UL 916-2015 UL Standard for Safety Energy Management Equipment (Fifth Edition)《能源管理设备》.pdf

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 916 Energy Management EquipmentUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER RE

2、PRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Energy Management Equipment, UL 916 Fifth Edition, Dated October 22, 2015 Summary of Topics: This new edition of UL 916 includes the following: Requirements for Plenum Use in Paragraphs 1.5, 7.6.13, and 72.21 Requiremen

3、ts for Products with E-Ballast Ratings of 347 Vac in Paragraphs 51.1 and 51.3; Figure 51.1, and Tables 51.1 and 51.2 Requirements for Products with E-Ballast Ratings Greater Than 347 Vac in Paragraphs 51.5 and 51.6 The requirements are substantially in accordance with Proposal(s) on this subject dat

4、ed August 20, 2015. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL provides this Standard as is without warranty

5、 of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of prots, lost savings, loss of data, or

6、any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of

7、the claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is

8、 storing an electronic Standard on the purchasers computer system. OCTOBER 22, 2015 UL 916 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL OCTOBER 22, 2015 UL 916 tr2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER

9、REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL OCTOBER 22, 2015 1 UL 916 Standard for Energy Management Equipment First Edition August, 1984 Second Edition April, 1994 Third Edition December, 1998 Fourth Edition December, 2007 Fifth Edition October 22, 2015 This UL Standard for Safety consi

10、sts of the Fifth Edition. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at http:/. ULs Standards for Safety are copyrighted by U

11、L. Neither a printed nor electronic copy of a Standard should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. COPYRIGHT 2015 UNDERWRITERS LABORATORIES INC.UL COPYRIGHTED MATERIAL NOT

12、AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL OCTOBER 22, 2015 ENERGY MANAGEMENT EQUIPMENT - UL 916 2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS INTRODUCTION 1 Scope .8 2 Com

13、ponents 8 3 Units of Measurement .9 4 Undated References 9 5 Glossary .9 CONSTRUCTION 6 General .11 7 Frame and Enclosure 12 7.1 General 12 7.2 Covers .12 7.3 Transformers .15 7.4 Cast metal 15 7.5 Sheet metal 16 7.6 Nonmetallic .18 7.7 Windows .19 7.8 Raintight and rainproof enclosures .20 8 Openin

14、gs in Enclosures 20 8.1 Ventilating openings .20 8.2 Other openings .22 8.3 Screens and expanded metal .24 8.4 Wire openings 24 9 Mounting 26 10 Mechanical Assembly .26 11 Operating Mechanism .27 12 Accessibility of Uninsulated Live Parts, Film-Coated Wire, and Moving Parts .27 13 Protection Against

15、 Corrosion .32 14 Insulating Materials .35 15 Field Connections .36 15.1 General .36 15.2 Equipment permanently connected electrically .36 15.3 Terminals .38 15.4 Outlet-box-mounted devices .39 15.5 Portable equipment .40 15.6 Stationary equipment .40 15.7 Polarity .40 15.8 Strain relief 41 15.9 Bus

16、hings 41 16 Current-Carrying Parts 42 17 Switches .42 18 Internal Wiring 42 18.1 General .42 18.2 Interconnecting cords and cables 46 18.3 Interconnection of units .47 19 Grounding .47 19.1 General .47 19.2 Grounding means 48 OCTOBER 22, 2015 ENERGY MANAGEMENT EQUIPMENT - UL 916 3UL COPYRIGHTED MATE

17、RIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 19.3 Terminals and leads 48 20 Bonding of Internal Parts 50 20.1 General .50 20.2 Construction and connection .51 21 Motors .53 22 Printed Wiring Boards .54 23 Transformers .54 24 Capacitors .54 24.1 General .54

18、24.2 Signal coupling capacitors .55 25 Fuseholders 55 26 Overcurrent Protection, Control-Circuit Conductors 55 27 Overload Relays, Thermal Protectors for Motors, and Impedance-Protected Motors .57 28 Coil Windings 57 29 Spacings 57 29.1 General .57 29.2 Line-voltage circuits 59 29.3 Magnet-coil wind

19、ings .61 29.4 Low-voltage class 2 circuits 61 29.5 Isolated limited secondary circuits (100-volt-amperes or less) 62 29.6 Controlled environment circuits .63 30 Clearances and Creepage Distances 65 31 Controlled-Environment Secondary Circuits 67 32 Wiring Space .68 33 Separation of Circuits .69 34 I

