IEC 60076-1-2011 Power transformers - Part 1 General《电力变压器.第1部分 总则》.pdf

1、 IEC 60076-1 Edition 3.0 2011-04 INTERNATIONAL STANDARD NORME INTERNATIONALE Power transformers Part 1: General Transformateurs de puissance Partie 1: Gnralits IEC 60076-1:2011 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2011 IEC, Geneva, Switzerland All rights reserved. Unless otherwise speci

2、fied, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions abou

3、t IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre rep

4、roduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir d

5、es droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical C

6、ommission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have th

7、e latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and

8、replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of e

9、lectronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your

10、 feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore e

11、t publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou a

12、mendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les

13、 publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le pr

14、emier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients:

15、www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 60076-1 Edition 3.0 2011-04 INTERNA

16、TIONAL STANDARD NORME INTERNATIONALE Power transformers Part 1: General Transformateurs de puissance Partie 1: Gnralits INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE XB ICS 29.180 PRICE CODE CODE PRIX ISBN 978-2-88912-438-1 Registered trademark of the Internati

17、onal Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale 2 60076-1 IEC:2011 CONTENTS FOREWORD . 5 1 Scope . 7 2 Normative references . 8 3 Terms and definitions . 8 3.1 General . 8 3.2 Terminals and neutral point . 9 3.3 Windings . 10 3.4 Rating . 11 3.5 Tapping

18、s . 13 3.6 Losses and no-load current . 15 3.7 Short-circuit impedance and voltage drop 16 3.8 Temperature rise . 17 3.9 Insulation 17 3.10 Connections 17 3.11 Test classification 18 3.12 Meteorological data with respect to cooling . 19 3.13 Other definitions 19 4 Service conditions 20 4.1 General .

19、 20 4.2 Normal service conditions . 20 5 Rating and general requirements 22 5.1 Rated power 22 5.1.1 General . 22 5.1.2 Preferred values of rated power . 22 5.1.3 Minimum power under alternative cooling modes . 22 5.1.4 Loading beyond rated power 23 5.2 Cooling mode 23 5.3 Load rejection on transfor

20、mers directly connected to a generator 23 5.4 Rated voltage and rated frequency 23 5.4.1 Rated voltage 23 5.4.2 Rated frequency 23 5.4.3 Operation at higher than rated voltage and/or at other than rated frequency 24 5.5 Provision for unusual service conditions 24 5.6 Highest voltage for equipment U

21、mand dielectric tests levels . 25 5.7 Additional information required for enquiry 25 5.7.1 Transformer classification 25 5.7.2 Winding connection and number of phases 25 5.7.3 Sound level . 26 5.7.4 Transport . 26 5.8 Components and materials 26 6 Requirements for transformers having a tapped windin

22、g . 27 6.1 General Notation of tapping range 27 6.2 Tapping voltage tapping current. Standard categories of tapping voltage variation. Maximum voltage tapping. 27 6.3 Tapping power. Full-power tappings reduced-power tappings . 30 60076-1 IEC:2011 3 6.4 Specification of tappings in enquiry and order

23、 31 6.4.1 General . 31 6.4.2 Constructional specification . 31 6.4.3 Functional specification . 32 6.5 Specification of short-circuit impedance 32 6.6 Load loss and temperature rise . 33 7 Connection phase displacement symbols . 34 7.1 Connection and phase displacement symbols for three-phase trans

24、formers and for single phase transformers connected in a three phase bank 34 7.1.1 Connection symbol 34 7.1.2 Phase displacement in clock number notation 34 7.1.3 Windings not intended to be loaded . 35 7.1.4 Reconnectable windings 35 7.1.5 Examples 35 7.2 Connection and phase displacement symbols f

25、or single phase transformers not in three phase bank . 37 7.2.1 Connection symbol 37 7.2.2 Phase displacement in clock number notation 38 7.2.3 Windings not intended to be loaded . 38 7.2.4 Reconnectable windings 38 8 Rating plates 39 8.1 General . 39 8.2 Information to be given in all cases . 39 8.

