UL 61010-2-201-2014 UL Standard for Safety Requirements for Electrical Equipment for Measurement Control and Laboratory Use C Part 2-201 Particular Requirements for Control Equipme.pdf

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 61010-2-201 (IEC 61010-2-201:2013) Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use Part 2-201: Particular Requirements for Control EquipmentUL COPYR

2、IGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety Requirements for Electrical Equipment for Measurement, Control, and Labo

3、ratory Use Part 2-201: Particular Requirements for Control Equipment, UL 61010-2-201 (IEC 61010-2-201:2013) First Edition, Dated January 24, 2014 Summary of Topics Adoption of IEC 61010-2-201, Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use Part 2-201: Parti

4、cular Requirements for Control Equipment (rst edition issued February 2013) as a new IEC-based UL standard, UL 61010-2-201 (IEC 61010-2- 201:2013), with no National Differences. The new requirements are substantially in accordance with Proposal(s) on this subject dated November 22, 2013. All rights

5、reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL provides this Standard as is without warranty of any kind, either expressed

6、or implied, including but not limited to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of prots, lost savings, loss of data, or any other damages arising out o

7、f the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. Users of the electro

8、nic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electronic Standard

9、 on the purchasers computer system. The requirements in this Standard are now in effect, except for those paragraphs, sections, tables, gures, and/or other elements of the Standard having future effective dates as indicated in the preface. The prior text for requirements that have been revised and t

10、hat have a future effective date are located after the Standard, and are preceded by a SUPERSEDED REQUIREMENTS notice. JANUARY 24, 2014 UL 61010-2-201 (IEC 61010-2-201:2013) tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL JANUARY 24, 2014

11、 UL 61010-2-201 (IEC 61010-2-201:2013) tr2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL JANUARY 24, 2014 1 UL 61010-2-201 (IEC 61010-2-201:2013) Standard for Safety Requirements for Electrical Equipment for Measurement

12、, Control, and Laboratory Use Part 2-201: Particular Requirements for Control Equipment First Edition January 24, 2014 This ANSI/UL Standard for Safety consists of the First Edition dated January 24, 2014. The most recent designation of ANSI/UL 61010-2-201 (IEC 61010-2-201:2013) as an American Natio

13、nal Standard (ANSI) occurred on January 24, 2014. ANSI approval for a standard does not include the Cover Page, Transmittal Pages, Title Page, Preface, or effective date information. The National Difference Page and IEC Foreword are also excluded from the ANSI approval of IEC-based standards. Commen

14、ts or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at http:/. ULs Standards for Safety are copyrighted by UL. Neither a printed nor electro

15、nic copy of a Standard should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. COPYRIGHT 2014 UNDERWRITERS LABORATORIES INC. ANSI/UL 61010-2-201-2014UL COPYRIGHTED MATERIAL NOT AUTHORI

16、ZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL JANUARY 24, 2014 UL 61010-2-201 (IEC 61010-2-201:2013) 2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS PREFACE 6 FOREWORD 7 INTRODUCTION .

17、9 1 Scope and object 10 2 Normative references .12 3 Terms and denitions 13 4 Tests .14 4.1 General 14 4.4 Testing in single fault condition 15 5 Marking and documentation .16 6 Protection against electric shock .16 6.10 Connection to the mains supply source and connections between parts of equipmen

18、t .32 6.11 Disconnection from supply source 32 7 Protection against mechanical hazards .32 7.2 Sharp edges 33 7.7 Expelled parts 34 8 Resistance to mechanical stresses .34 8.3 Drop test .35 9 Protection against the spread of re 35 9.2 Eliminating or reducing the sources of ignition within the equipm

19、ent .35 10 Equipment temperature limits and resistance to heat 36 10.1 Surface temperature limits for protection against burns .36 10.3 Other temperature measurements 37 11 Protection against hazards from uids .39 11.6 Specially protected equipment .39 12 Protection against radiation, including lase

20、r sources, and against sonic and ultrasonic pressure .39 13 Protection against liberated gases and substances, explosion and implosion .40 13.1 Poisonous and injurious gases and substances 40 14 Components and subassemblies .40 14.101 Components bridging insulation 40 14.102 Switching devices 41 15

21、Protection by interlocks 41 16 Hazards resulting from application 41 17 Risk assessment .42 Annexes Annex F (normative) Routine tests F.2 Protective earth 44 F.3.1 General 44 F.4 Floating circuits 44 F.101 Supply circuits other than mains and oating circuits .44 JANUARY 24, 2014 UL 61010-2-201 (IEC

22、61010-2-201:2013) 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Annex L (informative) Index of dened terms Annex AA (informative) General approach to safety for control equipment AA.1 Personnel 47 AA.1.1 General .47 AA.1.2 Operator 47 AA.

