1、 IEC 60086-5 Edition 4.0 2016-07 REDLINE VERSION Primary batteries Part 5: Safety of batteries with aqueous electrolyte IEC 60086-5:2016-07 RLV(en) colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2016 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part o
2、f this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright
3、 or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland w
4、ww.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under c
5、onstant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical
6、Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives inform
7、ation on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The world
8、s leading online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary 65 000 electrot
9、echnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give u
10、s your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC 60086-5 Edition 4.0 2016-07 REDLINE VERSION Primary batteries Part 5: Safety of batteries with aqueous electrolyte INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 29.220.10 ISBN 9
11、78-2-8322-3534-8 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained this publication from an authorized distributor. colour inside 2 IEC 60086-5:2016 RLV IEC 2016 CONTENTS FOREWORD . 5 INTRODUCTION . 7 1 Scope 8 2 Normative references. 8 3 Term
12、s and definitions 8 4 Requirements for safety . 11 4.1 Design 11 4.1.1 General . 11 4.1.2 Venting 11 4.1.3 Insulation resistance 11 4.2 Quality plan. 11 5 Sampling . 11 5.1 General . 11 5.2 Sampling for type approval 11 6 Testing and requirements 12 6.1 General . 12 6.1.1 Applicable safety tests . 1
13、2 6.1.2 Safety Cautionary notice 13 6.1.3 Ambient temperature 14 6.2 Intended use . 14 6.2.1 Intended use tests and requirements 14 6.2.2 Intended use test procedures . 14 6.3 Reasonably foreseeable misuse 17 6.3.1 Reasonably foreseeable misuse tests and requirements . 17 6.3.2 Reasonably foreseeabl
14、e misuse test procedures . 17 7 Information for safety . 19 7.1 Safety Precautions during handling of batteries 19 7.2 Packaging . 21 7.3 Handling of battery cartons 21 7.4 Display and storage 22 7.5 Transportation . 22 7.6 Disposal 22 8 Instructions for use 22 9 Marking . 23 9.1 General (see Table
15、7) . 23 9.2 Marking of small batteries (see Table 7) 23 9.3 Safety pictograms . 24 Annex A (informative) Additional information to 7.4 on display and storage . 25 Annex B (informative) Battery compartment design guidelines 26 B.1 Background . 26 B.1.1 General . 26 B.1.2 Battery failures resulting fr
16、om poor battery compartment design 26 B.1.3 Potential hazards resulting from battery reversal . 26 B.1.4 Potential hazards resulting from a short circuit 26 B.2 General guidance for appliance design 27 IEC 60086-5:2016 RLV IEC 2016 3 B.2.1 Key battery factors to be first considered 27 B.2.2 Other im
17、portant factors to consider . 27 B.3 Specific measures against reversed installation . 28 B.3.1 General . 28 B.3.2 Design of the positive contact . 28 B.3.3 Design of the negative contact . 28 B.3.4 Design with respect to battery orientation . 29 B.3.5 Dimensional considerations 29 B.4 Specific meas
18、ures to prevent short-circuiting of batteries . 31 B.4.1 Measures to prevent short-circuiting due to battery jacket damage 31 B.4.2 Measures to prevent external short-circuit of a battery caused when coiled spring contacts are employed for battery connection . 31 B.5 Special considerations regarding
19、 recessed negative contacts . 33 B.6 Waterproof and non-vented devices . 34 B.7 Other design considerations 34 Annex C (informative) Safety pictograms 36 C.1 Overview General . 36 C.2 Pictograms 36 C.3 Instructions Recommendations for use 38 Bibliography . 39 Figure 1 Sampling for type approval test
20、s and number of batteries required 12 Figure 2 Temperature cycling procedure . 17 Figure 3 Circuit diagram for incorrect installation (four batteries in series) . 18 Figure 4 Circuit diagram for external short circuit 18 Figure 5 Circuit diagram for overdischarge . 19 Figure 6 XYZ axes for free fall
21、 19 Figure 7 Ingestion gauge (Inner dimensions) 21 Figure B.1 Example of series connection with one battery reversed . 26 Figure B.2 Positive contact recessed between ribs . 28 Figure B.3 Positive contact recessed within surrounding insulation . 28 Figure B.4 Negative contact U-shaped to ensure no p
22、ositive (+) battery contact 29 Figure B.5 Design with respect to battery orientation 29 Figure B.6 Example of the design of a positive contact of an appliance . 30 Figure B.7 Example of a short circuit, a switch is piercing the battery insulating jacket 31 Figure B.8 Typical example of insulation to
23、 prevent short circuit 31 Figure B.9 Insertion against spring (to be avoided) . 32 Figure B.10 Examples showing distorted springs 32 Figure B.11 One example of protected insertion . 32 Figure B.12 Example of negative contacts 33 Figure B.13 Example of series connection of batteries with voltage tapp
