BS EN 25077-1994 纺织品.洗涤干燥后尺寸变化测定.pdf

1、BRITISH STANDARD BS EN 25077:1994 ISO 5077:1984 Textiles Determination of dimensional change in washing and drying The European Standard EN25077:1993 has the status of a British Standard UDC 677.017.635:648.23 + 648 33BS EN 25077:1994 This British Standard, having been prepared under the directionof

2、 the Textiles and Clothing Standards Policy Committee, was published underthe authority of the Standards Board and comesintoeffect on 15February1994 BSI 08-1999 The following BSI references relate to the work on this standard: Committee reference TCM/25 Special announcement in BSINews April1993 ISBN

3、 0 580 21829 5 Cooperating organizations The European Committee for Standardization (CEN), under whose supervision this European Standard was prepared, comprises the national standards organizations of the following countries: Austria Oesterreichisches Normungsinstitut Belgium Institut belge de norm

4、alisation Denmark Dansk Standardiseringsraad Finland Suomen Standardisoimisliito, r.y. France Association franaise de normalisation Germany Deutsches Institut fr Normung e.V. Greece Hellenic Organization for Standardization Iceland Technological Institute of Iceland Ireland National Standards Author

5、ity of Ireland Italy Ente Nazionale Italiano di Unificazione Luxembourg Inspection du Travail et des Mines Netherlands Nederlands Normalisatie-instituut Norway Norges Standardiseringsforbund Portugal Instituto Portugus da Qualidade Spain Asociacin Espaola de Normalizacin y Certificacin Sweden Standa

6、rdiseringskommissionen i Sverige Switzerland Association suisse de normalisation United Kingdom British Standards Institution Amendments issued since publication Amd. No. Date CommentsBS EN 25077:1994 BSI 08-1999 i Contents Page Cooperating organizations Inside front cover National foreword ii Forew

7、ord 2 1 Scope and field of application 3 2 References 3 3 Principle 3 4 Apparatus and reagents 3 5 Atmospheric conditions 3 6 Test specimens 3 7 Procedure 3 8 Expression of results 3 9 Test report 4 Annex Confidence limits of the mean 5 Annex ZA (normative) Normative references to international publ

8、ications with their relevant European publications 5 National annex NA (informative) Committees responsible Inside back cover National annex NB (informative) Cross-references Inside back coverBS EN 25077:1994 ii BSI 08-1999 National foreword This British Standard has been prepared under the directio

9、n of the Textiles and Clothing Standards Policy Committee. It is the English language version of EN25077:1993 Textiles Determination of dimensional change in washing and drying published by the European Committee for Standardization and is identical with ISO5077:1984. This standard supersedes BS5807

10、1987 which is withdrawn and which was also identical with ISO5077:1984. As a consequence of implementing the European Standard this British Standard is renumbered as BS EN25077. This edition makes no technical changes to the standard. EN 25077:1993 has been approved by CEN member bodies under the U

11、nique Acceptance Procedure. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pa

12、ges This document comprises a front cover, an inside front cover, pages i and ii, theEN title page, pages 2 to 6, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the

13、inside front cover.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 25077 November1993 UDC 677.017.635:648.23 + 648.33 Descriptors: Textiles, fabrics, garment, washing, drying, tests, dimensional stability tests English version Textiles Determination of dimensional change in washing and drying (

14、ISO5077:1984) Textiles Dtermination des variations dimensionnelles au lavage et au schage domestiques (ISO5077:1984) Textilien Bestimmung der Manderung beim Waschen und Trocknen (ISO5077:1984) This European Standard was approved by CEN on 1993-11-25. CEN members are bound to comply with the CEN/CENE

15、LEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any C

16、EN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN

17、members are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and UnitedKingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europi

18、sches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1993 Copyright reserved to CEN members Ref. No. EN 25077:1993 EEN 25077:1993 BSI 08-1999 2 Foreword This European Standard has been taken over by CEN/TC248, Textiles and textile products, from the work of ISO/TC38, Tex

19、tiles, of the International Organization for Standardization (ISO). This document was submitted to the Unique Acceptance Procedure (UAP) and was approved without any modification. This European Standard shall be given the status of a national standard, either by publication of an identical text or b

20、y endorsement, at the latest by May1994, and conflicting national standards shall be withdrawn at the latest by May1994. In accordance with the CEN/CENELEC Internal Regulations, the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany

21、 Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. NOTENormative references to international publications are listed in Annex ZA (normative).EN 25077:1993 BSI 08-1999 3 1 Scope and field of application This International Stand

22、ard specifies a method for determination of the dimensional change of fabrics, garments or other textile articles when subjected to an appropriate combination of specified washing and drying procedures. In the case of textile articles or deformable materials, it is necessary to exercise all possible

23、 caution in the interpretation of the results. 2 References ISO 139, Textiles Standard atmospheres for conditioning and testing. ISO 3759, Textiles Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change. ISO 6330, Textiles Domestic washin

24、g and drying procedures. 3 Principle The specimen is conditioned in the specified standard atmosphere and measured before subjection to the appropriate washing and drying procedures. After drying, conditioning and remeasuring of the specimen, the changes in dimensions are calculated. 4 Apparatus and

