IEC 60079-10-2-2015 Explosive atmospheres - Part 10-2 Classification of areas - Explosive dust atmospheres《爆炸性环境.第10-2部分 区域分类.易燃灰尘环境》.pdf

1、 IEC 60079-10-2 Edition 2.0 2015-01 INTERNATIONAL STANDARD NORME INTERNATIONALE Explosive atmospheres Part 10-2: Classification of areas Explosive dust atmospheres Atmosphres explosives Partie 10-2: Classement des emplacements Atmosphres explosives poussireuses IEC 60079-10-2:2015-01(en-fr) THIS PUB

2、LICATION IS COPYRIGHT PROTECTED Copyright 2015 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writin

3、g from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further inform

4、ation. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national

5、de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3,

6、rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. Ab

7、out IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the

8、 entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of

9、 criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online

10、 and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Elec

11、trotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 60 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IE

12、C TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire

13、 organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plu

14、s rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour

15、 PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications rempl

16、aces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en lig

17、ne de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 15 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary Plus de 60

18、 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous d

19、sirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 60079-10-2 Edition 2.0 2015-01 INTERNATIONAL STANDARD NORME INTERNATIONALE Explosive atmospheres Part 10-2: Classification of areas Explosive dust atmospheres Atmosphres explosives P

20、artie 10-2: Classement des emplacements Atmosphres explosives poussireuses INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 29.260.20 ISBN 978-2-8322-2195-2 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Ele

21、ctrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 IEC 60079-10-2:2015 IEC 2015 CONTENTS FOREWORD . 4 INTRODUCTION . 7 1 Scope 8 2 Normat

22、ive references 9 3 Terms and definitions 9 4 Area classification . 12 4.1 General . 12 4.2 Area classification procedure for explosive dust atmospheres . 13 4.3 Competence of personnel . 14 5 Sources of release. 14 5.1 General . 14 5.2 Dust containment 14 5.3 Identification and grading of sources of

23、 release 14 6 Zones 15 6.1 General . 15 6.2 Extent of zones . 15 6.2.1 General . 15 6.2.2 Zone 20 . 15 6.2.3 Zone 21 . 16 6.2.4 Zone 22 . 16 7 Dust layers 16 8 Documentation 17 8.1 General . 17 8.2 Drawings, data sheets and tables . 17 8.2.1 Content of documents 17 8.2.2 Preferred Symbol key for are

24、a classification zones 18 Annex A (informative) Area classification examples . 19 A.1 Examples of zones 19 A.1.1 General . 19 A.1.2 Zone 20 . 19 A.1.3 Zone 21 . 19 A.1.4 Zone 22 . 19 A.2 Bag emptying station within a building and without exhaust ventilation 20 A.3 Bag emptying station with exhaust v

25、entilation . 21 A.4 Cyclone and filter with clean outlet outside building 21 A.5 Drum tipper within a building without exhaust ventilation . 22 Annex B (informative) Housekeeping . 24 B.1 Introductory remarks . 24 B.2 Levels of housekeeping 24 Annex C (informative) Hybrid mixtures . 26 C.1 General .

26、 26 C.2 Ventilation. 26 C.3 Explosive limits . 26 C.4 Chemical reactions . 26 C.5 Minimum ignition parameters 26 IEC 60079-10-2:2015 IEC 2015 3 C.6 Final classification 26 Bibliography 27 Figure 1 Identification of zones on drawings 18 Figure A.1 Bag emptying station within a building and without ex

27、haust ventilation 20 Figure A.2 Bag emptying station with exhaust ventilation . 21 Figure A.3 Cyclone and filter with clean outlet outside building 22 Figure A.4 Drum tipper within a building without exhaust ventilation . 23 Table 1 Designation of zones depending on presence of dust 16 4 IEC 60079-1

28、0-2:2015 IEC 2015 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ EXPLOSIVE ATMOSPHERES Part 10-2: Classification of areas Explosive dust atmospheres FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical c

29、ommittees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Techn

30、ical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmen

31、tal and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or a

32、greements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international u

33、se and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to pro

34、mote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indi

35、cated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6

36、) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property dama

37、ge or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publ

38、ication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all s

39、uch patent rights. International Standard IEC 60079-10-2 has been prepared by subcommittee 31J: Classification of hazardous areas and istallation requirements, of IEC technical committee 31: Equipment for explosive atmospheres. This second edition of IEC 60079-10-2 cancels and replaces the first edi

40、tion of IEC 60079-10-2 published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: IEC 60079-10-2:2015 IEC 2015 5 Type Explanation of the significance of the changes Clause Minor and editori

41、al changes Extension Major technical changes Definition of “atmospheric conditions” deleted 3 X Definition of “combustible dust” aligned with other documents per recommendations of WG 28 3.4 X Editorial change to definition of “explosive dust atmosphere” to delete mention of flyings, since the defin

42、ition of dust according to 60079-10-2 includes flyings. 3.5 X Definition of “combustible flyings” aligned with other documents per recommendations of WG 28 3.8 X Definition of “continuous formation of a dust cloud” added 3.14 X Definition of “catastrophic failure” added 3.20 X Definition of “ignitio

43、n temperature of a dust layer” aligned with other documents per recommendations of WG 28 and to change reference from 61241-2-1 to 80079-20-2 3.22 X Definitions of “zone 20, zone 21 and zone 22” added. These were previously incorrectly included in the body of the document. 3.25.1 3.25.2 3.25.3 X Dus

44、t cloud density and concentration added as factors to consider for a release 4.1 X Wording changed to require EPL to be noted on area classification drawing 4.1 X Notes 1 and 3 changed to normative text 4.1 X Reference to published sources for dust characteristics deleted 4.2 X Reference to 80079-20

45、2 added 4.2 a) X Section on competence of personnel added 4.3 X Note on verification dossier deleted 5.2 X Example added for continuous grade of release, zone information moved to Clause 6 5.3 X Paragraph added about dust layers being raised into a cloud 7 X EPLs added to list for documentation, no

46、te added warning of variability in published dust data 8.1 X Symbol keys are identified as preferred 8.2 X Note added to zone 21 and zone 22 clause about distance around source of release Annex A X Zone 22 paragraph added to this example, and figure modified to show Zone 22 location A.2 X Annex B on

47、 hot surfaces deleted Annex B in previous edition X Annex D on explanation of EPLs deleted Annex D in previous edition X Annex on hybrid mixtures added Annex C X 6 IEC 60079-10-2:2015 IEC 2015 Explanation of the types of significant changes: 1. Minor and editorial changes: Clarification Decrease of

48、technical requirements Minor technical change Editorial corrections These are changes which modify requirements in an editorial or a minor technical way. They include changes of the wording to clarify technical requirements without any technical change, or a reduction in the level of existing requir

49、ement. 2. Extension: Addition of technical options These are changes which add new or modify existing technical requirements, in a way that new options are given, but without increasing the requirements that are fully compliant with the previous standard. Therefore, these will not have to be considered for existing area classifications in conformity with the preceding edition. 3. Major technical changes: Addition o