24、ing . 35 Table 1 Test matrix 13 Table 2 Intended use tests and requirements 14 Table 3 Shock pulse 15 4 IEC 60086-5:2016 RLV IEC 2016 Table 4 Test sequence . 15 Table 5 Test sequence . 16 Table 6 Reasonably foreseeable misuse tests and requirements . 17 Table 7 Marking requirements 24 Table B.1 Dime
25、nsions of battery terminals and recommended dimensions of the positive contact of an appliance in Figure B.6 30 Table B.2 Minimum wire diameters . 33 Table B.3 Dimensions of the negative battery terminal 34 Table C.1 Safety pictograms (1 of 3) 36 IEC 60086-5:2016 RLV IEC 2016 5 INTERNATIONAL ELECTRO
26、TECHNICAL COMMISSION _ PRIMARY BATTERIES Part 5: Safety of batteries with aqueous electrolyte FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of I
27、EC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS
28、) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising wit
29、h the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as ne
30、arly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in th
31、at sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committe
32、es undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide
33、any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest
34、edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether
35、 direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indis
36、pensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. DISCLAIMER This Redline version i
37、s not an official IEC Standard and is intended only to provide the user with an indication of what changes have been made to the previous version. Only the current version of the standard is to be considered the official document. This Redline version provides you with a quick and easy way to compar
38、e all the changes between this standard and its previous edition. A vertical bar appears in the margin wherever a change has been made. Additions are in green text, deletions are in strikethrough red text. 6 IEC 60086-5:2016 RLV IEC 2016 International Standard IEC 60086-5 has been prepared by IEC Te
39、chnical Committee 35: Primary cells and batteries. This fourth edition cancels and replaces the third edition published in 2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) The definition of
40、 explosion was changed to suitable sentence in order to harmonize in IEC 60086 series; b) To prevent removal of hydrogen gas, we revised it to the suitable sentence, c) To prevent misuse, the battery compartments with parallel connections were revised to the suitable sentence. d) To clarify the meth
41、od to determine the insulation resistance. The text of this standard is based on the following documents: FDIS Report on voting 35/1360/FDIS 35/1361/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publicatio
42、n has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 60086 series, published under the general title Primary batteries, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the sta
43、bility date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT The “colour inside” logo on the cover page of this publication in
44、dicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this publication using a colour printer. IEC 60086-5:2016 RLV IEC 2016 7 INTRODUCTION The concept of safety is closely related to safeguarding the integrity
45、of people and property. This part of IEC 60086 specifies tests and requirements for primary batteries with aqueous electrolyte and has been prepared in accordance with ISO/IEC guidelines, taking into account all relevant national and international standards which apply. Also included in this standar
46、d is guidance for appliance designers with respect to battery compartments and information regarding packaging, handling, warehousing and transportation. Safety is a balance between freedom from risks of harm and other demands to be met by the product. There can be no absolute safety. Even at the hi
47、ghest level of safety, the product can only be relatively safe. In this respect, decision-making is based on risk evaluation and safety judgement. As safety will pose different problems, it is impossible to provide a set of precise provisions and recommendations that will apply in every case. Howeve
48、r, this standard, when followed on a judicious “use when applicable“ basis, will provide reasonably consistent standards for safety. 8 IEC 60086-5:2016 RLV IEC 2016 PRIMARY BATTERIES Part 5: Safety of batteries with aqueous electrolyte 1 Scope This part of IEC 60086 specifies tests and requirements
49、for primary batteries with aqueous electrolyte to ensure their safe operation under intended use and reasonably foreseeable misuse. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1