UL 60730-2-13A-2002 UL Standard for Safety Automatic Electrical Controls for Household and Similar Use Part 2 Particular Requirements for Humidity Sensing Controls (First Edition)《_1.pdf

1、U L 60730-2- 1 3A ISBN 0-7629-0549-2 Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Humidity Sensing Controls FEBRUARY 5,2002 - UL 60730-2-13A trl Underwriters Laboratories Inc. (UL) 333 Pfingsten Road Northbrook, IL 60062-2096 UL Standard for Safety

2、 for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Humidity Sensing Controls, UL 60730-2-1 3A First Edition, Dated February 5, 2002 The revised requirements are substantially in accordance with UL?s Bulletin(s) on this subject dated November 18, 199

3、9. The bulletin(s) is now obsolete and may be discarded. The master for this Standard at UL?s Northbrook Office is the official document insofar as it relates to a UL service and the compliance of a product with respect to the requirements for that product and service, or if there are questions rega

4、rding the accuracy of this Standard. UL?s Standards for Safety are copyrighted by UL. Neither a printed copy of a Standard, nor the distribution diskette for a Standard-on-Diskette and the file for the Standard on the distribution diskette should be altered in any way. All of UL?s Standards and all

5、copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording,

6、or otherwise without prior permission of UL. Revisions of UL Standards for Safety are issued from time to time. A UL Standard for Safety is current only if it incorporates the most recently adopted revisions. UL provides this Standard ?as is? without warranty of any kind, either expressed or implied

7、, including but not limited to, the implied warranties of merchantability or fitness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of profits, lost savings, loss of data, or any other damages arising out of the

8、use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall UL?s liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. UL will attempt to answer

9、 support requests concerning electronic versions of its Standards. However, this support service is offered on a reasonable efforts basis only, and UL may not be able to resolve every support request. UL supports the electronic versions of its Standards only if they are used under the conditions and

10、 operating systems for which it is intended. UL?s support policies may change from time-to-time without notification. UL reserves the right to change the format, presentation, file types and formats, delivery methods and formats, and the like of both its printed and electronic Standards without prio

11、r notice. Purchasers of the electronic versions of UL?s Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgement (including reasonable attorney?s fees) resulting from any error or deviation introduced while purch

12、aser is storing an electronic Standard on the purchaser?s computer system. tr2 FEBRUARY 5,2002 - UL 60730-2-13A If a single-user version electronic Standard was purchased, one copy of this Standard may be stored on the hard disk of a single personal computer, or on a single LAN file-server or the pe

13、rmanent storage device of a multiple-user computer in such a manner that this Standard may only be accessed by one user at a time and for which there is no possibility of multiple concurrent access. If a multiple-user version electronic Standard was purchased, one copy of the Standard may be stored

14、on a single LAN file-server, or on the permanent storage device of a multiple-user computer, or on an Intranet server. The number of concurrent users shall not exceed the number of users authorized. Electronic Standards are intended for on-line use, such as for viewing the requirements of a Standard

15、, conducting a word search, and the like. Only one copy of the Standard may be printed from each single-user version of an electronic Standard. Only one copy of the Standard may be printed for each authorized user of a multiple-user version of an electronic Standard. Because of differences in the co

16、mputer/software/printer setup used by UL and those of electronic Standards purchasers, the printed copy obtained by a purchaser may not look exactly like the on-line screen view or the printed Standard. An employee of an organization purchasing a UL Standard can make a copy of the page or pages bein

17、g viewed for their own fair and/or practical internal use. The requirements in this Standard are now in effect, except for those paragraphs, sections, tables, figures, and/or other elements of the Standard having future effective dates as indicated in the preface. The prior text for requirements tha

18、t have been revised and that have a future effective date are located after the Standard, and are preceded by a “SUPERSEDED REQUIREMENTS notice. New product submittals made prior to a specified future effective date will be judged under all of the requirements in this Standard including those requir

19、ements with a specified future effective date, unless the applicant specifically requests that the product be judged under the current requirements. However, if the applicant elects this option, it should be noted that compliance with all the requirements in this Standard will be required as a condi

20、tion of continued Listing, Recognition, and Follow-Up Services after the effective date, and understanding of this should be signified in writing. Copyright O 2002 Underwriters Laboratories Inc. This Standard consists of pages dated as shown in the following checklist: Page Date 1-22. . . . . . . .

