IEC 60034-12-2016 Rotating electrical machines - Part 12 Starting performance of single-speed three-phase cage induction motors《旋转电机.第12部分 单速三相笼型感应电动机的起动性能》.pdf

1、 IEC 60034-12 Edition 3.0 2016-11 INTERNATIONAL STANDARD NORME INTERNATIONALE Rotating electrical machines Part 12: Starting performance of single-speed three-phase cage induction motors Machines lectriques tournantes Partie 12: Caractristiques de dmarrage des moteurs triphass induction cage une seu

2、le vitesse IEC 60034-12:2016-11(en-fr) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2016 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopy

3、ing and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local I

4、EC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms,

5、sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence

6、. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all elec

7、trical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue

8、 The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search e

9、nables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details

10、all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 15 additional languages.

11、 Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary 65 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from

12、 earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internat

13、ionale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que

14、vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documen

15、ts de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projet

16、s et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le

17、premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 15 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/

18、glossary 65 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/cs

19、c Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 60034-12 Edition 3.0 2016-11 INTERNATIONAL STANDARD NORME INTERNATIONALE Rotating electrical machines Part 12: Starting performance of single-speed three-phase cage induct

20、ion motors Machines lectriques tournantes Partie 12: Caractristiques de dmarrage des moteurs triphass induction cage une seule vitesse INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 29.160.01 ISBN 978-2-8322-3768-7 Registered trademark of the International E

21、lectrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 IEC 60034-12:2016 IEC 2016

22、 CONTENTS FOREWORD . 3 1 Scope 5 2 Normative references 5 3 Terms and definitions 5 4 Symbols 7 5 Designation . 7 5.1 General . 7 5.2 Design N . 7 5.3 Design NE 7 5.4 Designs NY and NEY 7 5.5 Design H . 7 5.6 Design HE 8 5.7 Designs HY and HEY 8 6 Design N requirements 8 6.1 Torque characteristics .

23、 8 6.2 Locked rotor current and apparent power 8 6.3 Starting requirements 8 7 Design NE starting requirements . 9 8 Designs NY and NEY starting requirements . 9 9 Design H requirements 9 9.1 Starting torque 9 9.2 Locked rotor current and apparent power 9 9.3 Starting requirements 9 10 Design HE sta

24、rting requirements . 10 11 Designs HY and HEY starting requirements . 10 Table 1 Minimum values of torques for design N 10 Table 2 Maximum values of locked rotor apparent power for designs N and H 11 Table 3 Maximum values of locked rotor apparent power for designs NE and HE . 11 Table 4 External mo

25、ment of inertia (J) 12 Table 5 Minimum values of torques for design H 13 Table 6 Minimum values of torques for design N motors with type of protection Ex eb increased safety . 13 Table 7 External moment of inertia (J) for motors with type of protection Ex eb increased safety . 14 IEC 60034-12:2016 I

26、EC 2016 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ROTATING ELECTRICAL MACHINES Part 12: Starting performance of single-speed three-phase cage induction motors FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national e

27、lectrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Spec

28、ifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. Interna

29、tional, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The form

30、al decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations fo

31、r international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4

32、) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shal

33、l be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certif

34、ication bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal inju

35、ry, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references c

36、ited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identif

37、ying any or all such patent rights. International Standard IEC 60034-12 has been prepared by IEC technical committee 2: Rotating machinery. This third edition cancels and replaces the second edition, published in 2002, and its amendment 1, published in 2007. It constitutes a technical revision. 4 IE

38、C 60034-12:2016 IEC 2016 The main technical changes with regard to the previous edition are as follows: Clause or subclause Change 1 Part of note 3 moved to the regular text 3 Definition of locked rotor current and of rated voltage added 5 New design letter E for extended efficiency motors, explanat

39、ion of all design letters, and description of new designs NE, NEY, HE, and HEY 6.2 and 9.2 Limits for locked rotor apparent power for E(Ex)e motors replaced by a reference to IEC 60079-7 Formula added to calculate locked rotor current from apparent power 7 and 10 Definition of new limits for locked

40、rotor apparent power for extended efficiency motors (new table 3) Tables Tables 1 and 4 to 7 extended down to P N= 120 W Name of type of protection updated according to IEC 60079-7 Ed. 5 The text of this standard is based on the following documents: CDV Report on voting 2/1789/CDV 2/1821A/RVC Full i

41、nformation on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of the IEC 60034 series, published under the general title Rotating e

42、lectrical machines, can be found on the IEC website. NOTE A table of cross-references of all IEC TC 2 publications can be found in the IEC TC 2 dashboard on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on th

43、e IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IEC 60034-12:2016 IEC 2016 5 ROTATING ELECTRICAL MACHINES Part 12: Starting performance of single-spee

44、d three-phase cage induction motors 1 Scope This part of IEC 60034 specifies the parameters for eight designs of starting performance of single-speed three-phase 50 Hz or 60 Hz cage induction motors in accordance with IEC 60034-1 that: have a rated voltage up to 1 000 V; are intended for direct-on-l

45、ine or star-delta starting; are rated on the basis of duty type S1; are constructed to any degree of protection and explosion protection. This document also applies to dual voltage motors provided that the flux saturation level is the same for both voltages. The values of torque, apparent power and

46、current given in this document are limiting values (that is, minimum or maximum without tolerance). NOTE 1 It is not expected that all manufacturers will produce machines for all eight designs. The selection of any specific design in accordance with this document will be a matter of agreement betwee

47、n the manufacturer and the purchaser. NOTE 2 Designs other than the eight specified may be necessary for particular applications. NOTE 3 It should be noted that values given in manufacturers catalogues may include tolerances in accordance with IEC 60034-1. NOTE 4 The values tabled for locked rotor a

48、pparent power are based on r.m.s. symmetrical steady state locked rotor currents; at motor switch on there will be a one-half cycle asymmetrical instantaneous peak current which may range from 1,8 to 2,8 times the steady state locked rotor value. The current peak and decay time are a function of the

49、 motor design and switching angle. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60034-30-1, Rotating electrical machin