corrosion Protection 29 FIELD WIRING CONNECTIONS 14 General30 15 Cord-Connected Products .30 16 Permanently-Connected Products.31 16.1 General .31 1

16、6.2 Field-wiring terminals .32 16.3 Field wiring leads.34 16.4 Polarity identication 35 17 Grounding .35 INTERNAL WIRING 18 General36 19 Wiring Methods.37 20 Separation of Circuits .38 21 Bonding for Grounding 38 JANUARY 31, 2018 POLICE STATION CONNECTED BURGLAR ALARM UNITS AND SYSTEMS - UL 365 3UL

17、COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL COMPONENTS, ELECTRICAL 22 General41 22.1 Mounting of components 41 22.2 Insulating materials .42 22.3 Fuseholders .43 22.4 Current-carrying parts.43 22.5 Power-on indicator .43 23 Overcurrent Prot

18、ection 44 24 Semiconductors 44 25 Switches.44 26 Transformers and Coils44 SPACINGS 27 General44 28 Components .47 PERFORMANCE ALL UNITS 29 General47 29.1 Test units and data .47 29.2 Test samples and miscellaneous data 48 29.3 Test voltages 48 29.4 FCC requirements 48 30 Normal Operation Test 48 31

19、Current Protection Test 49 32 Input Test49 33 Output Measurement Test .49 34 Electrical Supervision Test .50 35 Undervoltage Operation Test .51 36 Overvoltage Operation Test 51 37 Variable Ambient Test .51 38 Humidity Test 52 39 Leakage Current Tests for Cord-Connected Products .52 40 Electric Shock

20、 Current Test 55 41 Overload Test 59 41.1 General .59 41.2 Separately energized circuits 60 42 Endurance Test 60 42.1 General .60 42.2 Separately energized circuits 60 43 Jarring Test 60 44 Dielectric Voltage-Withstand Test .61 45 Temperature Test.62 46 Abnormal Operation Test 66 47 Electrical Trans

21、ient Tests 66 47.1 General .66 47.2 Supply line transients .66 47.3 Internally induced transients .69 47.4 Input/output circuit transients 69 48 AC Induction Test.70 49 Polymeric Materials Test.71 JANUARY 31, 2018 POLICE STATION CONNECTED BURGLAR ALARM UNITS AND SYSTEMS - UL 365 4UL COPYRIGHTED MATE

22、RIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 50 Battery Replacement Test .71 51 Drop Test 72 52 Strain Relief Test .72 52.1 Supply cord .72 52.2 Field-wiring leads.72 53 Ignition Through Bottom-Panel Openings Test73 53.1 General .73 53.2 Hot, aming oil .73

23、53.3 Molten PVC and copper.74 54 Mechanical Strength Tests for Enclosures .74 55 Special Terminal Assemblies Tests .75 55.1 General .75 55.2 Disconnection and reconnection .75 55.3 Flexing test 75 55.4 Millivolt drop test .76 55.5 Temperature test .76 POLICE STATION RECEIVING AND TRANSMITTING UNITS

24、56 General76 57 Common Requirements .77 58 Direct-Connected Units 77 59 Transmitter-Connected Units .77 60 Other Methods of Alarm Transmission.79 61 Standard Line Security Equipment 79 62 Encrypted Line Security Equipment .81 PROTECTED PREMISES EQUIPMENT 63 Subscribers Control Units .81 64 Outside A

25、larm Devices 82 65 Intrusion Detection 82 MERCANTILE PREMISES ALARM SYSTEMS GENERAL 66 Construction .82 67 Circuit and Operation83 68 Maintenance .84 69 Attack Tests86 69.1 General .86 69.2 Test method .86 70 Attack Resistance Time .87 71 Tamper Protection 88 72 Alarm Sounding Devices.89 LINE SECURI

26、TY 73 General90 JANUARY 31, 2018 POLICE STATION CONNECTED BURGLAR ALARM UNITS AND SYSTEMS - UL 365 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL MERCANTILE SAFE AND VAULT ALARM SYSTEMS DETAILS 74 General90 75 Circuit and Operation90 BANK

27、SAFE AND VAULT ALARM SYSTEMS POLICE STATION CONNECTED BANK SAFE AND VAULT BURGLAR ALARM UNITS 76 General91 77 Circuit and Operation91 78 Maintenance .93 79 Attack Test.94 ALARM SYSTEMS FOR BANK SAFES AND VAULTS 80 General94 81 Tamper Protection 95 82 Alarm Sounding Devices.95 83 Circuit and Operatio

28、n95 LINE SECURITY EQUIPMENT 84 General96 POWER SUPPLIES DETAILS 85 General96 RECHARGEABLE (SECONDARY) BATTERIES 86 General97 NONCHARGEABLE (PRIMARY) BATTERIES 87 General98 PERFORMANCE 88 Power Failure Test99 89 Power Supply Located at Police Station 100 SHORT RANGE RADIO FREQUENCY (RF) DEVICES 90 Ge

29、neral 101 91 Time to Report Alarm 102 92 Inoperative Transmitter Reporting102 93 Battery Status Indication102 94 Tamper Protection .103 JANUARY 31, 2018 POLICE STATION CONNECTED BURGLAR ALARM UNITS AND SYSTEMS - UL 365 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION

30、WITHOUT PERMISSION FROM UL 95 Protection From Interference 103 96 Reference Level Determination 103 96.1 General 103 96.2 Method 1.104 96.3 Method 2.106 97 Interference Immunity 109 98 Frequency Selectivity 110 99 Clash 111 100 Clash Error 112 101 Error (Falsing) Rate.112 102 Throughput Rate .114 10

31、3 Transmitter Stability Test 115 104 Transmitter Accelerated Aging Test .115 105 Installation Instructions and User Manual 115 MANUFACTURING AND PRODUCTION LINE TESTS FOR HIGH-VOLTAGE PRODUCTS 106 General .116 107 Production Line Dielectric Voltage-Withstand Test 116 108 Production Line Grounding Co

32、ntinuity Test 117 MARKING 109 General .117 110 Marking Permanency Tests 120 OUTDOOR USE EQUIPMENT ASSEMBLY 111 General .120 112 Construction .120 112.1 General .120 112.2 Corrosion protection 121 113 Field-Wiring Connections 123 114 Internal Wiring .123 115 Components, Electrical Insulating Material

33、 .124 PERFORMANCE 116 Rain Test 124 117 Dust Test 128 118 Variable Ambient Test.128 119 Metallic Coating Thickness Test 128 120 Corrosion Tests 130 120.1 General .130 120.2 Salt spray (fog) 130 120.3 Moist hydrogen sulde (H 2 S) air mixture 131 120.4 Moist carbon dioxide (CO 2 ) sulphur dioxide (SO

34、2 ) air mixture 131 121 Ultraviolet Light and Water Exposure Test .131 122 Accelerated Aging Tests for Gaskets, Sealing Compounds, and Adhesives 132 JANUARY 31, 2018 POLICE STATION CONNECTED BURGLAR ALARM UNITS AND SYSTEMS - UL 365 7UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR

35、DISTRIBUTION WITHOUT PERMISSION FROM UL MARKING 123 General .133 ACCESSORY EQUIPMENT 124 General .134 125 Construction .134 126 Performance (Installation) Test .135 127 Markings 135 Appendix A Standards for ComponentsA1 JANUARY 31, 2018 POLICE STATION CONNECTED BURGLAR ALARM UNITS AND SYSTEMS - UL 3

36、65 8UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL INTRODUCTION 1 Scope 1.1 These requirements cover construction, performance, and maintenance of police station connected burglar-alarm units and systems for use in mercantile premises, merc

37、antile safes and vaults, and bank safes and vaults. 1.2 As covered by these requirements, a police station connected alarm system consists of protective circuits and devices, connected through control apparatus to a sounding device mounted on an outside or inside wall of the building in which the pr

38、otected property is situated, and a constantly-manned police department (see 1.8 and 56.1). Intrusion into or disturbance of the units or wiring causes the sounding device to be actuated and a signal to be transmitted to the police department. The sounding device and signal to the police department

39、continue to operate until it is stopped by using the proper control key, by exhaustion of the power supply, or by action of an automatic timing element that is preset for a denite operating period. These systems usually operate within the limits of Class 2 remote control and signal circuits as dened

40、 by Article 725 of the National Electrical Code, NFPA 70. 1.3 The operation of a police station connected alarm system is partially under the control and domination of the owner or others interested in the property. However, it is required that police station connected systems be maintained under th

41、e care and regular inspection service of the installing company. The installing company is expected to respond promptly to troubles or calls for service on report of the owner or police department. See Mercantile Premises Alarm Systems, Maintenance, Section 68 and Bank Safe and Vault Alarm Systems,

42、Maintenance, Section 78. It is the responsibility of the owner to switch the system on and off duty and to report malfunctioning of the system to the service company. 1.4 Police station connected mercantile burglar-alarm systems transmission means may be designated as standard line security or encry

43、pted line security and are designated as to their acceptability for use either on mercantile premises or on mercantile safes and vaults. See Standard Line Security Equipment, Section 61, and Encrypted Line Security Equipment, Section 62. 1.5 Police station connected bank burglar-alarm systems transm

44、ission means may be designated as standard line security or encrypted line security and are for use on bank safes and vaults. See Standard Line Security Equipment, Section 61, and Encrypted Line Security Equipment, Section 62. 1.6 Equipment intended for combination burglar-alarm and re-protective si

45、gnaling systems is also expected to comply, with the Standard for Control Units and Accessories for Fire Alarm Systems, UL 864. 1.7 Devices installed on individual properties are further classied as to extent of protection at each location. Rules covering installation and classication (of extent) of

46、 alarm equipment at individual locations are published in the Standard for Installation and Classication of Burglar and Holdup Alarm Systems, UL 681, which should be consulted by burglar-alarm installers. 1.8 The connection to a police department may be: a) Direct or b) Through a central station or

47、a residential monitoring station complying with the Standard for Central-Station Alarm Services, UL 827. JANUARY 31, 2018 POLICE STATION CONNECTED BURGLAR ALARM UNITS AND SYSTEMS - UL 365 9UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 2 Te

48、rminology 2.1 The term product as used in this standard refers to all types of police station connected burglar alarm units and systems. 3 Components 3.1 Except as indicated in 3.2, a component of a product covered by this standard shall comply with the requirements for that component. See Appendix

49、A for a list of standards covering components used in the products covered by this standard. 3.2 A component is not required to comply with a specic requirement that: a) Involves a feature or characteristic not required in the application of the component in the product covered by this standard, or b) Is superseded by a requirement in this standard. 3.3 A component shall be used in accordance with its rating established for the intended conditions of use. 3.4 Specic components are incomplete in construction