NASM 20615-2003 rivet, solid-universal head, brass,copper, nickel-copper alloy.pdf

1、NASM 20615-2003 rivet, solid-universal head, brass,copper, nickel-copper alloy_NATIONAL AEROSPACE STANDARD COPYRIGHT 2003 AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA, INC ALL RIGHTS RESERVED NONE FED SUP CLASS NASM20615 RIVET, SOLID-UNIVERSAL HEAD, BRASS, COPPER, NICKEL-COPPER ALLOY SHEET 1OF 3 TWO

2、I21 RECESSED MATERIAI IDENTIFICATION MARKS ON RIVET HEAD WITHIN THE DIAMETRAL LIMITS OF OE 0.030 MAX x ,020 DEEP COPPER NICKEL-COPPER ALLOY a I 5320 c 7 LENGTH +.oi I-B (SEE REOUIREMENT 4) + + RAD T ISEE REQUIREMENT 41 APPROX MATERIAL FOR FULL HEAD R .O10 COPPER ,010-0.20 MONEL OE FLAT RAD R TABLE I

3、. DIMENSIONS REOUIREMENTS: 1. MATERIAL COPPER ASTM 83. (UNS C110001. NICKEL-COPPER ALLOY (MONEL). -N-281, CLASS A, IUNC NO44001 BRASS, 00-W-321, ALLOY 270, 118 HARD IUNS C270001. 2. FI: ONLY WHEN SPECIFIED NICKEL-COPPER ALLOY IMONELI CADMIUM PLATE, oa-P-416. TYPE II, CLASS 2. 3. SHEAR STRENGTH: COPP

4、ER 17,000 PSI TO 30,000 PSI. NICKEL-COPPER ALLOY IMONELI. 49,000 PSI TO 59,000 PSI 4. RIVETS MAY BE FURNISHED PLAIN OR WITH CHAMFERED OR A 20 CHAMFER TO THE S DIMENSION. ENDS WITH A RADIUS TO THE T DIMENSION 5. RIVET SHALL DRIVE COLD SATISFACTORILY WITH A FULL HEAD FREE FROM CRACKS. 6. RIVETS MUST B

5、E TRUE TO FORM, CONCENTRIC AND FREE FROM INJURIOUS SCALE, FINS, SEAMS AND ALL OTHER INJURIOUS DEFECTS, 7. PART NUMBER: THE MS PART NUMBER CONSISTS OF THE MS NUMBER PLUS THE DASH NUMBER FROM TABLE II ADDITIONAL ,031 INCREMENTS MAY BE OBTAINED BY ADDING R AFTER THE LAST DASH NUMBER, EXAMPLE OF PART NU

6、MBER: MS20615-2M = RIVET, UNIVERSAL HEAD, NICKEL COPPER ALLOY, ,0625 INCH DIA, ,500 INCH LONG, MS20615-2MBR = RIVET, UNIVERSAL HEAD NICKEL COPPER ALLOY, ,0625 INCH DIA. ,531 LONG LIST OF CURRENT SHEETS 2 2 I 3 I NEW THE INITIAL RELEASE OF THIS DOCUMENT SUPERSEDES MS20615 REVISION G. PART NUMBERS REM

7、AIN MS20615 I PROCUREMENT SPECIFICATION TITLE CLASSIFICATION I PART STANDARD m O O N h l-i 7 9 o N - O I- o O Y o O O O N W U N m m o w 2 0 E a m m 2 a m 7 3 4 2 W I- a Copyright Aerospace Industries Association of America Inc. Provided by IHS under license with AIA/NASNot for ResaleNo reproduction

8、or networking permitted without license from IHS-,-/:#:#$#:$:*:$#:#NATIONAL AEROSPACE STANDARD Aerospace Industries m Association COPYRIGHT 2001 AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA, INC. ALL RIGHTS RESERVED BRASS DASH NO. -282 NOTES: 1. DIMENSIONS ARE IN INCHES. 2. UNLESS OTHERWISE SPECIFIED

