UL 60730-2-6-2002 UL Standard for Safety Automatic Electrical Controls for Household and Similar Use Part 2 Particular Requirements for Automatic Electrical Pressure Sensing Controdi.pdf

1、UL 60730-2-6ISBN 0-7629-0577-8Automatic Electrical Controlsfor Household and Similar Use;Part 2: ParticularRequirements for AutomaticElectrical Pressure SensingControls Including MechanicalRequirementsUnderwriters Laboratories Inc. (UL)333 Pfingsten RoadNorthbrook, IL 60062-2096UL Standard for Safet

2、y for Automatic Electrical Controls for Household and Similar Use; Part 2: ParticularRequirements for Automatic Electrical Pressure Sensing Controls Including Mechanical Requirements, UL60730-2-6First Edition, Dated October 30, 2002The master for this Standard at ULs Northbrook Office is the officia

3、l document insofar as it relates to aUL service and the compliance of a product with respect to the requirements for that product and service,or if there are questions regarding the accuracy of this Standard.ULs Standards for Safety are copyrighted by UL. Neither a printed copy of a Standard, nor th

4、e distributiondiskette for a Standard-on-Diskette and the file for the Standard on the distribution diskette should bealtered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding thoseStandards shall remain the sole and exclusive property of UL.All rights reserved. N

5、o part of this publication may be reproduced, stored in a retrieval system, ortransmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwisewithout prior permission of UL.Revisions of UL Standards for Safety are issued from time to time. A UL Standard for Safety i

6、s currentonly if it incorporates the most recently adopted revisions.UL provides this Standard as is without warranty of any kind, either expressed or implied, including butnot limited to, the implied warranties of merchantability or fitness for any purpose.In no event will UL be liable for any spec

7、ial, incidental, consequential, indirect or similar damages,including loss of profits, lost savings, loss of data, or any other damages arising out of the use of or theinability to use this Standard, even if UL or an authorized UL representative has been advised of thepossibility of such damage. In

8、no event shall ULs liability for any damage ever exceed the price paid forthis Standard, regardless of the form of the claim.UL will attempt to answer support requests concerning electronic versions of its Standards. However, thissupport service is offered on a reasonable efforts basis only, and UL

9、may not be able to resolve everysupport request. UL supports the electronic versions of its Standards only if they are used under theconditions and operating systems for which it is intended. ULs support policies may change fromtime-to-time without notification.UL reserves the right to change the fo

10、rmat, presentation, file types and formats, delivery methods andformats, and the like of both its printed and electronic Standards without prior notice.Purchasers of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and holdUL harmless from and against any loss, expense

11、, liability, damage, claim, or judgement (includingreasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing anelectronic Standard on the purchasers computer system.If a single-user version electronic Standard was purchased, one copy of this Standard may

12、be stored onthe hard disk of a single personal computer, or on a single LAN file-server or the permanent storagedevice of a multiple-user computer in such a manner that this Standard may only be accessed by one userat a time and for which there is no possibility of multiple concurrent access.OCTOBER

13、 30, 2002 UL 60730-2-6 tr1If a multiple-user version electronic Standard was purchased, one copy of the Standard may be stored ona single LAN file-server, or on the permanent storage device of a multiple-user computer, or on an Intranetserver. The number of concurrent users shall not exceed the numb

14、er of users authorized.Electronic Standards are intended for on-line use, such as for viewing the requirements of a Standard,conducting a word search, and the like. Only one copy of the Standard may be printed from eachsingle-user version of an electronic Standard. Only one copy of the Standard may

15、be printed for eachauthorized user of a multiple-user version of an electronic Standard. Because of differences in thecomputer/software/printer setup used by UL and those of electronic Standards purchasers, the printedcopy obtained by a purchaser may not look exactly like the on-line screen view or

16、the printed Standard.An employee of an organization purchasing a UL Standard can make a copy of the page or pages beingviewed for their own fair and/or practical internal use.The requirements in this Standard are now in effect, except for those paragraphs, sections, tables, figures,and/or other elem

17、ents of the Standard having future effective dates as indicated in the preface. The priortext for requirements that have been revised and that have a future effective date are located after theStandard, and are preceded by a SUPERSEDED REQUIREMENTS notice.New product submittals made prior to a speci

18、fied future effective date will be judged under all of therequirements in this Standard including those requirements with a specified future effective date, unlessthe applicant specifically requests that the product be judged under the current requirements. However, ifthe applicant elects this optio

