IEC 60122-3-2010 Quartz crystal units of assessed quality - Part 3 Standard outlines and lead connections《石英振荡器的质量评定.第3部分 标准外框和铅连接件》.pdf

1、 IEC 60122-3 Edition 4.0 2010-10 INTERNATIONAL STANDARD NORME INTERNATIONALE Quartz crystal units of assessed quality Part 3: Standard outlines and lead connections Rsonateurs quartz sous assurance de la qualit Partie 3: Encombrements normaliss et connexions des sorties IEC 60122-3:2010 THIS PUBLICA

2、TION IS COPYRIGHT PROTECTED Copyright 2010 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing fr

3、om either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further informatio

4、n. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de

5、 la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-12

6、11 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The te

7、chnical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of

8、 criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Av

9、ailable on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electr

10、otechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos

11、de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de

12、la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant dif

13、frents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les

14、nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les

15、 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou conta

16、ctez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 60122-3 Edition 4.0 2010-10 INTERNATIONAL STANDARD NORME INTERNATIONALE Quartz crystal units of assessed quality Part 3: Standard outlines and lead connections Rsonateurs quartz sous assurance de la qualit Partie 3: Encombre

17、ments normaliss et connexions des sorties INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE T ICS 31.140 PRICE CODE CODE PRIX ISBN 978-2-88912-211-0 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique

18、 Internationale 2 60122-3 IEC:2010 CONTENTS FOREWORD.3 INTRODUCTION.5 1 Scope.6 2 Guidance for the standardization of outline drawings for frequency control and selection devices6 2.1 General .6 3 Dimensions of quartz crystal unit enclosures 7 4 Designation of quartz crystal unit enclosures8 Bibliog

19、raphy24 Figure 1 Guidance for outline drawings7 Table 1 Designation of quartz crystal unit enclosures.8 60122-3 IEC:2010 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ QUARTZ CRYSTAL UNITS OF ASSESSED QUALITY Part 3: Standard outlines and lead connections FOREWORD 1) The International Electrotechnica

20、l Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this en

21、d and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Comm

22、ittee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in ac

23、cordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all

24、interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held res

25、ponsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any diverge

26、nce between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC mar

27、ks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual expert

28、s and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Pub

29、lication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Pub

30、lication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60122-3 has been prepared by IEC Technical Committee 49: Piezoelectric, dielectric and electrostatic devices and associated materials for frequenc

31、y control, selection and detection. This fourth edition cancels and replaces the third edition published in 2001. This fourth edition constitutes a technical revision. The main changes with respect to the previous edition are as follows: 12 of the 48 enclosure types contained in the previous edition

32、 have been deleted. 4 60122-3 IEC:2010 The text of this standard is based on the third edition and the following documents: CDV Report on voting 49/886/CDV 49/904/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. T

33、his publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of IEC 60122 series, published under the general title, Quartz crystal units of assessed quality, can be found on the IEC website. The committee has decided that the contents of this publication w

34、ill remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 60122-3 IEC:2010 5 INTRODUCTION The thir

35、d edition of IEC 60122-3 (2004) contained 48 enclosure types showing the dimensional and geometrical characteristics of these enclosures. Since its release, due to progress in technology, many of the enclosures given in the standard have become obsolete. Bearing this in mind, the following 12 enclos

36、ure types have been deleted from the third edition of lEC 60122-3. AA, AB, BC, BC/1, BF, BF/1, CX, CY, CY/1, CZ, DA, DC. Therefore, this new version (the fourth edition) contains the following 36 enclosure types ; CK, CM, CN, CP, DK, DL, DP, EH, DQ, DR, DZ, DV, DW, ED, EB, EJ, EK, CU 01A, CU 01B, CU

37、 01C, CU 01D, CU 01E, CU 01F, CU 02A, CU 02B, CU 02C, CU 02D, CU 02E, CU 02F 6 60122-3 IEC:2010 QUARTZ CRYSTAL UNITS OF ASSESSED QUALITY Part 3: Standard outlines and lead connections 1 Scope This part of IEC 60122 specifies the outline drawing for quartz crystal units with lead enclosures. 2 Guidan

