IEC 60079-35-2-2011 Explosive atmospheres - Part 35-2 Caplights for use in mines susceptible to firedamp - Performance and other safety-related matters《易爆炸环境.第35-2部分 瓦斯敏感型矿井中使用的矿灯.性能和其他与安全相关事项》.pdf

1、 IEC 60079-35-2 Edition 1.0 2011-12 INTERNATIONAL STANDARD NORME INTERNATIONALE Explosive atmospheres Part 352: Caplights for use in mines susceptible to firedamp Performance and other safety-related matters Atmosphres explosives Partie 35-2: Lampes chapeaux utilisables dans les mines grisouteuses P

2、erformances et autres sujets relatifs la scurit IEC60079-35-2:2011 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2011 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mec

3、hanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the a

4、ddress below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la ph

5、otocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national

6、 de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all

7、 electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.i

8、ec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publi

9、cations. Just Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with e

10、quivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or cont

11、act us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies appa

12、rentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Cata

13、logue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les n

14、ouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 20 000 termes e

15、t dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette public

16、ation ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 60079-35-2Edition 1.0 2011-12INTERNATIONAL STANDARD NORME INTERNATIONALEExplosive atmospheres Part 352: Caplights for use in mines susceptible to

17、 firedamp Performance and other safety-related matters Atmosphres explosives Partie 35-2: Lampes chapeaux utilisables dans les mines grisouteuses Performances et autres sujets relatifs la scurit INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE MICS 29.260.20 PRICE

18、 CODECODE PRIXISBN 978-2-88912-818-1 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale 2 60079-35-2 IEC:2011 CONTENTS FOREWORD . 3 1 Scope . 5 2 Normative references . 5 3 Terms and definitions . 5 4 Light output 5 4.1

19、 Light sources . 5 4.2 Light source holder 6 4.3 Luminous intensity and illuminance . 6 4.4 Auxiliary light source . 6 4.5 Focus 6 4.6 Chromaticity 6 5 Reliability . 6 5.1 Lamp life . 6 5.2 Battery life (charge/discharge cycles) 7 5.3 Caplight useful working period . 7 5.4 Durability . 7 5.4.1 Faste

20、ners and connectors . 7 5.4.2 Resistance to abrasion 7 5.4.3 Operability after mechanical tests 7 6 Ergonomics 7 6.1 Mass . 7 6.2 Ease of operation 8 6.3 Maintainability . 8 6.4 Headpiece security 8 7 Type tests Illumination throughout the useful working period . 8 8 Instructions. 9 9 Marking 9 Anne

21、x A (informative) Examples of the manufacturers instructions for routine testing by the user 10 Figure A.1 Schematic drawing of a typical photometric sphere . 11 Table A.1 Tabulation of tests . 12 60079-35-2 IEC:2011 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ EXPLOSIVE ATMOSPHERES Part 35-2: Capl

22、ights for use in mines susceptible to firedamp Performance and other safety-related matters FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC

23、 is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS)

24、and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with t

25、he IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearl

26、y as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that

27、sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees

28、undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any

29、 attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edi

30、tion of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether di

31、rect or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispen

32、sable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60079-35-

33、2 has been prepared by IEC technical committee 31: Equipment for explosive atmospheres. This first edition of IEC 60079-35-2 cancels and replaces the second edition (2005) of IEC 62013-2 published in 2005 and constitutes a full technical revision. The general revision and updating of Edition 2 of IE

34、C 62013-2 has been necessitated by the advent of new technologies related to caplight design, in particular those related light-emitting diode (LED) light sources. It is intended that there should be a stronger link between Part 1 (Construction) and Part 2 (Performance) of this Standard by upgrading

35、 the reference in the Scope of part 1 from a note to a requirement. In addition as this Standard is now to become one of the IEC 60079 series, changes have been made to bring it more in line with others in the series by cross referencing. This has enabled there to be a reduction in the number and le

36、ngth of clauses in the Standard. 4 60079-35-2 IEC:2011 The text of this standard is based on the following documents: FDIS Report on voting 31/955/FDIS 31/963/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This

37、publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all the parts in the IEC 60079 series, under the general title Explosive atmospheres, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until

38、 the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 60079-35-2 IEC:2011 5 EXPLOSIVE ATMOSPHERES Part 352: Caplights fo

39、r use in mines susceptible to firedamp Performance and other safety-related matters 1 Scope This part of IEC 60079-35 details those performance and other safety features of caplights, including those with a point of connection for another equipment, not covered in IEC 60079-35-1, but which are impor

40、tant for the safety and working conditions of the user. It may also be applied to caplights for use in mines not likely to be endangered by firedamp. NOTE When this part of the standard is used as a “stand-alone“ document for non-gassy mines, any relevant constructional requirements should be the su

41、bject of agreement between the supplier and the user and, where possible, be as described in IEC 60079-35-1. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references,

42、 the latest edition of the referenced document (including any amendments) applies. IEC 60050-845, International Electrotechnical Vocabulary (IEV) Chapter 845: Lighting IEC 60983, Miniature lamps IEC 60079-35-1, Explosive atmospheres Part 35-1: Caplights for use in mines susceptible to firedamp Gener

43、al requirements Construction and testing in relation to the risk of explosion1ISO 80000-1, Quantities and units Part 1: General 3 Terms and definitions For the purposes of this document, the definitions of ISO 80000-1 and IEC 60050(845) and the following apply: 3.1 useful working period period in ho

44、urs defined by the manufacturer, taking into account the current drawn by the main light source and if appropriate, the average current drawn by any accessories during that period, during which the main light source of the caplight may be continuously used and comply with the minimum luminous intens

45、ity requirements of this standard 4 Light output 4.1 Light sources 4.1.1 Every headpiece shall have a minimum of two light sources, at least one of which shall be the main source and meet the requirements of this part of IEC 60079-35. Alternatively a _ 1To be published 6 60079-35-2 IEC:2011 single l

46、ight source may be used provided it is a non-filament type and it meets the lamp life defined in 5.1. 4.1.2 Where a caplight is fitted with two light sources, each of which is capable of being the main source, the manufacturer shall designate which of these shall be the main source and which the aux

47、iliary source; otherwise, both sources shall meet the requirements for the main source. 4.1.3 Filament lamps for main and auxiliary sources shall comply with IEC 60983. Where the relevant data sheet is not given in IEC 60983, an equivalent shall be provided by the caplight manufacturer. 4.2 Light so

48、urce holder The holder for the main light source shall be capable of locating and retaining it securely in a focused position with respect to the reflector profile in accordance with 4.5. 4.3 Luminous intensity and illuminance The main beam of light from a headpiece mounted on its intended helmet, i

49、n its normal operating orientation, shall point 10 degrees 5 degrees down from the horizontal. NOTE A statement from the caplight manufacturer stating compliance with this requirement is acceptable and need not be verified if certification is sought. At the end of the useful working period, the luminous intensity from the main light source in a fully assembled headpiece, mounted on its intend