19、n, it should be noted that compliance with all the requirements in thisStandard will be required as a condition of continued Listing, Recognition, and Follow-Up Services afterthe effective date, and understanding of this should be signified in writing.In an effort to more closely match the IEC text,

20、 information in the following checklist related to annexesthat do not correlate correctly at this time with the annex identification in the annexes themselves will becorrected in future revision cycles.Copyright 2002 Underwriters Laboratories Inc.This Standard consists of pages dated as shown in the

21、 following checklist:Page Date1-38 .October 30, 2002A1-A2October 30, 2002OCTOBER 30, 2002 UL 60730-2-6tr2OCTOBER 30, 20021UL 60730-2-6Standard for Automatic Electrical Controls for Household and Similar Use;Part 2: Particular Requirements for Automatic Electrical Pressure SensingControls Including M

22、echanical RequirementsPrior to the first edition of UL 60730-2-6, the requirements for the productscovered by this Standard were included in UL 8730-2-6.First EditionOctober 30, 2002An effective date included as a note immediately following certain requirementsis one established by Underwriters Labo

23、ratories Inc.Revisions of this Standard will be made by issuing revised or additional pagesbearing their date of issue. A UL Standard is current only if it incorporates themost recently adopted revisions, all of which are itemized on the transmittal noticethat accompanies the latest set of revised r

24、equirements.ISBN 0-7629-0577-8COPYRIGHT 1998, 2002 UNDERWRITERS LABORATORIES INC.OCTOBER 30, 2002UL 60730-2-62No Text on This PageCONTENTSPreface (UL) 5Foreword (UL) 6NATIONAL DIFFERENCES .7FOREWORD 81 Scope 112 Definitions 122.2 Definitions of types of control according to purpose 122.3 Definitions

25、 relating to the function of controls .132.8 Definitions relating to component parts of controls .143 General requirement .144 General notes on tests .144.1 Conditions of test 144.4 Additional subclause: 145 Rating 146 Classification 147 Information 158 Protection against electric shock .169 Provisi

26、on for protective earthing .1610 Terminals and TERMINATIONS .1710.1 Terminals and TERMINATIONS for external copper conductors .1711 Constructional requirements 1711.4 Actions 1711.6 Mounting of controls 1811.11 Requirements during mounting, maintenance and SERVICING .1911.101 Construction requiremen

27、ts relating to operating mechanism .2212 Moisture and dust resistance .2213 Electric strength and insulation resistance .2214 Heating 2215 MANUFACTURING DEVIATION and DRIFT 2216 Environmental stress 2317 Endurance .2317.16 Tests for particular purpose controls .2418 Mechanical strength .2518.101 Med

28、ium leakage .2518.102 Strength of parts (hydrostatic) .2719 Threaded parts and connections 2720 CREEPAGE DISTANCES, CLEARANCES and distances through insulation .2721 Resistance to heat, fire and tracking 2822 Resistance to corrosion 2823 Radio interference suppression .2824 Components .2825 Normal O

29、PERATION 2826 OPERATION with mains borne perturbations 2827 Abnormal OPERATION .2828 Guidance on the use of electronic disconnection .28OCTOBER 30, 2002 UL 60730-2-6 3AnnexesAnnex H Requirements for electronic controlsH.7 Information 29H.26 OPERATION with mains borne perturbations, magnetic and elec

30、tromagnetic disturbances 29H.26.4 Test of the influence of signal voltages in the power supply networks .30H.26.5 Test of the influence of voltage dips and short voltage interruptions in the power supplynetwork .30H.26.6 Test of influence of voltage unbalance 31H.26.7 Test of the influence of d.c. i

31、n a.c. networks .31H.26.8 1,2/50s 8/20s voltage-current surge test .31H.26.9 Fast transient burst test .31H.26.10 Ring wave test 31H.26.11 Electrostatic discharge test .32H.26.12 Radiated electromagnetic field test 32H.26.13 Evaluation of compliance .33H.27 Abnormal OPERATION .33Annex AAAA.1 Number

32、of cycles for INDEPENDENTLY MOUNTED CONTROLS 33AA.2 Cycling rate for INDEPENDENTLY MOUNTED CONTROLS .34Annex BB Stainless Steel for Bellows, Bourdon Tubes or Similar ElementsAnnex 6.DVA Manufacturing and Production Tests (normative)OCTOBER 30, 2002UL 60730-2-64Preface (UL)This UL Standard 60730-2-6,

