UL 60950-21 (ND)-2003 National Differences For UL 60950-21 Information Technology Equipment - Safety - Part 21 Remote Power Feeding (First Edition)《UL 60950-21信息技术设备的国家差异 安全性 第21部分.pdf

1、 National Differences For UL 60950-21 Information Technology Equipment - Safety - Part 21: Remote Power Feeding 2 NATIONAL DIFFERENCES FOR UL 60950-21 NOVEMBER 10, 2003 _ Underwriters Laboratories Inc. National Differences For UL 60950-21 Information Technology Equipment - Safety - Part 21: Remote P

2、ower Feeding Edition: 1 Edition Date: November 10, 2003 This is the publication of the first edition of UL 60950-21 which includes the adoption of the UL national differences to IEC 60950-21. This document provides a single listing of the National Differences included in the UL adoption of the corre

3、sponding IEC standard. Editorial differences appearing in the UL standard are not included in this technical compilation. The complete listing of National Differences is available in the UL standard. The master for this standards document at ULs Northbrook Office is the official standards document i

4、nsofar as it relates to a UL service and the compliance of a product with respect to the requirements for that product and service, or if there are questions regarding the accuracy of this document. ULs standards documents are copyrighted by UL. Neither a printed copy of a standards document, nor th

5、e electronic file for a standards document should be altered in any way. All of ULs standards documents and all copyrights, ownerships, and rights regarding those standards documents shall remain the sole and exclusive property of UL. All rights reserved. No part of this standards document may be re

6、produced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL provides this standards document “as is“ without warranty of any kind, either expressed or implied, including but not limit

7、ed to, the implied warranties of merchantability or fitness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of profits, lost savings, loss of data, or any other damages arising out of the use of or the inability t

8、o use this standards document, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this standards document, regardless of the form of the claim. UL reserves the right to change

9、 the format, presentation, file types and formats, delivery methods and formats, and the like of both its printed and electronic Standards documents without prior notice. 3 NATIONAL DIFFERENCES FOR UL 60950-21 NOVEMBER 10, 2003 _ Underwriters Laboratories Inc. Purchasers of the electronic versions o

10、f ULs standards documents agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgement (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electronic standards document on

11、the purchasers computer system. If a single-user version electronic standards document was purchased, one copy of this standards document may be stored on the hard disk of a single personal computer, or on a single LAN file-server or the permanent storage device of a multiple-user computer, or made

12、available through the purchasers Intranet in such a manner that this standards document may only be accessed by one user at a time and for which there is no possibility of multiple simultaneous, concurrent access. If a multiple-user version electronic standards document was purchased, one copy of th

13、e standards document may be stored on a single LAN file-server, or on the permanent storage device of a multiple-user computer, or made available through the purchasers Intranet. The number of simultaneous, concurrent users shall not exceed the number of users authorized. Electronic standards docume

14、nts are intended for on-line use, such as for viewing the requirements of a standards document, conducting a word search, and the like. Only one copy of the standards document may be printed from each single-user version of an electronic standards document. Only one copy of the standards document ma

15、y be printed for each authorized user of a multiple-user version of an electronic standards document. Because of differences in the computer/software/printer setup used by UL and those of electronic standards document purchasers, the printed copy obtained by a purchaser may not look exactly like the

16、 on-line screen view or the printed standards document. An employee of an organization purchasing a UL standards document can make a copy of the page or pages being viewed for their own fair and/or practical internal use. Copyright 2009 Underwriters Laboratories Inc. 4 NATIONAL DIFFERENCES FOR UL 60

17、950-21 NOVEMBER 10, 2003 _ Underwriters Laboratories Inc. Preface This document provides a single listing of the technical National Differences included in the UL adoption of the corresponding IEC standard. Editorial National Differences (those marked DE) are not included in this technical compilati

