UL 486A-486B-2013 UL Standard for Safety Wire Connectors (Second Edition Reprint with revisions through and including January 20 2016)《接线器》.pdf

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 486A-486B Wire ConnectorsUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUC

2、TION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Wire Connectors, UL 486A-486B Second Edition, Dated January 11, 2013 Summary of Topics This revision of ANSI/UL 486A486B is being issued to update the UL effective date information. No changes in requirements are involved. As

3、 noted in the Commitment for Amendments statement located on the back side of the title page, UL, CSA, and ANCE are committed to updating this harmonized standard jointly. However, the revision pages dated February 28, 2014 will not be jointly issued by UL, CSA, and ANCE as these revision pages only

4、 address UL effective date information. Text that has been changed in any manner or impacted by ULs electronic publishing system is marked with a vertical line in the margin. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form

5、by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL provides this Standard as is without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or tness for any purpose. In n

6、o event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of prots, lost savings, loss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised

7、 of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any los

8、s, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer system. The requirements in this Standard are now in effect, except for those paragrap

9、hs, sections, tables, gures, and/or other elements of the Standard having future effective dates as indicated in the preface. The prior text for requirements that have been revised and that have a future effective date are located after the Standard, and are preceded by a SUPERSEDED REQUIREMENTS not

10、ice. FEBRUARY 28, 2014 UL 486A-486B tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL FEBRUARY 28, 2014 UL 486A-486B tr2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION

11、FROM UL Association of Standardization and Certication NMX-J-543-ANCE Third Edition Canadian Standards Association CSA-C22.2 No. 65-13 Fifth Edition Underwriters Laboratories Inc. UL 486A-486B Second Edition Wire Connectors January 11, 2013 (Title Page Reprinted: February 28, 2014) ANSI/UL 486A-486B

12、-2013UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Commitment for Amendments This standard is issued jointly by the Association of Standardization and Certication (ANCE), the Canadian Standards Association (operating as “CSA Group”), and U

13、nderwriters Laboratories Inc. (UL). Comments or proposals for revisions on any part of the standard may be submitted to ANCE, CSA Group, or UL at any time. Revisions to this standard will be made only after processing according to the standards development procedures of ANCE, CSA Group, and UL. CSA

14、Group and UL will issue revisions to this standard by means of a new edition or revised or additional pages bearing their date of issue. ANCE will incorporate the same revisions into a new edition of the standard bearing the same date of issue as the CSA Group and UL pages. Copyright 2013 ANCE Right

15、s reserved in favor of ANCE. ISBN 978-1-55491-867-6 2013 CSA Group All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher. This Standard is subject to periodic review, and suggestions for its improvement will be referre

16、d to the appropriate committee. To submit a proposal for change, please send the following information to inquirescsagroup.org and include Proposal for change in the subject line: Standard designation (number); relevant clause, table, and/or gure number; wording of the proposed change; and rationale

17、 for the change. To purchase CSA Group Standards and related publications, visit CSA Groups Online Store at shop.csa.ca or call toll-free 1-800-463-6727 or 416-747-4044. Copyright 2014 Underwriters Laboratories Inc. ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic cop

18、y of a Standard should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. This ANSI/UL Standard for Safety consists of the Second Edition including revisions through February 28, 2014. T

19、he most recent designation of ANSI/UL 486A-486B as an American National Standard (ANSI) occurred on December 13, 2013. ANSI approval for a standard does not include the Cover Page, Transmittal Pages, Title Page (front and back), or the Preface. Comments or proposals for revisions on any part of the

20、Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at http:/. To purchase UL Standards, visit Comm 2000 at http:/m- or call toll-free 1-888-853-3503.UL COPYRIGHTED MATERIAL NOT AUTHORIZED

21、FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS Preface .5 1 Scope .7 2 Reference Publications 9 2.1 Normative references .9 2.2 Informative references .10 3 Units of Measurement 10 4 Denitions 10 5 Symbols and Abbreviations .11 6 Construction Requirements .12 6.1 Genera