26、3 Additional information to be given when applicable 40 9 Safety, environmental and other requirements 41 9.1 Safety and environmental requirements . 41 9.1.1 Liquid leaks . 41 9.1.2 Safety considerations 41 9.2 Dimensioning of neutral connection . 42 9.3 Liquid preservation system 42 9.4 DC current

27、s in neutral circuits . 43 9.5 Centre of gravity marking 43 10 Tolerances . 43 11 Tests 44 11.1 General requirements for routine, type and special tests . 44 11.1.1 General . 44 11.1.2 Routine tests . 46 11.1.3 Type tests . 46 11.1.4 Special tests 47 11.2 Measurement of winding resistance . 47 11.2.

28、1 General . 47 11.2.2 Dry-type transformers 47 11.2.3 Liquid-immersed type transformers 48 11.3 Measurement of voltage ratio and check of phase displacement 48 11.4 Measurement of short-circuit impedance and load loss 48 11.5 Measurement of no-load loss and current 49 11.6 Measurement of zero-sequen

29、ce impedance(s) on three-phase transformers 50 11.7 Tests on on-load tap-changers Operation test 51 4 60076-1 IEC:2011 11.8 Leak testing with pressure for liquid immersed transformers (tightness test) 51 11.9 Vacuum deflection test for liquid immersed transformers . 51 11.10 Pressure deflection test

30、 for liquid immersed transformers 52 11.11 Vacuum tightness test on site for liquid immersed transformers . 53 11.12 Check of core and frame insulation . 53 12 Electromagnetic compatibility (EMC) 53 13 High frequency switching transients 54 Annex A (informative) Check list of information to be provi

31、ded with enquiry and order . 55 Annex B (informative) Examples of specifications for transformers with tappings . 59 Annex C (informative) Specification of short-circuit impedance by boundaries . 63 Annex D (informative) Examples of three-phase transformer connections 64 Annex E (normative) Temperat

32、ure correction of load loss 67 Annex F (informative) Facilities for future fitting of condition monitoring systems to transformers . 68 Annex G (informative) Environmental and safety considerations 69 Bibliography 70 Figure 1 Different types of voltage variation . 30 Figure 2 Illustration of clock n

33、umber notation . 35 Figure 3 Illustration of clock number notation for transformers with open windings . 37 Figure 4 Illustration of clock number notation . 39 Figure C.1 Example of specification of short-circuit impedance by boundaries . 63 Figure D.1 Common connections . 64 Figure D.2 Additional c

34、onnections 65 Figure D.3 Designation of connections of three-phase auto-transformers by connection symbols (auto-transformer Ya0) 66 Figure D.4 Example of three single-phase transformers connected to form a three- phase bank (connection symbol Yd5) 66 Table 1 Tolerances 44 Table B.1 Example of combi

35、ned voltage variation 60 Table B.2 Example of functional specification with HV voltage variation . 61 Table B.3 Example of functional specification with LV voltage variation . 62 Table F.1 Facilities for condition monitoring . 68 60076-1 IEC:2011 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ POWER T

36、RANSFORMERS Part 1: General FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions conce

37、rning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Thei

38、r preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates c

39、losely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the rel

40、evant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the

41、 technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximu

42、m extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies pr

43、ovide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC o

44、r its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expen

45、ses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Atten

46、tion is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60076-1 has been prepared by IEC technical committee 14: Power transform

47、ers. This third edition cancels and replaces the second edition published in 1993, and its Amendment 1(1999). It is a technical revision. This edition includes the following significant technical changes with respect to the previous edition: addition of a definition of harmonic content; addition of

48、a subclause on transport; addition of functional method of specification; addition of connection symbols for single phase transformers; addition of safety and environmental requirements; addition of requirements for liquid preservation systems; 6 60076-1 IEC:2011 addition of a clause on DC currents;

49、 addition of vacuum, pressure and leak tests on tanks; the requirements formerly in Annex A are now incorporated in the text and Annex A is now an informative checklist; informative annexes have been added on facilities for condition monitoring and environmental and safety considerations. The text of this standard is based on the following documents: FDIS Report on voting 14/675/FDIS 14/6