38、ce for the standardization of outline drawings for frequency control and selection devices 2.1 General In order to achieve a uniform presentation of all outline drawings for frequency control and selection devices the following guide shall be considered: 2.2 An outline drawing shall show all dimensi

39、onal and geometrical characteristics of an enclosure necessary to ensure mechanical interchangeability with all other enclosures of the same outline. Enlarged detailed view may be used, if necessary. 2.3 The outline drawing shall consist of three parts: 2.3.1 A drawing with dimensional symbols (capi

40、tal letter) as shown in Figure 1 below with applicable notes, if necessary. 2.3.2 A tabular listing relating to the drawing symbols to the actual dimensions. Where possible this shall be shown on the same page as the drawing. 2.3.3 An “actual-size“ sketch (scale 1:1). 2.4 The outline drawing shall b

41、e executed in the third angle projection. 2.5 The function and identification of the lead connections (termination) shall be determined by agreement between the supplier and user. They shall not be defined on the outline drawing. 2.6 Descriptive notes may be used at the bottom of/ or adjacent to, th

42、e drawing with proper reference to the body of the drawing. 2.7 All dimensions shall be in millimeters. 2.8 Outline dimensions A, B, C, D and E shall be listed with maximum values only. 2.9 Lead (termination) cross-sectional dimensions shall be listed with minimum and maximum values. If applicable,

43、nominal dimensions may be added. 2.10 The spacing of the leads (termination) symbol H shall be listed with minimum, nominal and maximum dimensions. 60122-3 IEC:2010 7 NOTE 1 In this sentence, a comment related to K or to the number X should be notified. NOTE 2 In this sentence, a comment related to

44、U and W or to the number X should be notified Figure 1 Guidance for outline drawings Scale 2 :1 Sheet - number 2.11 If leads (terminations) are provided with an undercut dimensions U and W shall be listed with minimum dimensions only. 3 Dimensions of quartz crystal unit enclosures The dimensions in

45、this standard apply to the competed quartz crystal units. Dimensions (mm) Ref. Min. Nom. Max. Notes A X B X C X D X E X H X X X K X X 1 L X X U X 2 W X 2 E D C L H U W K A B Actual size IEC 2244 / 03 IEC 2256/10 8 60122-3 IEC:2010 Only those dimensions which meet the requirements of the guidance for

46、 standardization of outline drawings are given (see Clause 2). 4 Designation of quartz crystal unit enclosures See Table 1. Table 1 Designation of quartz crystal unit enclosures No. Type Sheet No. Description 1 CK, CM CN, CP Sheet 1 Metal, welded, three-lead crystal unit outline 2 DK Sheet 2 Metal,

47、welded, three-lead crystal unit outline 3 DL Sheet 3 Metal, welded, two-lead crystal unit outline 4 DP EH Sheet 4 Metal, welded, two-lead crystal unit outline 5 DQ Sheet 5 Metal, welded, two-lead crystal unit outline 6 DR Sheet 6 Metal, welded, four-lead crystal unit outline 7 DZ Sheet 7 Metal, weld

48、ed, two-lead crystal unit outline 8 DV Sheet 8 Metal, solder-diffusion-seared, two-lead, two-lead cylindrical unit outline 9 DW Sheet 9 Metal, solder-diffusion-sealed, two-lead cylindrical crystal unit outline 10 ED Sheet 10 Metal, solder-diffusion-sealed, two-lead cylindrical crystal unit outline 1

49、1 EB, EJ, EK Sheet 11 Metal, welded, two-lead crystal unit outline 12 CU 01A. CU 01B. CU 01C. CU 01D. CU 01E. CU 01F. Sheet 12 Metal, welded, two-lead crystal unit outline for automatic handling 13 CU 02A. CU 02B. CU 02C. CU 02D. CU 02E. CU 02F. Sheet 13 Metal, welded, two-lead crystal unit outline for automatic handling 14 CU 04A. CU 04B. CU 04C. CU 04D. Sheet 14 Metal