22、l 12 6.2 Materials .13 6.3 Soldering lugs .14 7 Test Requirements .14 7.1 General 14 7.2 Current-cycling 15 7.3 Static-heating sequence 16 7.4 Mechanical sequence 16 7.5 Dielectric-withstand test sequence .17 7.6 Secureness of insulation .17 7.7 Drop .17 7.8 Dielectric withstand after drop .17 7.9 F

23、lexing .17 7.10 Low temperature installation .18 7.11 Moisture absorption 18 7.12 Stress corrosion/moist ammonia (NH 4 )18 7.13 Stress corrosion/mercurous nitrate (HgNO 3 ) .18 8 Sampling Requirements 18 8.1 General 18 8.2 Current-cycling 20 8.3 Static-heating sequence 21 8.4 Mechanical sequence 22

24、8.5 Dielectric withstand 22 8.6 Secureness of insulation .22 8.7 Drop .22 8.8 Dielectric withstand after drop .22 8.9 Flexing .23 8.10 Low temperature installation .23 8.11 Moisture absorption .23 8.12 Stress corrosion/moist ammonia (NH 4 )23 8.13 Stress corrosion/mercurous nitrate (HgNO 3 ) .23 9 T

25、est Methods 23 9.1 General 23 9.2 Current-cycling 31 9.3 Static-heating sequence 32 9.4 Mechanical sequence 34 9.5 Dielectric withstand 34 9.6 Secureness of insulation .36 9.7 Drop .37 9.8 Dielectric voltage-withstand after drop 37 JANUARY 11, 2013 NMX-J-543-ANCE CSA-C22.2 NO. 65-13 UL 486A-486B 3UL

26、 COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 9.9 Flexing .37 9.10 Low temperature installation .38 9.11 Moisture absorption .38 9.12 Stress corrosion/moist ammonia (NH 4 )38 9.13 Stress corrosion/mercurous nitrate (HgNO 3 ) .38 10 Marking,

27、Labeling, and Packaging 38 Tables 45 Figures .61 ANNEX A Informative References ANNEX B Flammability Test (Material V-2 and VTM-2) B.1 General 69 B.2 Reference Publications 69 B.3 Apparatus 70 B.4 Test Specimens .70 B.5 Specimen Conditioning 71 B.6 Test Method 71 B.7 Results 72 ANNEX C Examples C.1

28、Examples from Clause 7.1.4 73 C.2 Example from Clause 8.3.2 (ampere-rated, non-parallel) .73 C.3 Example from Clause 8.3.3 (ampere-rated, both parallel and non-parallel) .74 ANNEX D Stability Factor Calculation ANNEX E Marking Locations Guide JANUARY 11, 2013 NMX-J-543-ANCE CSA-C22.2 NO. 65-13 UL 48

29、6A-486B 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Preface This is the harmonized ANCE, CSA Group, and UL standard for Wire Connectors. It is the third edition of NMX-J-543-ANCE, the fth edition of CSA C22.2 No. 65, and the second edit

30、ion of UL 486A-486B. This edition of NMX-J-543-ANCE cancels the previous edition published in 2008. This edition of CSA C22.2 No. 65 supersedes the previous edition published in 2003. This edition of UL 486A-486B supersedes the previous edition published in 2003. This harmonized standard was prepare

31、d by the Association of Standardization and Certication (ANCE), the CSA Group, and Underwriters Laboratories Inc. (UL). The efforts and support of the Technical Harmonization Committee for Connectors, of the Council on the Harmonization of Electrotechnical Standards of the Nations of the Americas (C

32、ANENA), are gratefully acknowledged. This Standard is considered suitable for use for conformity assessment within the stated scope of the Standard. This standard was reviewed by the CSA Subcommittee on Wiring Devices for Household and General Use, under the jurisdiction of the CSA Technical Committ

33、ee on Wiring Products and the CSA Strategic Steering Committee on Requirements for Electrical Safety, and has been formally approved by the CSA Technical Committee. This standard has been approved by the American National Standards Institute (ANSI) as an American National Standard. Where reference i

34、s made to a specic number of samples to be tested, the specied number is to be considered a minimum quantity. Note: Although the intended primary application of this standard is stated in its scope, it is important to note that it remains the responsibility of the users of the standard to judge its

