1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 44 Thermoset-Insulated Wires and CablesUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FU
2、RTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Thermoset-Insulated Wires and Cables, UL 44 Eighteenth Edition, Dated March 28, 2014 Summary of Topics This revision of ANSI/UL 44 is to align editorial changes with the CSA revision issued December 2014. The te
3、chnical requirements in the standards are the same. Text that has been changed in any manner or impacted by ULs electronic publishing system is marked with a vertical line in the margin. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted
4、in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL provides this Standard as is without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or tness for any p
5、urpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of prots, lost savings, loss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has
6、been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and aga
7、inst any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer system. The requirements in this Standard are now in effect, except for th
8、ose paragraphs, sections, tables, gures, and/or other elements of the Standard having future effective dates as indicated in the preface. The prior text for requirements that have been revised and that have a future effective date are located after the Standard, and are preceded by a SUPERSEDED REQU
9、IREMENTS notice. FEBRUARY 9, 2015 UL 44 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL FEBRUARY 9, 2015 UL 44 tr2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM
10、 UL Association of Standardization and Certication NMX-J-451-ANCE-2014 Fifth Edition CSA Group CSA C22.2 No. 38-14 Tenth Edition Underwriters Laboratories Inc. UL 44 Eighteenth Edition Thermoset-Insulated Wires and Cables MARCH 28, 2014 (Title Page Reprinted: February 9, 2015) ANSI/UL 44-2014UL COPY
11、RIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Commitment for Amendments This standard is issued jointly by the Association of Standardization and Certication (ANCE), the Canadian Standards Association (operating as “CSA Group”), and Underwriters
12、Laboratories Inc. (UL). Comments or proposals for revisions on any part of the standard may be submitted to ANCE, CSA Group, or UL at anytime. Revisions to this standard will be made only after processing according to the standards development procedures of ANCE, CSA Group, and UL. CSA Group and UL
13、will issue revisions to this standard by means of a new edition or revised or additional pages bearing their date of issue. ANCE will incorporate the same revisions into a new edition of the standard bearing the same date of issue as the CSA Group and UL pages. Copyright 2015 ANCE Rights reserved in
14、 favor of ANCE. ISBN 978-1-55491-984-0 2015 CSA Group All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher. This Standard is subject to review ve years from the date of publication, and suggestions for its improvement
15、 will be referred to the appropriate committee. To submit a proposal for change, please send the following information to inquirescsagroup.org and include Proposal for change in the subject line: Standard designation (number); relevant clause, table, and/or gure number; wording of the proposed chang
16、e; and rationale for the change. To purchase CSA Group Standards and related publications, visit CSA Groups Online Store at shop.csa.ca or call toll-free 1-800-463-6727 or 416-747-4044. Copyright 2015 Underwriters Laboratories Inc. ULs Standards for Safety are copyrighted by UL. Neither a printed no
17、r electronic copy of a Standard should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. This ANSI/UL Standard for Safety consists of the Eighteenth Edition including revisions through
18、March 28, 2014. The most recent designation of ANSI/UL 44 as an American National Standard (ANSI) occurred on March 26, 2014. ANSI approval for a standard does not include the Cover Page, Transmittal Pages, Title Page (front and back), or the Preface. The National Difference Page and IEC Foreword ar
19、e also excluded from the ANSI approval of IEC-based standards. The Department of Defense (DoD) has adopted UL 44 on April 5, 1985. The publication of revised pages or a new edition of this Standard will not invalidate the DoD adoption. Comments or proposals for revisions on any part of the Standard