23、1.3 Service personnel 48 AA.2 Operating access areas .48 AA.3 Service access areas .48 AA.4 Equipment types 48 AA.4.1 General .48 AA.4.2 Open equipment .48 AA.4.3 Enclosed equipment 49 Annex BB (informative) System drawing of isolation boundaries BB.1 General .50 BB.2 Installation environment of ope

24、n control equipment .50 BB.3 Control equipment electrical safety drawing 52 BB.4 Applying the standard to the control equipment electrical safety drawing 54 BB.5 Example methodologies for electrical safety and documentation 55 BB.6 Conclusion .58 Annex CC (informative) Historical techniques for seco

25、ndary circuits CC.1 Secondary circuits background .59 CC.2 Secondary circuits without risk of electrical shock 59 CC.2.1 General .59 CC.2.2 Secondary circuits which do not pose a risk of electrical shock 60 CC.3 Secondary circuits without risk of spread of re 61 CC.3.1 General .61 CC.3.2 Secondary c

26、ircuits which do not pose a risk of spread of re 62 Annex DD (informative) Cross references between IEC 61010-2-201 and IEC 61010-1:2010 or IEC 61131-2:2007 Bibliography JANUARY 24, 2014 UL 61010-2-201 (IEC 61010-2-201:2013) 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIB

27、UTION WITHOUT PERMISSION FROM UL JANUARY 24, 2014 UL 61010-2-201 (IEC 61010-2-201:2013) 5 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL PREFACE This UL Standard is based on IEC Publication 61010-2-201: rst edition, Safe

28、ty Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use Part 2-201: Particular Requirements for Control Equipment. IEC publication 61010-2-201 is copyrighted by the IEC. This UL Standard 61010-2-201 Standard for Safety Requirements for Electrical Equipment for Measureme

29、nt, Control, and Laboratory use Part 2-201: Particular Requirements for Control Equipment, is to be used in conjunction with the third edition of UL 61010-1. The requirements for control equipment are contained in this Part 2 Standard and UL 61010-1. Requirements of this Part 2 Standard, where state

30、d, amend the requirements of UL 61010-1. Where a particular subclause of UL 61010-1 is not mentioned in UL 61010-2-201, the UL 61010-1 subclause applies. The text, gures and tables of IEC Publication Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use Part 2-201

31、: Particular Requirements for Control Equipment, IEC 61010-2-201, copyright February 2013, are used in this Standard with the consent of the IEC and the American National Standards Institute (ANSI). The IEC copyrighted material has been reproduced with permission from ANSI. ANSI should be contacted

32、regarding the reproduction of any portion of the IEC material. The IEC Foreword and Introduction are not a part of the requirements of this Standard but are included for information purposes only. Copies of IEC Publication 61010-2-201 may be purchased from ANSI, 11 West 42nd Street, New York, New Yo

33、rk, 10036, (212) 642-4900. Note Although the intended primary application of this Standard is stated in its Scope, it is important to note that it remains the responsibility of the users of the Standard to judge its suitability for their particular purpose. UL Effective Date The effective date for U

34、L 61010-2-201 (IEC 61010-2-201:2013), First edition is January 24, 2014. A UL effective date is one established by Underwriters Laboratories Inc. and is not part of the ANSI approved standard. JANUARY 24, 2014 UL 61010-2-201 (IEC 61010-2-201:2013) 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER

35、REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL INTERNATIONAL ELECTROTECHNICAL COMMISSION SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE Part 2-201: Particular requirements for control equipment FOREWORD 1) The International Electrotechnical Commiss

36、ion (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic elds. To this end and in ad

37、dition to other activities, IEC publishes International Standards, Technical Specications, Technical Reports, Publicly Available Specications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee intereste

38、d in the subject dealt with may participate in this preparatory work. International, governmental and nongovernmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with co

39、nditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC N

40、ational Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the

41、 way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any

42、IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certication bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity.

43、IEC is not responsible for any services carried out by independent certication bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its

44、 technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any othe

45、r IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the

46、subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61010-2-201 has been prepared by IEC technical committee 65: Industrial-process measurement, control and automation. The text of this standard is based on the followi

47、ng documents: JANUARY 24, 2014 UL 61010-2-201 (IEC 61010-2-201:2013) 7UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL FDIS Report on voting 65/515/FDIS 65/521/RVD Full information on the voting for the approval of this standard can be found

48、in the report on voting indicated in the above table. This Part 2-201 is intended to be used in conjunction with IEC 61010-1. It was established on the basis of the third edition (2010). Consideration may be given to future editions of, or amendments to, IEC 61010-1. This Part 2-201 supplements or m

49、odies the corresponding clauses in IEC 61010-1 so as to convert that publication into the IEC standard: Particular requirements for control equipment. Where a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies as far as is reasonable. Where this part states “addition”, “modication”, “replacement”, or “deletion”, the relevant requirement, test specication or note in Part 1 should be adapted accordingly. This publication has been drafted in accordance with the ISO/IEC