35、suitability for their particular purpose. Level of harmonization This standard uses the IEC format but is not based on, nor is it considered equivalent to, an IEC standard. This standard is published as an equivalent standard for ANCE, CSA Group, and UL. An equivalent standard is a standard that is

36、substantially the same in technical content, except as follows: Technical national differences are allowed for codes and governmental regulations as well as those recognized as being in accordance with NAFTA Article 905, for example, because of fundamental climatic, geographical, technological, or i

37、nfrastructural factors, scientic justication, or the level of protection that the country considers appropriate. Presentation is word for word except for editorial changes. Reasons for differences from IEC The Technical Harmonization Committee identied several IEC standards that address electrical w

38、ire connectors included in the scope of this standard. The IEC standards for electrical wire connectors are recognized as being generally system specic, containing the requirements for the relevant wire connectors and cables in many discrete IEC standards. JANUARY 11, 2013 NMX-J-543-ANCE CSA-C22.2 N

39、O. 65-13 UL 486A-486B 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL The THC determined the safe use of electrical wire connectors is dependent on the design and performance of the wire connectors in relation to the North American Electric

40、al Codes with which they are intended to be installed. The THC agreed such future investigation will be facilitated by the harmonization of the North American Electrical Codes for wire connectors with IEC installation practices. Interpretations The interpretation by the standards development organiz

41、ation of an identical or equivalent standard is based on the literal text to determine compliance with the standard in accordance with the procedural rules of the standards development organization. If more than one interpretation of the literal text has been identied, a revision is to be proposed a

42、s soon as possible to each of the standards development organizations to more accurately reect the intent. ANCE effective date The effective date for ANCE will be announced through the Diario Ocial de la Federacin (Official Gazette) and is indicated on the cover page. CSA Group effective date The ef

43、fective date for CSA Group will be announced through CSA Informs or a CSA Group certication notice. UL effective date As of February 28, 2014, all products Listed or Recognized by UL must comply with the requirements in this standard. A UL effective date is one established by Underwriters Laboratori

44、es Inc. and is not part of the ANSI approved standard. FEBRUARY 28, 2014 NMX-J-543-ANCE CSA-C22.2 NO. 65-13 UL 486A-486B 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 1 Scope 1.1 This Standard applies to single-polarity connectors for use

45、 with all alloys of copper or aluminum, or copper-clad aluminum conductors, or all three, for providing contacts between current-carrying parts, in accordance with the Canadian Electrical Code, Part I, C22.1, in Canada, the National Electrical Code, NFPA-70, in the United States of America, or the S

46、tandard for Electrical Installations, NOM-001-SEDE, in Mexico, as follows: Note: Copper-clad aluminum conductors are for use only in the United States in accordance with the National Electrical Code, NFPA 70. a) pressure wire connectors intended to hold one or more conductor(s); b) connectors intend

47、ed for use in appliances and equipment that comply with the requirements for such appliances and equipment; c) soldering connectors; d) splicing wire connectors intended for use with 4 AWG (21.2 mm 2 ) or larger conductors; Note: A splicing wire and cable connector taking a range of conductor sizes

48、may include conductor sizes smaller than 4 AWG (21.2 mm 2 ). e) neutral bars; f) uninsulated connectors that are used in circuits rated 35 000 V and below; g) ampere-rated connectors not intended for general use; and h) insulation piercing connectors. 1.2 This Standard is intended for connectors sui

49、table for use with conductors in the size ranges as follows: a) Aluminum 1) 12 AWG (3.3 mm 2 ) and 10 AWG (5.3 mm 2 ) solid; 2) 12 AWG (3.3 mm 2 ) to 2 000 kcmil (1 010 mm 2 ) stranded, Class B concentric, compressed, and compact; and 3) 12 AWG (3.3 mm 2 ) to 1 000 kcmil (508 mm 2 ) stranded single input wire (SIW). b) Copper-clad aluminum 1) In Canada, this construction is not allowed. 2) In Mexico, this construction is not allowed. 3) In the Uni