9、, TOLERANCES: DECIMALS f .O1 O. 3. MS20615 CAN UNIVERSALLY REPLACE THE INACTIVATED MS20435 RIVETS OF THE SAME MATERIAL, SHANK DIAMETER, AND LENGTH; BUT THE INACTIVE MS20435 RIVETS CANNOT REPLACE THE SUPERSEDING MS20615 RIVETS. 4. IN THE EVENT OF A CONFLICT BETWEEN THE TEXT OF THIS DOCUMENT AND THE R

10、EFERENCES CITED HEREIN, THE TEXT OF THIS DOCUMENT SHALL TAKE PRECEDENCE. 5. UNLESS OTHERWISE SPECIFIED, ISSUES OF REFERENCED DOCUMENTS ARE THOSE IN EFFECT AT THE TIME OF SOLICITATION. 6. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M-1982. COPPER DASH NO. -2CU2 -483 484 485 486 487 488 489 4610 481 1

11、4812 -4813 4814 481 5 4816 4818 -4820 -584 -585 -586 -587 -588 -589 -5810 -5811 -5812 -581 3 -5814 -581 5 -5816 -283 -284 -285 -286 -287 -288 -289 -383 -384 -385 -386 -387 -388 -389 -3810 -3811 -3812 -4cu4 -4CU5 -4CU6 -4CU7 4CU8 -4CU10 -4CU12 4CU14 -4CU16 -5CU6 -5CU7 -5CUB -5CU10 -5CU12 -5CU14 -5CU1

12、6 -2CU3 -2CU4 -2CU5 -XU6 -2CU7 -2CU8 - NASM20615 SHEET 2 -3cu3 -3cu4 -3cu5 -3CU6 -3cu7 -3CU8 -3CU10 -3CU12 -3CU14 -3CU16 -5818 1 MONEL DASH NO. -2M2 -2M3 -2M4 -2M5 -2M6 -2M7 -2M8 -2M9 -3M2 -3M3 -3M4 -3M5 -3M6 -3M7 -3M8 -3M9 -3M10 -3M11 -3M12 -4MZ -4M3 -4M4 -4M5 -4M6 -4M7 -4M8 -4M9 -4M10 -4M11 -4M12

13、-4M13 -4M 14 -4M15 -4M16 -4M18 -4M20 -5M2 -5M3 -5M4 -5M5 -5M6 -5M7 -5M8 -5M9 -5M10 -5M11 -5M12 -5M13 -5M14 -5M15 -5M16 -5M18 -5M20 -5M22 -5M24 -5M28 -5M32 MONEL :ADMIUM PLATED -2MP2 -2MP3 -2MP4 -2MP5 -2MP6 -2MP7 -2MP8 -2MP9 -3MP2 -3MP3 -3MP4 -3MP5 -3MP6 -3MP7 -3MP8 -3MP9 -3MP10 -3MP11 -3MP12 -3MP14

14、-3MP16 -4MP2 -4MP3 -4MP4 -4MP5 -4MP6 -4MP7 -4MP8 -4MP9 -4MP10 -4MP11 -4MP12 -4MP13 -4MP14 -4MP15 -4MP16 -4MP18 -4MP20 -5MP2 -5MP3 -5MP4 -5MP5 -5MP6 -5MP7 -5MP8 -5MP9 -5MP10 -5MP11 -5MP12 -5MP13 -5MP14 -5MP15 -5MP16 -5MP18 -5MP20 -5MP22 -5MP24 -5MP28 -5MP32 TABLE II. C - DIA - 1/16 3/32 118 - 5/32 -

15、- -ENGTH ,125 ,187 ,250 ,312 ,375 ,438 ,500 562 .125 ,187 .250 ,312 375 .438 ,500 562 ,625 .688 .750 375 1 .o00 ,125 . 1 87 .250 ,312 375 ,438 ,500 .562 .625 ,688 ,750 ,812 ,875 ,938 1 .o00 1.125 1.250 ,125 ,187 ,250 ,312 375 ,438 .500 .562 ,625 .688 ,750 .a1 2 ,875 .938 1 .O00 1.125 1.250 1.375 1.5

16、00 1.750 2.000 - - - ABERC BRASS DASH NO. -684 -685 -686 -687 -688 -689 -6810 -6811 -6812 -6813 -6814 -6815 -6816 -681 8 -6820 -6822 -6824 -6828 -6832 -885 -886 -887 -888 -889 -8810 -881 1 -8812 -8813 -8814 -8815 -8816 -8818 -8820 -8822 -8824 -8828 -8832 -10810 -10812 -10814 -10816 -10820 -10824 -10