20、solation Devices .72 35 Connections to Separate Equipment 73 35.1 General .73 35.2 Fuel-control circuit 73 35.3 Circulator or auxiliary-control circuit .74 36 Interconnection of Class 2 Circuits 74 37 Barriers 74 PROTECTION AGAINST INJURY TO PERSONS 38 General 75 38.1 Scope 75 38.2 Sharp corners and

21、 edges .75 38.3 Moving parts .75 38.4 Enclosures and guards .75 38.5 Surface temperatures .76 38.6 Mounting devices 76 38.7 Strength of parts .77 39 Protection of Users and Service Personnel 78 39.1 General 78 39.2 Mechanical servicing 79 39.3 Electrical servicing 80 PERFORMANCE 40 General 81 41 Pow

22、er Input Test .82 42 Temperature Test .82 OCTOBER 22, 2015 ENERGY MANAGEMENT EQUIPMENT - UL 916 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 43 Overvoltage and Undervoltage Tests 87 44 Leakage Current Test .88 45 Leakage Current Test Fol

23、lowing Humidity Conditioning 91 46 Normal Operation Test 91 47 Abnormal Operation Test 91 47.1 General .91 47.2 Rectier capacitor combinations 92 47.3 Feedback sensing devices 92 47.4 Isolation devices .92 47.5 Abnormal switching test .93 48 Component Breakdown Test .94 48.1 Effects on equipment .94

24、 48.2 Effects on controlled load .94 49 Overload Test 95 49.1 General .95 49.2 Tungsten-lament-lamp load characteristics .99 50 Endurance Test .101 51 Electronic Ballast, CFLs and LED Driver Rated Controls .103 52 Dielectric Voltage-Withstand Test 107 52.1 General 107 52.2 Secondary circuits (contro

25、lled environment) 108 52.3 Power transformers 109 52.4 Induced potential (crossover lead) .109 52.5 Induced potential repeated 109 52.6 Dead-case-mounted semiconductors 110 53 Volt-Ampere Capacity 110 54 Burnout Test 111 55 Limited Short-Circuit Test .111 55.1 General 111 55.2 Test circuit .113 56 C

26、onductor Short-Circuit Test 114 57 Strain Relief and Flexing Test .114 57.1 Strain relief .114 57.2 Flexing .115 58 Accelerated Aging Tests 115 58.1 General 115 58.2 Gaskets 115 58.3 Sealing compound 116 58.4 Adhesives 117 59 Metallic Coating Thickness Test .117 60 Rain Test .119 61 Conduit Entries

27、Strength Test .122 61.1 Polymeric enclosures 122 61.2 Metallic enclosures 123 62 Cover Retention Test 123 63 Bonding Conductor Tests .124 63.1 Overload withstand test 124 63.2 Resistance test .125 64 Glass Window Impact Test .125 65 Permanence of Marking 125 66 Component Evaluation .126 67 Isolating

28、 Resistor Evaluation 127 OCTOBER 22, 2015 ENERGY MANAGEMENT EQUIPMENT - UL 916 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL MANUFACTURING AND PRODUCTION TESTS 68 Electronic Controls Requiring a Critical Component Evaluation 127 69 Produc

29、tion-Line Dielectric Voltage-Withstand Test .127 69.1 General 127 69.2 Dead-case-mounted semiconductors 129 70 Production-Line Grounding-Continuity Test .129 RATINGS 71 Details .129 MARKINGS 72 General 131 73 Wiring 134 74 Elevated Air Temperature .137 75 Cautionary Markings .138 76 Instructions .13

30、9 ACCESSORY EQUIPMENT 77 General 140 78 Construction 140 79 Performance 141 80 Markings .141 POLYMERIC MATERIALS 81 General 141 82 Flammability of Enclosure 5-Inch Flame 142 83 Thermal Aging 145 84 Exposure to Ultraviolet Light Test 145 85 Water Exposure and Immersion Test .146 86 Volume Resistivity

31、 Test .147 87 Resistance to Hot-Wire Ignition Test .147 88 Heat-Deection Temperature Test .147 89 Resistance to Impact Test 148 90 Resistance to Crushing Test 148 91 Mold-Stress Evaluation .149 92 Dielectric Strength Test .150 93 Knockout Test .150 94 Abnormal Operation Test .150 95 Resistance to Ig

32、nition Test 150 96 Creep and Overcurrent Test 151 SUPPLEMENT SA - SAFETY OF SMART ENABLED ENERGY MANAGEMENT EQUIPMENT SA1 Scope SA1 SA2 General SA1 SA3 Functional Safety SA3 OCTOBER 22, 2015 ENERGY MANAGEMENT EQUIPMENT - UL 916 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DIST

