1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULUL 745-4-14Particular Requirements forBattery-Operated PlanersUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT
2、AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULUnderwriters Laboratories Inc. (UL)333 Pfingsten RoadNorthbrook, IL 60062-2096UL Standard for Safety for Particular Requirements for Battery-Operated Planers, UL 745-4-14Second Edition, Dated January 31, 2008Summary of Topi
3、csThis new second edition was issued to clarify the UL effective date statement shown on thePreface page and to make other administrative changes. The technical content of the firstedition has been reproduced verbatim in this edition; the text of the standard has not beenchanged.As noted in the Comm
4、itment for Amendments statement located on the back side of the titlepage, UL and CSA are committed to updating this IEC-based binational standard jointly.However, this second edition dated January 31, 2008 will not be issued by CSA since itaddresses UL only administrative changes.The UL Foreword is
5、 no longer located within the UL Standard. For information concerning the use andapplication of the requirements contained in this Standard, the current version of the UL Foreword islocated on ULStandardsInfoNet at: http:/ master for this Standard at ULs Northbrook Office is the official document in
6、sofar as it relates to aUL service and the compliance of a product with respect to the requirements for that product and service,or if there are questions regarding the accuracy of this Standard.ULs Standards for Safety are copyrighted by UL. Neither a printed copy of a Standard, nor the distributio
7、ndiskette for a Standard-on-Diskette and the file for the Standard on the distribution diskette should bealtered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding thoseStandards shall remain the sole and exclusive property of UL.All rights reserved. No part of thi
8、s publication may be reproduced, stored in a retrieval system, ortransmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwisewithout prior permission of UL.Revisions of UL Standards for Safety are issued from time to time. A UL Standard for Safety is currentonly
9、 if it incorporates the most recently adopted revisions.UL provides this Standard as is without warranty of any kind, either expressed or implied, including butnot limited to, the implied warranties of merchantability or fitness for any purpose.In no event will UL be liable for any special, incident
10、al, consequential, indirect or similar damages,including loss of profits, lost savings, loss of data, or any other damages arising out of the use of or theinability to use this Standard, even if UL or an authorized UL representative has been advised of thepossibility of such damage. In no event shal
11、l ULs liability for any damage ever exceed the price paid forthis Standard, regardless of the form of the claim.JANUARY 31, 2008 UL 745-4-14 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULUL will attempt to answer support requests concerni
12、ng electronic versions of its Standards. However, thissupport service is offered on a reasonable efforts basis only, and UL may not be able to resolve everysupport request. UL supports the electronic versions of its Standards only if they are used under theconditions and operating systems for which
13、it is intended. ULs support policies may change fromtime-to-time without notification.UL reserves the right to change the format, presentation, file types and formats, delivery methods andformats, and the like of both its printed and electronic Standards without prior notice.Purchasers of the electr
14、onic versions of ULs Standards for Safety agree to defend, indemnify, and holdUL harmless from and against any loss, expense, liability, damage, claim, or judgement (includingreasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing anelectronic Standard
15、on the purchasers computer system.If a single-user version electronic Standard was purchased, one copy of this Standard may be stored onthe hard disk of a single personal computer, or on a single LAN file-server or the permanent storagedevice of a multiple-user computer in such a manner that this St
16、andard may only be accessed by one userat a time and for which there is no possibility of multiple concurrent access.If a multiple-user version electronic Standard was purchased, one copy of the Standard may be stored ona single LAN file-server, or on the permanent storage device of a multiple-user