21、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . February 5, 2002 FEBRUARY 5,2002 1 UL 60730-2-13A Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Humidity

22、 Sensing Controls Prior to the first edition of UL 60730-2-13A, the requirements for the products covered by this Standard were included in UL 60730-2-13. First Edition February 5,2002 An effective date included as a note immediately following certain requirements is one established by Underwriters

23、Laboratories Inc. Revisions of this Standard will be made by issuing revised or additional pages bearing their date of issue. A UL Standard is current only if it incorporates the most recently adopted revisions, all of which are itemized on the transmittal notice that accompanies the latest set of r

24、evised requirements. ISBN 0-7629-0549-2 COPYRIGHT O 1999, 2002 UNDERWRITERS LABORATORIES INC. 2 UL 60730-2-13A FEBRUARY 5,2002 No Text on This Page FEBRUARY 5. 2002 UL 60730-2-13A 3 CONTENTS Preface (UL) 5 Foreword (UL) 6 NATIONAL DIFFERENCES . 7 FOREWORD 8 1 Scope and normative references . 11 2 De

25、finitions 12 2.2 Definitions of types of control according to purpose 12 3 General requirements 12 4 General notes on tests . 12 5 Rating 12 6 Classification 12 7 Information 13 8 Protection against electric shock . 13 9 Provision for protective earthing . 13 1 O Terminals and TERMINATIONS . 13 11 C

26、onstructional requirements 13 12 Moisture and dust resistance 13 13 Electric strength and insulation resistance . 13 . 16 Environmental stress 14 17 Endurance 14 17.1.3 Test sequence and conditions 14 17.8 Test of AUTOMATIC ACTION at accelerated rate 14 17.1 6 Tests for particular purpose controls .

27、 15 18 Mechanical strength . 15 19 Threaded parts and connections 15 20 CREEPAGE DISTANCES, CLEARANCES and distances through insulation . 15 21 Resistance to heat, fire and tracking 15 22 Resistance to corrosion 15 23 Radio interference suppression . 15 24 Components . 16 25 Normal OPERATION 26 OPER

28、ATION with ma 27 Abnormal OPERATION 28 Guidance on the use of electronic disconnection . 16 UL 60730-2-13A FEBRUARY 5,2002 4 Figures Annexes Annex C Cotton used for mercury switch test Annex D Heat, fire and tracking Annex H (normative) Requirements for electronic controls H.6.18 According to softwa

29、re class . 17 .I7 .I 7 H.7 Information . H.23 Electromagnetic compatibility (EMC) requirements - Emission H.26 Electromagnetic CO . .I7 H.26.4 Test of the in H.26.5 Test of the infl network . . .I9 . .I9 . .20 21 H.26.8 1,2/50 ps - 8/20 ps voltage-current surge test . H.26.9 Fast transient burst tes

30、t . H.26.10 Ring wave test H.26.12 Radiated electromagnetic field test . . Annex AA AA.l Number of cycles for INDEPENDENTLY MOUNTED and IN-LINE CORD CONTROLS . .21 USA) . .21 AA.2 Minimum number of cycles for INDEPENDENTLY MOUNTED and IN-LINE CORD CONTROLS (Canada and the FEBRUARY 5,2002 UL 60730-2-

31、13A 5 Preface (UL) This UL Standard 60730-2-1 3A, Standard for Safety for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Humidity Sensing Controls, is to be used in conjunction with the third edition of UL 60730-IA. The requirements for humidity sens

32、ing controls are contained in this part 2 Standard and UL 60730-IA. Requirements of this part 2 Standard, where stated, amend the requirements of UL 60730-IA. Where a particular subclause of UL 60730-IA is not mentioned in 60730-2-13A, the UL 60730-IA subclause applies. The text, figures and tables