17、828 -1 0832 -12812 -12814 -1 2816 -1 2820 -1 2824 -1 2828 -1 2832 -1 481 6 -1 4820 -14824 -14828 -14832 COPPER DASH NO. -6CU6 -6CU7 -6CU8 -6CU10 -6CU12 -6CU14 -6CU16 -6CU18 -6CUZO -6CU22 -6CU24 -8CU5 -8CU6 -8CU7 -8CU8 -8CU9 -8CU10 -8CU11 -8CU12 -8CU13 -8CU14 -8CU1 5 -8CU16 -8CU18 -8CU20 -8CU22 -8CU2

18、4 -8CU28 -8CU32 -1ocu10 -1ocu12 -1OCU14 -1OCU16 -1ocu20 -1OCU24 -1OCU28 -1 OCU32 -12cu12 -12CU14 -12CU16 -1 2cu20 -1 2CU24 -1 XU28 -1 2CU32 -14CU16 -14CU20 -14CU24 -14CU28 -14CU32 MONEL DASH NO. -6M4 -6M5 -6M6 -6M7 -6M8 -6M9 -6M 1 O -6M11 -6M12 -6M13 -6M14 -6M15 -6M16 -6M18 -6M20 -6M22 -6M24 -6M28 -

19、6M32 -8M5 -8M6 -8M7 -8M8 -8M9 -8M10 -8M11 -8M12 -8M13 -EM14 -8M15 -8M16 -EM18 -8M20 -8M22 -8M24 -8M28 -8M32 -10M10 -10M12 -10M14 -10M16 -10M20 -10M24 -10M28 -10M32 -12M12 -12M14 -12M16 -1ZMZO -12M24 -1 2M28 -1 2M32 -14M16 -14MZO -14M24 -14M28 -14M32 MONEL CADMIUM PLATED -6MP4 -6MP5 -6MP6 -6MP7 -6MP8

20、 -6MP9 -6MP10 -6MP11 -6MP12 -6MP13 -6MP14 -6MP15 -6MP16 -6MP18 -6MP20 -6MP22 -6MP24 -6MP28 -6MP32 -8MP5 -8MP6 -8MP7 -8MP8 -8MP9 -8MP10 -8MP11 -8MPl2 -8MP13 -8MP14 -8MP15 -8MP16 -8MP18 -8MPZO -8MP22 -8MP24 -8MP28 -8MP32 -1 OMP1 O -10MP12 -10MP14 -10MP16 -10MP20 -10MP24 -10MP28 -10MP32 -1 2MP12 -12MP1

21、4 -12MP16 -1 2MP20 -1 2MP24 -1 2MP28 -1 2MP32 -14MP16 -14MP20 -14MP24 -14MP28 -14MP32 318 - 711 6 - LENGTH ,250 312 ,375 ,438 .500 .562 325 .688 .750 .a12 A75 .938 1.000 1.125 1.250 1.375 1.500 1.750 2.000 ,312 375 .438 ,500 ,562 .625 .688 .750 ,812 ,875 .938 1 .o00 1.125 1.250 1.375 1.500 1.750 2.0

22、00 .625 .750 375 1 .o00 1.250 1.500 1.750 2.000 .750 .a75 1 .o00 1.250 1.500 1.750 2.000 1 .o00 1.250 1.500 1.750 2.000 Copyright Aerospace Industries Association of America Inc. Provided by IHS under license with AIA/NASNot for ResaleNo reproduction or networking permitted without license from IHS-

23、,-/:#:#$#:$:*:$#:#NATIONAL AEROSPACE STANDARD CCOPYRIGHT Zoo0 AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA MC ALL RIGHTS RESERVED iNEL REPACEMENT MS20615 -2Mz -2M3 -2M4 -2M5 -2M8 -2M7 -2M8 -3M3 -3M4 -3M5 -3M6 -3M7 TABLE 111. INTER( OAL -. .- MONEL C, INACTIVE MS20435 M2C2 MZC3 M2U M2C5 42cB M2C7 MZca