18、on. In its IEC-based standards, UL uses the notations indicated below to identify national difference type, and these types are additionally noted in this document. The standard may not use all types of these deviations. DR - These are differences based on the National Electrical Code (NEC) and othe

19、r U.S. Regulatory Requirements. D1 - These are differences which are based on basic safety principles and requirements, elimination of which would compromise safety for U.S. consumers and users of products. Requirements related to these National Differences are based on North American regulatory req

20、uirements and are specified in Annex NAE. D2 - These are differences based on safety practices. These are differences for IEC requirements that may be acceptable, but adopting the IEC requirements would require considerable retesting or redesign on the manufacturers part. Some of these National Diff

21、erences are Markings and Instructions Requirements and are specified in Annex NAA. D3 These are national differences based on bi-national requirements which result in less stringent requirements than in IEC 60950-1. DC - These are differences based on the component standards and will not be deleted

22、until a particular component standard is harmonized with the IEC component standard. Component requirements for these deviations are specified in Annexes P.1 and P.2. DE These are differences based on editorial comments or corrections. 5 NATIONAL DIFFERENCES FOR UL 60950-21 NOVEMBER 10, 2003 _ Under

23、writers Laboratories Inc. National Differences 2 Modified by the following: Addition D2 All references to IEC 60950-1 in this standard are replaced by the equivalent UL and CSA 60950-1 binational Standards as listed below. (Either the first or second editions of CSA/UL 60950-1 may be used.) All rele

24、vant Standards referenced in the Part 1 Standard (Annex P, including P.1 and P.2) also apply to this Part 21 Standard and are not listed below. All references to clauses and subclauses in IEC 60950-1 are to the second edition. If the relevant clause or subclause has been renumbered in IEC 60950-1, s

25、econd edition, the first edition reference is identified in parentheses directly after the second edition reference. D2 CAN/CSA-C22.2 No. 60950-1-03 or CAN/CSA-C22.2 No. 60950-1-07, Information Technology Equipment - Safety - Part 1: General Requirements D2 UL 60950-1, First or Second Edition, Infor

26、mation Technology Equipment - Safety - Part 1: General Requirements Deletion D2 to reference of IEC 60950-1:2001 6.2.1 Limits under normal operating conditions - second dash replaced with: D3 available power and current from an RFT-V CIRCUIT shall be in accordance with Table 1; 6 NATIONAL DIFFERENCE

27、S FOR UL 60950-21 NOVEMBER 10, 2003 _ Underwriters Laboratories Inc. Table 1 Added: D3 Table 1 - RFT-V CIRCUITS, power and current limitations D3 Maximum output current bD3 If provided with an overcurrent protective device cD3 Rated output eD3 Maximum power output fD3 Output voltage aUoc D3 Inherent

28、ly limited D3 Maximum overcurrent protection D3 Maximum current from the source dD3 Inherently limited D3 Overcurrent protective device D3 V dc A VA D3 100 250 D3 100 and 200 1,3 1 1 000/Uoc 100 150 150 D3 Notes: D3 aUoc is the greatest open circuit voltage between any conductor of the RFT-V CIRCUIT

29、 and earth with a 1 megaohm resistor connected across the terminals of the measuring instrument. D3 bIn this context, “overcurrent protection device“ refers to devices such as fuses, circuit breakers or other devices that would permit higher short-term energy levels through the device without openin

30、g or limiting the energy, such as can occur during intermittent arcing conditions. D3 cThe maximum continuous current from RFT-V CIRCUIT that may be supplied to telecommunication wiring unless the system is designed for higher currents and the ampacity of the wiring is specified and controlled. D3 d

31、Maximum current under any condition of overload with the overcurrent protection device bypassed. D3 eFunctional design rated output as declared by the manufacturer. Paralleling of power sources over multiple telecommunications wires for the purpose of delivering power in excess of 100 VA to a single load circuit is not permitted. D3 fMaximum power under any non-capacitive load measured 1 s after application of the load with the overcurrent protection device bypassed (if provided).