17、computer, or on an Intranetserver. The number of concurrent users shall not exceed the number of users authorized.Electronic Standards are intended for on-line use, such as for viewing the requirements of a Standard,conducting a word search, and the like. Only one copy of the Standard may be printed
18、 from eachsingle-user version of an electronic Standard. Only one copy of the Standard may be printed for eachauthorized user of a multiple-user version of an electronic Standard. Because of differences in thecomputer/software/printer setup used by UL and those of electronic Standards purchasers, th
19、e printedcopy obtained by a purchaser may not look exactly like the on-line screen view or the printed Standard.An employee of an organization purchasing a UL Standard can make a copy of the page or pages beingviewed for their own fair and/or practical internal use.The requirements in this Standard
20、are now in effect, except for those paragraphs, sections, tables, figures,and/or other elements of the Standard having future effective dates as indicated in the preface. The priortext for requirements that have been revised and that have a future effective date are located after theStandard, and ar
21、e preceded by a SUPERSEDED REQUIREMENTS notice.New product submittals made prior to a specified future effective date will be judged under all of therequirements in this Standard including those requirements with a specified future effective date, unlessthe applicant specifically requests that the p
22、roduct be judged under the current requirements. However, ifthe applicant elects this option, it should be noted that compliance with all the requirements in thisStandard will be required as a condition of continued Listing, Recognized and Follow-Up Services afterthe effective date, and understandin
23、g of this should be signified in writing.Copyright 2008 Underwriters Laboratories Inc.This Standard consists of pages dated as shown in the following checklist:Page Date1-8 January 31, 2008JANUARY 31, 2008 UL 745-4-14tr2UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION W
24、ITHOUT PERMISSION FROM ULCanadian Standards AssociationCAN/CSA-C22.2 No. 745-4-14First EditionUnderwriters Laboratories Inc.UL 745-4-14Second EditionParticular Requirements for Battery-Operated PlanersJanuary 31, 2008UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITH
25、OUT PERMISSION FROM ULCommitment for AmendmentsThis Standard is issued jointly by Canadian Standards Association and Underwriters LaboratoriesIncorporated. Amendments to this Standard will be made only after processing according to theStandards writing procedures by both Canadian Standards Associati
26、on and Underwriters LaboratoriesIncorporated.ISSN 0317-5669 1995Canadian Standards AssociationAll rights reserved. No part of this publication may be reproduced in any form whatsoever without theprior permission of the publisher.Copyright 1995, 2008 Underwriters Laboratories Inc.UL COPYRIGHTED MATER
27、IAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULCONTENTSPreface .41 Scope .52 Definitions 53 General requirement 54 General notes on tests 55 Rating .56 Reserved 57 Marking 58 Protection against electric shock 59 Reserved 510 Reserved .511 Heating .512 Reserved .
28、613 Reserved .614 Reserved .615 Electric strength .616 Reserved .617 Abnormal operation 618 Mechanical hazards 619 Mechanical strength 620 Construction .621 Internal wiring .622 Components 623 Supply connection and external flexible cables and cords .624 Reserved .625 Reserved .626 Reserved .627 Cle
29、arances 628 Resistance to heat, fire and tracking .629 Resistance to rusting .730 Reserved .731 Instructions 7Appendix A Thermal cut-outs and overload releasesAppendix B ReservedAppendix C ReservedAppendix D ReservedAppendix E Reference standardsAppendix F Attachments and accessoriesAppendix G Seque
30、nce of testsAppendix H TranslationsJANUARY 31, 2008 CAN/CSA-C22.2 NO. 745-4-14 UL 745-4-14 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULPrefaceThis is the common CSA and UL Standard for Portable Battery-Operated Planerss. It is the first e
31、dition ofCSA Standard C22.2 No. 745-4-14 Safety of portable battery-operated tools Part 4: ParticularRequirements for Planers and the second edition of UL 745-4-14 Safety of portable battery-operated toolsPart 4: Particular Requirements for Planers. It is written in SI (metric) units.This Standard w
32、as prepared by Canadian Standards Association and Underwriters Laboratories Inc. Thiscommon CSA and UL Standard is based on IEC Publication 745-2-14 (1984) Part 2: ParticularRequirements for Planers.Where a particular clause of the general requirements Standard is not mentioned in this Standard, the