33、of IEC Publication Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Humidity Sensing Controls, IEC 60730-2-13 copyright 1995, are used in this Standard with the consent of the IEC and the American National Standards Institute (ANSI). The IEC copyrighte

34、d material has been reproduced with permission from ANSI. ANSI should be contacted regarding the reproduction of any portion of the IEC material. The IEC Foreword and Introduction are not a part of the requirements of this Standard but are included for information purposes only. Copies of IEC Public

35、ation 60730-2-13 may be purchased from ANSI, 11 West 42nd Street, New York, New York, 10036, (212) 642-4900. Note - Although the intended primary application of this Standard is stated in its Scope, it is important to note that it remains the responsibility of the users of the Standard to judge its

36、suitability for their particular purpose. 6 UL 60730-2-13A FEBRUARY 5,2002 Foreword (U L) A. This Standard contains basic requirements for products covered by Underwriters Laboratories Inc. (UL) under its Follow-Up Service for this category within the limitations given below and in the Scope section

37、 of this Standard. These requirements are based upon sound engineering principles, research, records of tests and field experience, and an appreciation of the problems of manufacture, installation, and use derived from consultation with and information obtained from manufacturers, users, inspection

38、authorities, and others having specialized experience. They are subject to revision as further experience and investigation may show is necessary or desirable. B. The observance of the requirements of this Standard by a manufacturer is one of the conditions of the continued coverage of the manufactu

39、rers product. C. A product which complies with the text of this Standard will not necessarily be judged to comply with the Standard if, when examined and tested, it is found to have other features which impair the level of safety contemplated by these requirements. D. A product that contains feature

40、s, characteristics, components, materials, or systems new or different from those covered by the requirements in this standard, and that involves a risk of fire or of electric shock or injury to persons shall be evaluated using appropriate additional component and end-product requirements to maintai

41、n the level of safety as originally anticipated by the intent of this standard. A product whose features, characteristics, components, materials, or systems conflict with specific requirements or provisions of this standard does not comply with this standard. Revision of requirements shall be propos

42、ed and adopted in conformance with the methods employed for development, revision, and implementation of this standard. E. UL, in performing its functions in accordance with its objectives, does not assume or undertake to discharge any responsibility of the manufacturer or any other party. The opini

43、ons and findings of UL represent its professional judgment given with due consideration to the necessary limitations of practical operation and state of the art at the time the Standard is processed. UL shall not be responsible to anyone for the use of or reliance upon this Standard by anyone. UL sh

44、all not incur any obligation or liability for damages, including consequential damages, arising out of or in connection with the use, interpretation of, or reliance upon this Standard. F. Many tests required by the Standards of UL are inherently hazardous and adequate safeguards for personnel and pr

45、operty shall be employed in conducting such tests. FEBRUARY 5,2002 UL 60730-2-13A 7 NATIONAL DIFFERENCES GENERAL National Differences from the text of International Electrotechnical Commission (IEC) Publication 60730-2-1 3, Automatic Electrical Controls for Household and Similar Use; Part 2: Particu

46、lar Requirements for Humidity Sensing Controls, copyright 1995, are indicated by notations (differences) and are presented in bold text. There are five types of National Differences as noted below. The difference type is noted on the first line of the National Difference in the standard. The standar

47、d may not include all types of these National Differences. DR - These are National Differences based on the National Electrical Code (NEC) and other U.S. Regulatory Requirements. DI - These are National Differences which are based on basic safety principles and requirements, elimination of which wou

48、ld compromise safety for U.S. consumers and users of products. D2 - These are National Differences based on safety practices. These are differences for IEC requirements that may be acceptable, but adopting the IEC requirements would require considerable retesting or redesign on the manufacturers par

49、t. DC - These are National Differences based on the component standards and will not be deleted until a particular component standard is harmonized with the IEC component standard. DE - These are National Differences based on editorial comments or corrections. a UL 60730-2-13A FEBRUARY 5,2002 INTERNATIONAL ELECTROTECHNICAL COMMISSION AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - Part 2: Particular Requirements for Humidity Sensing Controls FOREWORD 1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising all national el