UL SUBJECT 2563-2007 OUTLINE OF INVESTIGATION FOR HEAT RESISTANT WIRE (Issue 1)《耐热电缆调查大纲 发布编号 1》.pdf

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULAugust 14, 20071SUBJECT 2563OUTLINE OF INVESTIGATIONFORHEAT RESISTANT WIREIssue Number: 1AUGUST 14, 2007Summary of TopicsThis outline is being issued to state the product description, ratings, an

2、dtest program for heat resistant wire.The UL Foreword is no longer located within the UL Standard. For informationconcerning the use and application of the requirements contained in thisStandard, the current version of the UL Foreword is located onULStandardsInfoNet at: http:/ 2007 UNDERWRITERS LABO

3、RATORIES INC.UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULAUGUST 14, 2007SUBJECT 25632No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULCONTENTSGENERAL1 Scope .42 Un

4、its of Measurement .4CONSTRUCTION3 Materials and Workmanship 44 Assembly 44.1 General .44.2 Conductors 44.3 Insulation and covering 4PERFORMANCE5 General 5MARKING6 On the Wire 57 Tag, Reel, or Carton Markings 5AUGUST 14, 2007 SUBJECT 2563 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCT

5、ION ORDISTRIBUTION WITHOUT PERMISSION FROM ULGENERAL1 Scope1.1 These requirements cover single and multiple conductor wires intended for use in dry locations ininfra red ovens and similar other high temperature applications. The wire is rated 300 or 600 V and 105,150, 200, 250, 350, or 450C.1.2 Thes

6、e requirements do not cover wiring for appliances or other devices covered under the Standardfor Appliance Wiring Material, UL 758.2 Units of Measurement2.1 In addition to being stated in the inch/pound units that are customary in the USA, each of therequirements in this outline is also stated in un

7、its that make the requirement conveniently usable incountries employing the various metric systems (practical SI and customary). Equivalent although notnecessarily exactly identical results are to be expected from applying a requirement in USA or metricterms. Equipment calibrated in metric units is

8、to be used when a requirement is applied in metric terms.CONSTRUCTION3 Materials and Workmanship3.1 Only materials that are acceptable for the particular use shall be employed in a wire. Wires shall bemade and finished with the degree of uniformity and grade of workmanship that are practicable in aw

9、ell-equipped factory.3.2 Each material used in a wire shall be compatible with all of the other materials used in the wire.4 Assembly4.1 General4.1.1 These constructions consist of a single conductor, two insulated conductors laid parallel or 2 to 50conductors cabled together.4.1.2 Multi-conductor,

10、round constructions consist of single insulated conductors twisted together with anoverall covering consisting of mica tape and braid.4.2 Conductors4.2.1 The conductor shall comply with the requirements in Conductor in the Standard for Appliance WiringMaterial, UL 758.4.3 Insulation and covering4.3.

11、1 Insulation consists of any combination of a floropolymer, kapton or mica tapes and glass braid. Atape layer shall be in contact with the conductor. The required outer covering shall be a glass braid andmay be impregnated with a floropolymer or silicone coating.AUGUST 14, 2007SUBJECT 25634UL COPYRI

12、GHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULPERFORMANCE5 General5.1 Heat Resistant wires shall comply with the tests as described in the table for Single conductor withother-than-extruded insulation in the Standard for Appliance Wiring Material, UL

13、 758.MARKING6 On the Wire6.1 Heat resistant wire shall be marked with the name of the wire manufacturer, that manufacturers tradename for the wire or both, or any other acceptable distinctive marking by means of which the organizationresponsible for the wire can readily be identified.7 Tag, Reel, or

14、 Carton Markings7.1 A tag on which the following information is indicated plainly shall be tied to every shipping length offinished wire. However, if the wire is wound on a reel or coiled in a carton, the tag may be glued, tied,stapled, or otherwise acceptably attached to the reel or carton instead

15、of to the wire, or the tag may beeliminated and the information printed or stencilled directly onto the reel or carton. Other information maybe added if it does not confuse or mislead.a) Identification as indicated in 5.1 of the organization that is responsible for the wire.b) Maximum voltage rating

16、c) The date of manufacture by month and yeard) Conductor AWG sizee) Heat Resistant Wiref) The maximum temperature ratingg) Catalog numberAUGUST 14, 2007 SUBJECT 2563 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULAUGUST 14, 2007SUBJECT 25636No Text on This Page