33、 Standard for Safety for Automatic Electrical Controls for Household andSimilar Use; Part 2: Particular Requirements for Automatic Electrical Pressure Sensing Controls IncludingMechanical Requirements, is to be used in conjunction with the third edition of UL 60730-1A. Therequirements for automatic

34、electrical pressure sensing controls including mechanical requirements arecontained in this part 2 Standard and UL 60730-1A.Requirements of this part 2 Standard, where stated, amend the requirements of UL 60730-1A.Where a particular subclause of UL 60730-1A is not mentioned in UL 60730-2-6, the UL 6

35、0730-1Asubclause applies.The text, figures and tables of IEC Publication Automatic Electrical Controls for Household and SimilarUse; Part 2: Particular Requirements for Automatic Electrical Pressure Sensing Controls IncludingMechanical Requirements, IEC 60730-2-6 copyright 1991, as amended in 1994 a

36、re used in this Standardwith the consent of the IEC and the American National Standards Institute (ANSI). The IEC copyrightedmaterial has been reproduced with permission from ANSI. ANSI should be contacted regarding thereproduction of any portion of the IEC material. The IEC Foreword and Introductio

37、n are not a part of therequirements of this Standard but are included for information purposes only. Copies of IEC Publication60730-2-6 may be purchased from ANSI, 11 West 42ndStreet, New York, New York, 10036, (212)642-4900.Note Although the intended primary application of this Standard is stated i

38、n its Scope, it is important to notethat it remains the responsibility of the users of the Standard to judge its suitability for their particular purpose.OCTOBER 30, 2002 UL 60730-2-6 5Foreword (UL)A. This Standard contains basic requirements for products covered by Underwriters Laboratories Inc. (U

39、L)under its Follow-Up Service for this category within the limitations given below and in the Scope sectionof this Standard. These requirements are based upon sound engineering principles, research, records oftests and field experience, and an appreciation of the problems of manufacture, installatio

40、n, and usederived from consultation with and information obtained from manufacturers, users, inspection authorities,and others having specialized experience. They are subject to revision as further experience andinvestigation may show is necessary or desirable.B. The observance of the requirements o

41、f this Standard by a manufacturer is one of the conditions of thecontinued coverage of the manufacturers product.C. A product which complies with the text of this Standard will not necessarily be judged to comply withthe Standard if, when examined and tested, it is found to have other features which

42、 impair the level ofsafety contemplated by these requirements.D. A product that contains features, characteristics, components, materials, or systems new or differentfrom those covered by the requirements in this standard, and that involves a risk of fire or of electric shockor injury to persons sha

43、ll be evaluated using appropriate additional component and end-productrequirements to maintain the level of safety as originally anticipated by the intent of this standard. Aproduct whose features, characteristics, components, materials, or systems conflict with specificrequirements or provisions of

44、 this standard does not comply with this standard. Revision of requirementsshall be proposed and adopted in conformance with the methods employed for development, revision, andimplementation of this standard.E. UL, in performing its functions in accordance with its objectives, does not assume or und

45、ertake todischarge any responsibility of the manufacturer or any other party. The opinions and findings of ULrepresent its professional judgment given with due consideration to the necessary limitations of practicaloperation and state of the art at the time the Standard is processed. UL shall not be

46、 responsible to anyonefor the use of or reliance upon this Standard by anyone. UL shall not incur any obligation or liability fordamages, including consequential damages, arising out of or in connection with the use, interpretation of,or reliance upon this Standard.F. Many tests required by the Stan

47、dards of UL are inherently hazardous and adequate safeguards forpersonnel and property shall be employed in conducting such tests.OCTOBER 30, 2002UL 60730-2-66NATIONAL DIFFERENCESGENERALNational Differences from the text of International Electrotechnical Commission (IEC) Publication60730-2-6, Automa

48、tic Electrical Controls for Household and Similar Use; Part 2: Particular Requirementsfor Automatic Electrical Pressure Sensing Controls Including Mechanical Requirements copyright 1991 asamended in 1994 are indicated by notations (differences) and are presented in bold text.There are five types of

49、National Differences as noted below. The difference type is noted on the first lineof the National Difference in the standard. The standard may not include all types of these NationalDifferences.DR These are National Differences based on the National Electrical Code (NEC) and other U.S.Regulatory Requirements.D1 These are National Differences which are based on basic safety principles and requirements,elimination of which would compromise safety for U.S. consumers and users of products.D2 These are National Differences based on safety practices. These are d