VA 11 17 36-2011 PACKAGE TRANSFER UNITS.pdf

1、11-11 11 17 36 - 1 SECTION 11 17 36 PACKAGE TRANSFER UNITS SPEC WRITER NOTE: Delete between /_ / if not applicable to project. Also delete any other item or paragraph not applicable in the section and renumber the paragraphs. PART 1 - GENERAL 1.1 DESCRIPTION This section specifies package transfer u

2、nits. 1.2 RELATED WORK A. Windows and frames of a forced entry/ballistic resistant rated: Section 08 56 53, SECURITY WINDOWS B. Glazing and ballistic rated glazing: Section 08 80 00, GLAZING. C. Color and texture of factory finish: Section 09 06 00, SCHEDULE FOR FINISHES. D. Deal trays of a Forced E

3、ntry/Ballistic Resistant rating: Section 08 56 59, SERVICE AND TELLER WINDOW UNITS. E. Guard Booths: Section 13 34 19, METAL BUILDING SYSTEMS. 1.3 SUBMITTAL A. Submit in accordance with Section 01 33 23, SHOP DRAWINGS, PRODUCT DATA AND SAMPLES. B. Shop Drawings: Show material and finish, size of mem

4、bers, and details of construction, installation and anchorage: Package transfer box C. Manufacturers Literature and Data: Package transfer box D. Certificates: Letter from manufacturer indicating the products have been certified to meet the specified ratings. 1.4 DELIVERY Deliver products to site in

5、 sealed packages of containers; labeled for identification with manufacturers name, brand, and contents. 1.5 STORAGE A. Store products in weathertight and dry storage facility. B. Protect from damage from handling, weather and construction operations before, during and after installation in accordan

6、ce with manufacturers instructions. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-11-11 11 17 36 - 2 1.6 PERFORMANCE REQUIREMENTS Fabricate and install Forced Entry/Ballistic Resistant (FE/BR) assemblies to achieve indicated levels of resistance. E

7、xtend resistance to include anchorages, interfaces with adjoining substrates, and hardware. Security attacks shall be unable to penetrate through closed/locked assemblies in manner described; it is recognized that such attacks may damage units beyond repair and reuse, requiring replacement of work b

8、y Government. 1.7 APPLICABLE PUBLICATIONS A. Publications listed below form a part of this specification to extent referenced. Publications are referenced in text by basic designation only. B. American Society for Testing and Materials (ASTM): A167-99(R2009) . Stainless and Heat-Resisting Chromium-N

9、ickel Steel Plate, Sheet, and Strip A1008-10 . Steel, Sheet, Cold-Rolled, Carbon, Structural High Strength Low Alloy B26/B26M-09 Aluminum Alloy Sand Castings B221-08 Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Shapes, and Tubes C. American Society of Mechanical Engineers (ASME): B18.6.4-9

10、8(R2005) Thread Forming and Thread Cutting Tapping Screws D. American Welding Society (AWS): D9.1-06 Sheet Metal Welding Code E. National Association of Architectural Metal Manufacturers (NAAMM) AMP 500-06 . Metal Finishes Manual F. Federal Specifications (Fed. Spec): A-A-1922A Shield, Expansion G.

11、Underwriters Laboratories, Inc. (UL): 752-11 . Bullet-Resisting Equipment. PART 2 - PRODUCTS SPEC WRITER NOTE: Make material requirements agree with applicable requirements specified in the referenced Applicable Publications. 2.1 MATERIALS A. Aluminum: 1. Extruded: ASTM B221, alloy 6063-T5 and alloy

12、 6463-T5. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-11-11 11 17 36 - 3 2. Cast: ASTM B26. B. Stainless Steel: ASTM A167, Type 302B. C. Steel Sheet: ASTM A1008. D. Fasteners: 1. Exposed Fasteners: Stainless steel or chromium plated brass, finish

13、 to match adjacent surface. 2. Concealed Fasteners: Steel, hot-dip galvanized. 3. Screws: ASME B18.6.4. 4. Expansion Shields: A-A-1922A as recommended by manufacturer for component and substrate for use in solid masonry or concrete. 2.2 PRODUCT REQUIREMENTS Products meet, as a minimum, the requireme

14、nts specified, and be a standard commercial product of a manufacturer regularly and presently manufacturing products specified. SPEC WRITER NOTE: Verify details. Show location at Pharmacy or other locations and placement in wall. 2.3 PACKAGE TRANSFER BOX (DETAIL NO. 11022-1.DWG) A. Security prefabri

15、cated type, of size and design shown complete with doors, body and flanges. B. Doors: Steel with steel piano hinges. 1. Mechanical interlocking type that prevents both doors from being opened at same time. 2. Pull handles on patient side, locking handles on Secure side. Bright chromium plated finish

16、 on handles. C. Body of transfer box: Use 5 mm (3/16-inch) thick welded sheet steel with 3 mm (1/8-inch) thick steel fixed outer flanges and adjustable inner flanges. D. Finish paint exposed doors and flanges, in color specified in Section 09 06 00, SCHEDULE FOR FINISHES. 1. AMP 500-505. 2. Manufact

17、urers standard baked-on prime coat on surfaces and baked-on finish coat on exposed interior surfaces of package transfer box. PART 3 - EXECUTION SPEC WRITER NOTE: Edit each of the following paragraphs to suit the items being installed, cleaned and adjusted. Provided by IHSNot for ResaleNo reproducti

18、on or networking permitted without license from IHS-,-,-11-11 11 17 36 - 4 3.1 INSTALLATION A. Install product by experienced mechanics capable of installing item in accordance with drawings, specifications, and shop drawings. B. Set work accurately, in alignment and where shown. Install plumb, leve

19、l, free of rack and twist, and set parallel or perpendicular to required line and plane of surface. C. Provide anchoring devices and fasteners necessary for securing each item to building construction. 1. Do not use power actuated drive pins. 2. Do not anchor to wood ground strips. D. Touch up abrad

20、ed and damaged areas of finish coat with paint furnished by the manufacturer. E. Fit flanges of package transfer box tight against walls. Use shims where required for leveling. 3.2 CLEANING AND ADJUSTING A. After installation, clean items as recommended by the manufacturer and protect from damage un

21、til completion of the project. B. Adjust movable parts including hardware to operate as designed, without binding or deformation of the members, centered in the opening or frame, and where applicable, with contact surfaces fit tight and even, without forcing or warping the components. - - - E N D - - - Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-