20、may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at http:/. To purchase UL Standards, visit Comm 2000 at http:/m- or call toll-free 1-888-853-3503.UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTH
21、ER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS PREFACE 6 1 Scope .8 2 General 8 2.1 Units of measure .8 2.2 Reference publications 8 3 Denitions 12 4 Construction .13 4.1 Conductors .13 4.2 Insulation .17 4.3 Jackets or brous coverings over single conductors .18 4.4 Shielding (o
22、ptional) 19 4.5 Multiple-conductor cables .19 4.6 Color coding 20 4.7 Fillers and protective materials 21 4.8 Jacket separators .21 4.9 Jackets 22 4.10 Evaluation of new materials Establishment of dry temperature rating of alternative insulation and jacketing materials for use in this standard .22 4
23、.11 Assemblies that include single-conductor thermoset-insulated wires 23 5 Test requirements 23 5.1 General 23 5.2 Conductor resistance 23 5.3 Tests of aluminum conductors 24 5.4 Long-term insulation resistance in water 24 5.5 Long-term insulation resistance in air for 90C rated conductors 25 5.6 C
24、apacitance and relative permittivity .26 5.7 Conductor corrosion .26 5.8 Insulation fall-in .26 5.9 Heat shock of thermoplastic jacket 26 5.10 Flexibility of separator under a thermoplastic jacket .27 5.11 Cold bend and cold impact 27 5.12 Deformation .27 5.13 Hot-creep elongation and hot-creep set
25、.28 5.14 Flame and smoke 28 5.15 Weather (sunlight) resistance (optional) .31 5.16 Oil resistance (optional) .32 5.17 Gasoline and oil resistance (optional) .32 5.18 Crushing resistance 32 5.19 Dielectric breakdown after glancing impact 33 5.20 Durability of ink printing .33 5.21 Shrinkback 33 5.22
26、Evaluation of new materials establishment of temperature rating .33 5.23 A-C spark test .34 5.24 Dielectric voltage-withstand in water 34 5.25 Insulation resistance in water at 15C .34 5.26 Electrical continuity .35 6 Marking .35 6.1 Marking on product 35 6.2 Marking on package .38 MARCH 28, 2014 NM
27、X-J-451-ANCE-2014 CSA C22.2 NO. 38-14 UL 44 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 7 Deep-well submersible water-pump cable .39 7.1 General 39 7.2 Construction 39 7.3 Markings .41 7.4 Tests 43 44 Annex A (informative) Conductor typ
28、es covered by this Standard (See Clause 1.1) Annex B (informative) Summary of requirements (See Clause 1.1) Annex C (normative) Chemical composition of aluminum conductors (See Clause 4.1.2.1) Annex D (normative) Copper-clad aluminum conductors (See Clause 4.1.3) D.1 General .85 D.2 Sizes and strand
29、ing 85 D.3 Conductor resistance .85 D.4 Physical properties .85 D.5 Marking requirements 85 Annex E (informative) Metric sizes (See Clause 4.1.5.1) Annex F (normative) Protective coverings other than jackets (See Clauses 4.3.1 and 4.9.1.1) F.1 General .89 F.2 Tapes 89 F.3 Cotton braids 89 F.3.1 Gene
30、ral 89 F.3.2 Coverage .90 F.4 All-glass and glass/cotton braids .93 F.4.5 Glass content .93 F.5 Cotton wraps and servings 94 F.5.1 General 94 F.5.2 Coverage .95 F.6 Glass wraps .96 F.7 Braids and wraps 96 F.8 Saturation of brous coverings other than tapes .96 F.9 Finish .98 FEBRUARY 9, 2015 NMX-J-45
31、1-ANCE-2014 CSA C22.2 NO. 38-14 UL 44 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Annex G (normative for Canada) Color identication of circuit conductors (See Clauses 4.6.2.2 and 7.2.5.1) Annex H (normative) Formulas for calculating ins
32、ulation resistance of types having parameters other than as specied in this Standard (See Clause 5.4.1.2) Annex I (normative) Alternative national markings (See Clauses 6.1.1.3 and 7.3.1.3) Annex J (normative) Requirements for Types RW75, R90, and RW90 rated 5000 V (See Table 1 and Annex B) J.1 Gene
33、ral 107 J.2 Construction 107 J.2.1 Conductors 107 J.2.2 Conductor shielding .107 J.2.3 Insulation 107 J.2.4 Jackets 107 J.3 Tests 107 J.3.1 Long-term insulation resistance in water .107 J.3.2 Insulation resistance in air for Type R90, rated 5000 V 108 J.3.3 Dielectric voltage-withstand in water 108
34、J.3.4 Insulation resistance in water at 15C .108 J.3.5 Resistivity of extruded semiconducting shielding 108 MARCH 28, 2014 NMX-J-451-ANCE-2014 CSA C22.2 NO. 38-14 UL 44 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL PREFACE This is the har
35、monized ANCE, CSA Group, and UL standard for Thermoset-Insulated Wires and Cables. It is the Fifth edition of NMX-J-451-ANCE, the Tenth edition of CSA C22.2 No. 38, and the Eighteenth edition of UL 44. This edition of NMX-J-451-ANCE supersedes the previous edition published in 2010. This edition of