25、 reagents As specified in ISO3759 and in ISO6330. 5 Atmospheric conditions The atmospheric conditions required for pre-conditioning and testing are specified in ISO139. 6 Test specimens 6.1 The selection, dimensions, marking and measuring of test specimens are specified in ISO3759. 6.2 The number of

26、 specimens to be tested is determined by the precision of the results required. In this test method, it is suggested that four specimens of each sample be tested and that these specimens be washed in two separate wash loads with two specimens per wash load (replicates per run). See the Annex. 6.3 In

27、 certain circumstances, it may be desirable not to test four specimens, and fewer specimens may be used. 7 Procedure 7.1 Determine the original length and width dimensions, as appropriate, after the specimens have been pre-conditioned, conditioned and measured according to the procedure specified in

28、 ISO3759. 7.2 Wash and dry the specimens according to one of the procedures specified in ISO6330, as agreed between the interested parties. 7.3 After washing and drying, condition and measure the specimens and calculate the dimensional change of the specimens according to the procedure specified in

29、ISO3759. 8 Expression of results 8.1 Calculate the mean changes in dimensions in both the length and width directions in accordance with the arrangement in ISO3759 as follows: 8.2 Express the average dimensional changes to the nearest 0,5%. Percentage change in length Percentage change in width Fina

30、l length Original length Original length -100 = Final width Original width Original width - 100 EN 25077:1993 4 BSI 08-1999 8.3 State whether the dimension has decreased (shrinkage) by means of a minus sign () or increased (extension) by means of a plus sign (+). 9 Test report The test report shall

31、include the following particulars: a) a statement that the methods adopted for preparation, marking and measuring were in accordance with this International Standard, and details of any additional measurements made; b) information on the test method used, including details of the washing, water remo

32、val and drying procedure, pressing, or other finishing procedure employed, unless this information can be given by a reference to an International Standard; c) the number of specimens washed and dried; d) for fabric specimens, the average dimensional change in the length (warp or wale) and the avera

33、ge dimensional change in the width (weft or course); e) for garments, the description, make and size of the garment tested; f) for garments, an adequate description of each measuring position and the dimensional change at each position for each garment tested.EN 25077:1993 BSI 08-1999 5 Annex Confid

34、ence limits of the mean (Applicable to fabrics only) The following table gives estimates of 95% confidence limits of the mean which can be expected in the mean results of linear percentage dimensional change, when the number of runs and replicates per run vary. Annex ZA (normative) Normative referen

35、ces to international publications with their relevant European publications This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For

36、 dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). Number of runs Number

37、of replicates per run 1 2 3 4 5 10 1 2 3 4 5 10 1,68 1,19 0,97 0,84 0,75 0,53 1,24 0,87 0,71 0,62 0,55 0,39 1,05 0,74 0,61 0,53 0,47 0,33 0,94 0,67 0,54 0,47 0,42 0,30 0,87 0,62 0,50 0,44 0,39 0,28 0,71 0,50 0,41 0,36 0,32 0,22 NOTE 1This table has been worked out from an interlaboratory trial condu

38、cted on behalf of ISO/TC 38/SC 2/WG 3 in1973-1974. The wash programmes used in this trial differed somewhat from the programmes in the test method specified in this International Standard. The confidence limits applicable to this test method may lie somewhat closer together than suggested by the abo

39、ve table, but this can only be determined by another interlaboratory trial. NOTE 2When the dimensional change of a fabric is greater than approximately5% the confidence limits given in the above table may no longer be valid. Publication Year Title EN/HD Year ISO139 Textiles Standard atmospheres for

40、conditioning andtesting EN20139 ISO3759 Textiles Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change ISO6330 Textiles Domestic washing and drying proceduresfortextile testing EN26330 6 blankEN 25077:1993 BSI 08-1999 National annex NA (

41、informative) Committees responsible The United Kingdom participation in the preparation of this European Standard was entrusted by the Textile and Clothing Standards Policy Committee (TCM/) to Technical Committee TCM/25 upon which the following bodies were represented: Association of Consulting Scie

42、ntists Association of Manufacturers of Domestic Electrical Appliances Association of Suppliers to the Furniture Industry Ltd. British Retail Consortium British Textile Confederation Chemical Industries Association Confederation of British Wool Textiles Limited Home Laundering Consultative Council In

43、ternational Wool Secretariat Lambeg Industrial Research Association Mail Order Traders Association Ministry of Defence National Wool Textile Export Corporation Soap and Detergent Industry Association Society of Dyers and Colourists Textile Finishers Association Textile Research Council (FCRA) Nation

44、al annex NB (informative) Cross-references Publication referred to Corresponding British Standard ISO139:1973 BS EN20139:1992 Textiles Standard atmospheres for conditioning and testing ISO6330:1984 BS EN26330:1993 Textiles Domestic washing and drying procedures for textile testingBS EN 25077:1994 BS

45、I 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are up

46、dated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this Britis

47、hStandard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest e

48、ditions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic inf