33、RIBUTION WITHOUT PERMISSION FROM UL SA4 Resistance to Electro Magnetic Phenomena (Immunity) SA3 SA5 Markings and Instructions .SA3 APPENDIX A Standards for ComponentsA1 OCTOBER 22, 2015 ENERGY MANAGEMENT EQUIPMENT - UL 916 7UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUT

34、ION WITHOUT PERMISSION FROM UL INTRODUCTION 1 Scope 1.1 These requirements cover energy management equipment and associated sensing devices rated 600 volts or less and intended for installation in accordance with the National Electrical Code, NFPA 70. 1.2 This equipment energizes or de-energizes ele

35、ctrical loads to achieve a desired use of electrical power. The equipment is intended to control electrical loads by responding to sensors or transducers monitoring power consumption, by sequencing, by cycling the loads through the use of preprogrammed data logic circuits, or any combination thereof

36、. Devices responding to signals from a utility company may receive the signals over the power lines or as radio signals. 1.3 These requirements also cover equipment intended for connection only to a low-voltage circuit of limited power supplied by a Class 2 transformer. 1.4 These requirements do not

37、 cover switching devices operated by a mechanical or electromechanical clock mechanism to energize or de-energize loads. These requirements do cover electronic clock operated energy management equipment. 1.5 Controls intended to be installed in air handling spaces or in other environmental air space

38、 (plenums) are covered under the scope of this standard. 2 Components 2.1 Except as indicated in 2.2, a component of a product covered by this standard shall comply with the requirements for that component. See Appendix A for a list of standards covering components used in the products covered by th

39、is standard. 2.2 A component is not required to comply with a specic requirement that: a) Involves a feature or characteristic not required in the application of the component in the product covered by this standard, or b) Is superseded by a requirement in this standard. 2.3 A component shall be use

40、d in accordance with its rating established for the intended conditions of use. 2.4 Specic components are incomplete in construction features or restricted in performance capabilities. Such components are intended for use only under limited conditions, such as certain temperatures not exceeding spec

41、ied limits, and shall be used only under those specic conditions. OCTOBER 22, 2015 ENERGY MANAGEMENT EQUIPMENT - UL 916 8UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 3 Units of Measurement 3.1 When a value for measurement is followed by a

42、 value in other units in parentheses, the rst stated value is the requirement. 3.2 Unless otherwise indicated, all voltage and current values mentioned in this standard are root-mean-square (rms). 4 Undated References 4.1 Any undated reference to a code or standard appearing in the requirements of t

43、his standard shall be interpreted as referring to the latest edition of that code or standard. 5 Glossary 5.1 For the purpose of this standard the following denitions apply. 5.2 CLASS 2 SYSTEM A circuit, transformer, or power source having energy- and voltage-limiting characteristics as described in

44、 the National Electrical Code, ANSI/NFPA 70. 5.3 CONTROLLED ENVIRONMENT An environment relatively free of contaminants. A controlled environment may also be provided by means of a totally closed, gasketed enclosure or the equivalent. 5.4 DEAD-CASE-MOUNTED SEMICONDUCTOR A semiconductor, such as a tri

45、ac or silicon-controlled rectier, employing an integral metal tab or stud that is insulated from live parts. 5.5 FIELD-WIRING TERMINAL A wiring terminal on permanently-connected equipment to which supply connections are made when the equipment is installed in the eld. 5.6 ISOLATED LIMITED-ENERGY LOW

46、-VOLTAGE CIRCUIT A circuit (also hereafter referred to as a low-voltage circuit) involving a potential of not more than 42.4 volts peak supplied by one of the following: a) An energy-limiting Class 2 transformer; b) A non-energy-limiting Class 2 transformer and an overcurrent protective device. The

47、protective device is: 1) Not to be of the automatic reclosing type; 2) To be trip-free from the reclosing mechanism; and 3) Not to be readily interchangeable with a device of a different rating; c) A combination of an isolated transformer secondary winding and a xed impedance that complies with all

48、the performance requirements for an energy-limiting Class 2 transformer or power source; d) A dry-cell battery having output characteristics not greater than those of an energy-limiting Class 2 transformer or power source; or e) A combination of a rechargeable battery and a xed impedance that compli

49、es with all of the performance requirements for an energy-limiting Class 2 transformer or power source. OCTOBER 22, 2015 ENERGY MANAGEMENT EQUIPMENT - UL 916 9UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 5.7 ISOLATED LIMITED-ENERGY SECONDARY CIRCUIT A circuit derived from an isolated secondary winding of a transformer having a maximum capacity of 100 volt-amperes and an open-circuit secondary-voltage rating not exceeding 1000 volts. 5.8 IS