36、CSA C22.2 No. 38 supersedes the previous edition published in 2010. This edition of UL 44 supersedes the previous edition published in 2010. This harmonized standard was prepared by the Association of Standardization and Certication, (ANCE), CSA Group and Underwriters Laboratories Inc. (UL). The eff
37、orts and support of the Technical Harmonization Committee for Electrical Wires and Cables, of the Council on the Harmonization of Electrotechnical Standards of the Nations of the Americas (CANENA), are gratefully acknowledged. This Standard is considered suitable for use for conformity assessment wi
38、thin the stated scope of the Standard. The present Mexican Standard was developed by the CT 20 Conductores from the Comite de Normalizacion de la Asociacion de Normalizacion y Certicacion, A.C., CONANCE, with the collaboration of the SC 20B Conductores para Baja Tensin. This standard was reviewed by
39、 the CSA Integrated Committee on Fixed Installation Wires and Cables, under the jurisdiction of the CSA Technical Committee on Wiring Products and the CSA Strategic Steering Committee on Requirements for Electrical Safety, and has been formally approved by the CSA Technical Committee. This standard
40、has been approved by the American National Standards Institute (ANSI) as an American National Standard. Application of Standard Where reference is made to a specic number of samples to be tested, the specied number is to be considered a minimum quantity. Note: Although the intended primary applicati
41、on of this standard is stated in its scope, it is important to note that it remains the responsibility of the users of the standard to judge its suitability for their particular purpose. Level of Harmonization This standard uses the IEC format but is not based on, nor is it considered equivalent to,
42、 an IEC standard. This standard provides requirements for insulated wires and cables for use in accordance with the electrical installation codes of Canada, Mexico, and the United States. At present there is no IEC standard for wires and cables for use in accordance with these codes. Therefore, this
43、 standard does not employ any IEC standard for base requirements. This standard is published as an equivalent standard for ANCE, CSA Group, and UL. An equivalent standard is a standard that is substantially the same in technical content, except as follows: Technical national differences are allowed
44、for codes and governmental regulations as well as those recognized as being in accordance with NAFTA Article 905, for example, because of fundamental climatic, geographical, technological, or infrastructural factors, scientic justication, or the level of protection that the country considers appropr
45、iate. Presentation is word for word except for editorial changes. MARCH 28, 2014 NMX-J-451-ANCE-2014 CSA C22.2 NO. 38-14 UL 44 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Interpretations The interpretation by the standards development o
46、rganization of an identical or equivalent standard is based on the literal text to determine compliance with the standard in accordance with the procedural rules of the standards development organization. If more than one interpretation of the literal text has been identied, a revision is to be prop
47、osed as soon as possible to each of the standards development organizations to more accurately reect the intent. ANCE Effective Date The effective date for ANCE will be announced through the Diario Ocial de la Federacin (Official Gazette) and is indicated on the cover page. CSA Group Effective Date
48、The effective date for CSA Group will be announced through a CSA Informs or CSA Group Certication Notice. UL Effective Date As of March 28, 2014 all products Listed or Recognized by UL must comply with the requirements in this standard. A UL effective date is one established by Underwriters Laborato
49、ries Inc. and is not part of the ANSI approved standard. MARCH 28, 2014 NMX-J-451-ANCE-2014 CSA C22.2 NO. 38-14 UL 44 7UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Thermoset-Insulated Wires and Cables 1 Scope 1.1 This Standard species the requirements for single-conductor and multiple-conductor thermoset-insulated wires and cables rated 600 V, 1000 V, 2000 V,
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1