IEC 60079-26-2014 Explosive atmospheres - Part 26 Equipment with Equipment Protection Level (EPL) Ga《电气设备.第26部分 设备保护水平(EPL)镓的设备》.pdf

1、 IEC 60079-26 Edition 3.0 2014-10 INTERNATIONAL STANDARD NORME INTERNATIONALE Explosive atmospheres Part 26: Equipment with Equipment Protection Level (EPL) Ga Atmosphres explosives Partie 26: Matriel dun niveau de protection du matriel (EPL) Ga IEC 60079-26:2014-10(en-fr) THIS PUBLICATION IS COPYRI

2、GHT PROTECTED Copyright 2014 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC

3、or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de r

4、eproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du

5、 demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax:

6、 +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publicatio

7、ns The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliograp

8、hical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (referen

9、ce number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a m

10、onth by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 14 additional languages. Also known as the International Electrotechnical Vocab

11、ulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 55 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 an

12、d CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mond

13、iale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corri

14、gendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, table

15、ttes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. I

16、EC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectr

17、oniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 14 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary Plus de 55 000 entres termin

18、ologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner

19、des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 60079-26 Edition 3.0 2014-10 INTERNATIONAL STANDARD NORME INTERNATIONALE Explosive atmospheres Part 26: Equipment with Equipment Protection Level (EPL) Ga Atmosphres explosives Partie 26: Matriel dun

20、niveau de protection du matriel (EPL) Ga INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE Q ICS 29.260.20 PRICE CODE CODE PRIX ISBN 978-2-8322-1903-4 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechniq

21、ue Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 IEC 60079-26:2014 IEC 2014 CONTENTS FOREWORD . 3 1 Scope 6 2 Normative references. 6 3 Terms and

22、definitions 7 4 Requirements for design and construction 7 4.1 Protection measures against ignition hazards of the electrical circuits 7 General . 7 4.1.1Application of two independent Types of Protection providing EPL Gb . 7 4.1.2Application of a Type of Protection providing EPL Gb and a separation

23、 4.1.3 element . 8 4.2 Equipment with moving parts . 12 Frictional heating . 12 4.2.1Damage arising from failure of moving parts . 12 4.2.2Light metals . 12 4.2.3 4.3 Process connection . 13 5 Type tests . 13 5.1 Standardized types of protection . 13 5.2 Separation elements . 13 5.3 Temperature eval

24、uation . 13 6 Marking . 14 6.1 General . 14 6.2 Examples of marking . 14 7 Instructions 14 7.1 Separation elements: 14 7.2 Process connection: 15 7.3 EPL allocation . 15 Bibliography . 16 Figure 1 Example of a partition wall with a conductor bushing considered as gas diffusion tight 9 Figure 2 Examp

25、le of a separation element with a cylindrical shaft joint and naturalventilation 12 Table 1 Separation elements 11 IEC 60079-26:2014 IEC 2014 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ EXPLOSIVE ATMOSPHERES Part 26: Equipment with Equipment Protection Level (EPL) Ga FOREWORD 1) The International

26、Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fie

27、lds. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IE

28、C National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardiza

29、tion (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has represen

30、tation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC ca

31、nnot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publicati

32、ons. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, a

33、ccess to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including i

34、ndividual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance up

35、on, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements

36、 of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60079-26 has been prepared by IEC technical committee 31: Equipment for explosive atmospheres. This third edition cancels and repl

37、aces the second edition published in 2006 and constitutes a technical revision. 4 IEC 60079-26:2014 IEC 2014 This edition includes the following significant changes with respect to the previous edition: Type Changes Clause Minor and editorial changes Extension Major technical changes Notes deleted 1

38、 X Reference to associated apparatus deleted 1 X Additional normative references included 3 X Requirements against mechanical and electrostatic ignition hazards deleted (now covered in IEC 60079-0) 4.1 X Requirement for separation element detailed regarding external influences 4.1.3.2 X Intrinsic sa

39、fety Ex ia as single type of protection including associated apparatus deleted (now covered by EPL) 4.2.2 (ed.2) X Encapsulation Ex ma as single type of protection deleted (now covered by EPL) 4.2.3 (ed.2) X Conditions a) and b) linked with an “and” , therefore requirement of “flameproof joint” dele

40、ted in following clause. Both requirements already covered by separation elements and standardised process connections. 4.3 X Process connection requires a sufficiently tight joint: IP66 added alternatively to IP67 4.3 X Requirement for isolated conductive components deleted (now covered in IEC 6007

41、9-0) 4.4 (ed.2) X Requirements for non-conductive enclosures deleted (now covered in IEC 60079-0) 4.5 (ed.2) X Test of partition walls according to 4.1.3.2 b) is specified in more detail 5.2 C1 Marking example for associated apparatus deleted 6.2 b) X Note 3 with an additional example added 6.2 X Sp

42、ecification of material of partition wall required in instructions (also required in 4.1.3.2) 7 X Alternative risk assessment method deleted (is now generally introduced) AnnexA (ed.2) X NOTE The technical changes referred to include the significance of technical changes in the revised IEC Standard,

43、 but they do not form an exhaustive list of all modifications from the previous version. Explanation of the types of changes: A) Definitions 1) Minor and editorial changes: Clarification Decrease of technical requirements Minor technical change Editorial corrections These are changes which modify re

44、quirements in an editorial or a minor technical way. They include changes of the wording to clarify technical requirements without any technical change, or a reduction in level of existing requirement. IEC 60079-26:2014 IEC 2014 5 2) Extension: Addition of technical options These are changes which a

45、dd new or modify existing technical requirements, in a way that new options are given, but without increasing requirements for equipment that was fully compliant with the previous standard.Therefore, these will not have to be considered for products in conformity with the preceding edition. 3) Major

46、 technical changes: addition of technical requirements increase of technical requirements These are changes to technical requirements (addition, increase of the level or removal) made in a way that a product in conformity with the preceding edition will not always be able to fulfil the requirements

47、given in the later edition. These changes have to be considered for products in conformity with the preceding edition. For these changes additional information is provided in Clause B below. NOTE These changes represent current technological knowledge. However, these changes should not normally have

48、 an influence on equipment already placed on the market. B) Information about the background of Major technical changes C1: Introduction of type tests for separation elements according to “4.1.3.2 b)” The text of this standard is based on the following documents: FDIS Report on voting 31/1146/FDIS 3

49、1/1155/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 60079 series, published under the general title Explosive atmospheres, can be found on the IEC website. The committee has decided that the contents of this publication will remai