UL SUBJECT 2853-2013 Outline of Investigation for Sustainability for Mobile Hotspots (Issue 1)《移动热点可持续发展的调查大纲 (议题1)》.pdf

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULAugust 27, 20131UL 2853Outline of Investigation for Sustainability for Mobile HotspotsISSUE NO: 1August 27, 2013Summary of TopicsThis first issue of the Outline of Investigation for Sustainabilit

2、y for MobileHotspots, Subject 2853, is to establish multiple attribute sustainabilitycriteria for Mobile Hotspots, including the packaging and all componentsshipped in the box with the Mobile Hotspot. Separate requirements for theMobile Hotspot, external power supply, cables and other accessoriesshi

3、pped in the box are included.Subject to these terms and conditions and those in any other agreementsbetween you and Underwriters Laboratories Inc. (UL) and/or theirrepresentatives, you are hereby granted a limited, non-exclusive,non-transferable license to use the outline solely for your internal,no

4、n-commercial business purposes, The outline is not being sold, and other thanthe limited license granted herein UL retains all rights, title and interest (includingexclusive ownership) in the outline and all copyright therein. UL reserves the rightto regain possession of the outline from you at any

5、time. When no longer needed,you agree to destroy the outline (if in hardcopy form) or delete and purge theoutline from your files (if in electronic form). No part of the outline may bereproduced, modified, stored in a retrieval system, or transmitted in any form byany means, whether electronic, mech

6、anical photocopying, recording, or otherwisewithout prior written permission of UL. You further agree not to create anyderivative works from the outline or remove or alter any copyright or otherproprietary notices in the outline. The limited license to use the Standard shallautomatically terminate u

7、pon your breach of any of the terms and conditionsherein or any other agreement between you and UL and/or their representatives.UL provides this outline as is without warranty of any kind, either expressed orimplied, including but not limited to, the implied warranties of merchantability orfitness f

8、or any purpose.In no event will UL or any of their affiliates be liable for any special, incidental,consequential, indirect or similar damages, including loss of profits, lost savings,loss of data, or any other damages arising out of the use of or the inability to usethis outline, even if UL or thei

9、r authorized representative has been advised of thepossibility of such damage. In no event shall ULs liability for any damage everexceed the price paid for the license to use this outline, regardless of the form ofthe claim.UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTI

10、ON WITHOUT PERMISSION FROM ULUsers of the electronic versions of ULs outline agree to defend, indemnify, andhold ULI, their affiliates and each of their respective trustees, officers, employees,agents and representatives harmless from and against any loss, expense,liability, damage, claim, or judgme

11、nt (including reasonable attorneys fees)resulting from any error or deviation introduced while purchaser is storing anelectronic outline on the purchasers computer system.COPYRIGHT 2013 UNDERWRITERS LABORATORIES INC.UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHO

12、UT PERMISSION FROM ULCONTENTSINTRODUCTION1 General 52 Scope .53 Units of Measurement .64 Undated References 65 Glossary .66 Evaluation and Assessment Criteria .86.1 General .86.2 Levels of achievement 8MATERIALS7 Supply Chain Management of Materials .98 Sustainable Use of Raw Materials .108.1 Plasti

13、cs 109 ENERGY USE REQUIREMENTS .11HEALTH AND ENVIRONMENT10 Substances of Concern 1211 Dermal Contact Assessment .1412 Life Cycle Assessment 1412.1 Conducting a Life Cycle Assessment .14END OF LIFE MANAGEMENT AND EXTENSION OF USEFUL LIFE13 End of Life Management .15PACKAGING14 Packaging .17MANUFACTUR

14、ING AND OPERATIONS15 Corporate Sustainability (CS) .1916 Environmental Health and Safety (EHS) Policies .2017 Supply Chain Impacts .20INNOVATION18 General 20APPENDIX AAPPENDIX BB1 Materials Inventory .B1AUGUST 27, 2013 UL 2853 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRI

15、BUTION WITHOUT PERMISSION FROM ULAPPENDIX CC1 External References C1APPENDIX D (Informative)HEALTH AND ENVIRONMENTAD10 Substances of Concern .D1AD10.9 Required Textile leather accessories shall meet the following criteria. D1INNOVATIONAD18 General D2AUGUST 27, 2013UL 28534UL COPYRIGHTED MATERIAL NOT

16、 AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULINTRODUCTION1 General1.1 The manufacture and use of electronics creates an environmental burden that these requirements areintended to improve. When these requirements were first created, defining the sustainability of mob

17、ilehotspots was not compiled into a single set of criteria. These requirements aspire to address these issuesfor mobile hotspots.1.2 The impacts of extraction through production and ultimate disposal are often left to a broad sweepingstatement of sustainability without a true definition of what that

18、 means. There are various alternativeconstructions, materials, manufacturing practices and even disposal options that can minimizeenvironmental burdens.1.3 These requirements provide a life cycle and human health based approach to setting the criteria tobe achieved. These requirements reflect the ma

19、jor areas of impact and provide a criteria structure that willallow manufactures to demonstrate that any product meeting these requirements has made significantgains towards becoming sustainable.2 Scope2.1 These requirements establish multiple attribute sustainability criteria for mobile hotspots, i

20、ncluding thepackaging and all components shipped in the box with the mobile hotspot. Separate requirements for thedevice providing hotspot services, external power supply, cables and other accessories shipped in the boxare included. Mobile hotspots are defined as a portable device which connects to

21、a cellular telephonenetwork and provides local WiFi services.2.2 These requirements apply to products that are or will be available for purchase at the time ofcertification.2.3 The criteria in these requirements were developed based on the life cycle stages of mobile hotspotsand similar electronics.