24、 43c3 43u 43c5 43cB 43c7 I - MS20435 42-2 42-3 424 w-5 442-6 42-7 424 43-3 434 43-5 -MM 43-7 MM 43-10 43-12 43-14 43-18 Mw 44-4 44-5 -w 44-7 -w 44-10 MC12 44-14 44-18 -MC18 45-4 45-5 M5-6 45-7 -M54 45-10 45-12 -M5-I4 45-18 45-18 464 -MM 488 467 488 46-10 4612 48-14 4618 4618 46-20 48-22 -M624 48-5 4

25、8-6 48-7 488 48-10 48-12 48-14 48-18 48-20 48-24 -3M8 -3MIO -3M12 - - 443 444 -4M5 -4M8 -4M7 448 -4M10 -4M12 -4M14 -4M18 -4M18 -5M4 -5M5 -5M8 -5M7 -5M8 -5M10 -5M12 -5M14 -5Ml -5M18 bM4 bM5 bM8 bM7 -6M8 4410 bM12 4M14 bM18 SM18 -6M20 bM22 bM24 -8M5 -8M8 BM7 -8M8 -8M10 -8M12 -8M14 -8M18 -8M20 -8M24 43

26、cB 43C10 -M3C12 - - 44c3 -M4U M4C5 4403 -M4C7 -M4cB -M4C10 -M4C12 M4C14 M4C18 44C18 M5U -M5C5 45C8 45C7 45C8 -M5C10 -M5C12 M5C14 M5C18 45C18 - - - - - - - - - - - - - - - - - - - - - - - -4MP4 -4MP5 -4MP6 -4MP7 -4MP8 -4MPI0 -4MP12 -4MPI4 -4MP18 -4MP18 -5MP4 -5MP5 -5MP6 -5MP7 -5MP8 -5MP10 -5MP12 -5MP

27、14 -5MP18 -5MP18 - - - - - - - - - - - - - - - - - - - - - - ANGEABILITY TABLE NUMBERS MUM PLATED COPPER CU2-2 -2cu2 Cu44 4Cu4 CM -4cu5 Cu44 4CU8 Cu-7 -4cu7 CW-8 4CU8 Cw-10 -4cu10 CUCI2 -4cu12 Cu4-14 -4CU14 Cw-18 -4CUl8 - - - - - - CU54 -5cU8 CU5-7 -5cu7 CU54 -5CU8 CU510 -5cu10 CU5-12 -5cu12 CU514 -

28、5cU14 CU5-18 -5cUI8 - - - - - - CU88 +CU8 CU67 bCU7 CU88 -6CU8 CU610 -6CU10 CU612 bCU12 CU614 bCU14 CU616 %CU18 CU618 %CU18 CU620 -6cu20 CU622 %CU22 CU624 %CU24 - - - - - - - - - - - - - - - - - - - - -2MP3 -2MP4 -2MP5 -3MP4 CU34 -3MP6 -3MP7 -3MP8 -3MP10 -3MP12 - CUM CU3-7 CUM CU3-10 CU3-12 CU3-I4 -

29、3CuB -3cu7 -3CU8 -3CUlO -3CU12 -3CU14 - I CU3-16 I -3CU18 -4MP3 I Cu44 I -4cu3 I NASM20615 USE OF OR RELIANCE UPON THIS DOCUMENT OR ANY NATIONAL AEROSPACE STANDARD IS ENTIRELY VOLUNTARY. AIA DOES NOT QUALIFY SUPPLIERS OR CERTIFY CONFORMANCE OF ITEMS PROCURED UNDER NATIONAL AEROSPACE STANDARDS. AIA M

30、AKES NO REPRESENTATION OR CLAIM RESPECTING (I) THE SUITABILITY OF ITEMS FOR ANY Pmncum APPLICATION, OR (2) THE EXISTENCE OF OR APPLICABILITY THERETO OF PATENT OR TRADEMARK RIGHTS. Copyright Aerospace Industries Association of America Inc. Provided by IHS under license with AIA/NASNot for ResaleNo reproduction or networking permitted without license from IHS-,-/:#:#$#:$:*:$#:#主营业务范围：ASTM、NAS、NASM、MIL、ISOOOO、EN、DIN等技术标准翻译；技术资料翻译。业务QQQQQQQQ：2298175560专业诚信质量不满意，可不付款专注于技术翻译