33、clause applies as far as is reasonable. Where this edition states addition, modification,orreplacement,the relevant requirement, test specification, or explanatory matter in the general requirements Standardshould be adapted accordingly.If the functions of a tool are covered by different particular
34、Standards, the relevant particular requirementsStandard is applied to each function separately, so far as is reasonable. If applicable, the influence of onefunction on the other is taken into account.This Standard was reviewed by the CSA Subcommittee on Portable Electric Tools of the TechnicalCommit
35、tee on Consumer and Commercial Products under the jurisdiction of the Standards SteeringCommittee on the Canadian Electrical Code, Part II, and was formally approved by these Committees.This Standard was processed and reviewed in accordance with the method of development, revision andimplementation
36、of UL Standards for safety.This Standard has been approved by the Standards Council of Canada as a National Standard of Canada.March 23, 1995UL Effective DateThe effective date for UL 745-4-14 is the date of publication.Revisions of this Standard will be made by issuing revised or additional pages b
37、earing their date of issue.A UL Standard is current only if it incorporates the most recently adopted revisions, all of which areitemized on the transmittal notice that accompanies the latest set of revised requirements. Comments orproposals for revisions on any part of the Standard may be submitted
38、 to UL at any time. Proposals shouldbe submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System(CSDS) at http:/.CSA Effective DateThe effective date for CSA will be announced through a CSA Certification Notice.Note: Although the intended primary application of this
39、Standard is stated in its Scope, it is important to note that itremains the responsibility of the users of the Standard to judge its suitability for their particular purpose.JANUARY 31, 2008CAN/CSA-C22.2 NO. 745-4-14 UL 745-4-144UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTR
40、IBUTION WITHOUT PERMISSION FROM UL1 ScopeThis clause of Part 3 is applicable, except as follows:1.1 Replacement:The term tool is replaced with planers.2 DefinitionsThis clause of Part 3 is applicable.3 General requirementThis clause of Part 3 is applicable.4 General notes on testsThis clause of Part
41、 3 is applicable.5 RatingThis clause of Part 3 is applicable.6 Reserved7 MarkingThis clause of Part 3 is applicable except as follows:7.1 Addition:Planers shall, in addition, have the following markings: indication of rotation of the working spindle by an arrow raised or sunk or by other means no le
42、ss visibleand indelible.8 Protection against electric shockThis clause of Part 3 is not applicable.9 Reserved10 Reserved11 HeatingThis clause of Part 3 is applicable.JANUARY 31, 2008 CAN/CSA-C22.2 NO. 745-4-14 UL 745-4-14 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTIO
43、N WITHOUT PERMISSION FROM UL12 Reserved13 Reserved14 Reserved15 Electric strengthThis clause of Part 3 is applicable.16 Reserved17 Abnormal operationThis clause of Part 3 is applicable.18 Mechanical hazardsThis clause of Part 3 is applicable.19 Mechanical strengthThis clause of Part 3 is applicable.
44、20 ConstructionThis clause of Part 3 is applicable.21 Internal wiringThis clause of Part 3 is applicable.22 ComponentsThis clause of Part 3 is applicable.23 Supply connection and external flexible cables and cordsThis clause of Part 3 is applicable.24 Reserved25 Reserved26 Reserved27 ClearancesThis
45、clause of Part 3 is applicable.28 Resistance to heat, fire and trackingThis clause of Part 3 is applicable.JANUARY 31, 2008CAN/CSA-C22.2 NO. 745-4-14 UL 745-4-146UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM UL29 Resistance to rustingThis clau
46、se of Part 3 is applicable.30 Reserved31 InstructionsThis clause of Part 3 is applicable.Appendix A Thermal cut-outs and overload releasesThis appendix of Part 3 is applicable.Appendix B ReservedThis appendix of Part 3 is applicable.Appendix C ReservedThis appendix of Part 3 is applicable.Appendix D
47、 ReservedThis appendix of Part 3 is applicable.Appendix E Reference standardsThis appendix of Part 3 is applicable.Appendix F Attachments and accessoriesThis appendix of Part 3 is applicable.Appendix G Sequence of testsThis appendix of Part 3 is applicable.JANUARY 31, 2008 CAN/CSA-C22.2 NO. 745-4-14 UL 745-4-14 7UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULAppendix H TranslationsThis appendix of Part 3 is applicable.JANUARY 31, 2008CAN/CSA-C22.2 NO. 745-4-14 UL 745-4-148
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1