22、 Sustainability factors considered in these requirements are: materials, packaging,manufacturing and operations, energy efficiency of the external power supply, health and environment,and end of life management.AUGUST 27, 2013 UL 2853 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION

23、ORDISTRIBUTION WITHOUT PERMISSION FROM UL3 Units of Measurement3.1 For the purposes of these requirements, values shall be reported in accordance with the requirementsof the specific criteria and shall be in metric units. If a manufacturers choice of units deviates, that changeshall be documented an

24、d justified as to the reason and relevance for that change.4 Undated References4.1 Any undated reference to a code or standard appearing in these requirements shall be interpreted asreferring to the latest edition of that code or standard. The exception shall be in the case where thecriterion explic

25、itly states a certain version or date to be used.5 Glossary5.1 For the purpose of these requirements, the following definitions apply.5.2 ALTERNATIVE RESOURCES Resources other than raw or virgin material, including but notlimited to bio-based materials, rapidly renewable materials, recycled/reclaime

26、d content.5.3 BIO-BASED CARBON Carbon materials that are derived in whole or part from biomassresources. Biomass resources are organic materials that are available on a renewable or recurringbasis such as crop residues, wood residues, grasses, and aquatic plants.5.4 CHEMICAL ABSTRACT SERVICES (CAS)

27、NUMBER A unique numerical identifier assigned toevery chemical by the CAS division of the American Chemistry Council.5.5 CONFLICT ZONES Regions which are characterized by conditions of armed conflict and humanrights abuses, and receive funding from the revenue of militia-controlled mines.5.6 ENVIRON

28、MENTAL MANAGEMENT SYSTEM (EMS) Part of an organizations managementsystem used to develop and implement its environmental policy and manage its environmental aspects.(Reprinted from Environmental management Vocabulary, ISO 14050)5.7 EUROPEAN UNION (EU) HAZARD CLASSIFICATION The EUs system of classifi

29、cation,labeling and packaging chemical substances and mixtures. The Classification, Labeling and Packaging(CLP) Regulation incorporates the classification criteria and labeling rules agreed upon at the UnitedNations level in the Globally Harmonized System of Classification and Labeling of Chemicals

30、(GHS).5.8 EUTROPHICATION The process whereby a body of water receives excess nutrients thatstimulate excess plant growth, usually resulting in the depletion of dissolved oxygen.5.9 GLOBAL WARMING The sustained increase of the average temperature of the earthsatmosphere, resulting in climatic change,

31、 due to the increased emission of greenhouse gases.5.10 GLOBAL REPORTING INITIATIVE (GRI) A sustainability reporting framework that can be usedto measure and report on the economic, environmental, and social performance of an organization.5.11 HAZARDOUS MATERIAL IDENTIFICATION SYSTEM (HMIS) A numeri

32、cal hazard ratingdeveloped by the National Paint includes substances subject to existing use restrictions which might be insufficient toinsure maximum protection of human health and the environment. The candidate list of SVHC can befound at http:/echa.europa.eu/chem_data/authorisation_process/candid

33、ate_list_table_en.aspElectric Power Research InstituteTest Method for Calculating the Energy Efficiency of Single-Voltage External Ac-Dc and Ac-Ac PowerSupplies, Aug., 2004, http:/www.efficientpowersupplies.org/pages/External_Power_Supply_Efficiency_Test_Method_8-11-04.pdfENEN 1811, Reference test m

34、ethod for release of nickel from products intended to come into direct andprolonged contact with the skinEN 12472, Method for the simulation of wear and corrosion for the detection of nickel release from coateditemsAUGUST 27, 2013 UL 2853 C1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUC

35、TION ORDISTRIBUTION WITHOUT PERMISSION FROM ULEPAResponsible Recycling (R2) Practices, http:/www.epa.gov/osw/conserve/materials/ecycling/r2practices.htmFederal Trade CommissionGuides for the Use of Environmental Marketing Claims, 16 CFR Part 260, http:/www.ftc.gov/bcp/grnrule/guides980427.htmForest

36、Stewardship CouncilFSC, http:/www.fscus.org/GRIGlobal Reporting Initiative, http:/www.globalreporting.org/IEChttp:/www.iec.chIEC 61249-2-21, Materials for printed boards and other interconnecting structures - Part 2-21: ReinforcedBase Materials, Clad and Unclad - Non-halogenated Epoxide woven E-glas

37、s reinforced laminated sheetsof defined flammability (vertical burning test), copper-cladIEC 62321, Electrotechnical products - Determination of levels of six regulated substances (lead, mercury,cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers)ISOhttp:/www.iso.o

38、rgISO 14001, Environmental management systems - Requirements with guidance for useISO 14021, Environmental labels and declarations - Self-declared environmental claims (Type IIenvironmental labeling)ISO 14040 and ISO 14044, Environmental Management Life Cycle Assessment PackageISO 14050, Environment

39、al management - VocabularyISO 14064-1, Greenhouse gases - Part 1: Specification with guidance at the organization level forquantification and reporting of greenhouse gas emissions and removalsISO 17353, Water quality - Determination of selected organotin compounds - Gas chromatographicmethodNFPAhttp

40、:/www.nfpa.orgNFPA 704, Standard System for the Identification of Hazards of Materials for Emergency ResponseAUGUST 27, 2013UL 2853C2UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULOSHAhttp:/www.osha.gov/UL EnvironmentProcedure for Preparation of a Toxicological Assessment, UL P 113, http:/m- 27, 2013 UL 2853 C3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULAUGUST 27, 2013UL 2853C4No Text on This Page