1、 IEC 60300-3-4Edition 2.0 2007-09INTERNATIONAL STANDARD NORME INTERNATIONALEDependability management Part 3-4: Application guide Guide to the specification of dependability requirements Gestion de la sret de fonctionnement Partie 3-4: Guide dapplication Spcification dexigences de sret de fonctionnem
2、ent IEC60300-3-4:2007 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2007 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm
3、, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member Nationa
4、l Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit
5、 de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Cen
6、tral Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technolog
7、ies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue ena
8、bles you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month
9、 all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Also
10、 known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02
11、11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le cont
12、enu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectu
13、er des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la CEI. Just Publish
14、ed dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions en anglais et en franais, ainsi
15、que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez
16、le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 60300-3-4Edition 2.0 2007-09INTERNATIONAL STANDARD NORME INTERNATIONALEDependability management Part 3-4: Application guide Guide to the specification of dependability requirements Gestion d
17、e la sret de fonctionnement Partie 3-4: Guide dapplication Spcification dexigences de sret de fonctionnement INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE WICS 03.100.40; 03.120.01 PRICE CODECODE PRIXISBN 2-8318-9308-9 2 60300-3-4 IEC:2007 CONTENTS FOREWORD.4 I
18、NTRODUCTION.6 1 Scope.7 2 Normative references .7 3 Terms and definitions .9 4 General considerations for dependability specifications9 4.1 The need for dependability 9 4.2 Requirements and goals11 4.3 Systems 11 4.4 Demonstration of achievement of requirements .13 4.4.1 Concept.13 4.4.2 Activities1
19、4 4.5 Contracting for dependability.15 4.6 Types of specification16 4.7 Derivation of dependability specifications 17 5 Dependability management 18 6 Availability19 6.1 General .19 6.1.1 Choice of dependability characteristic19 6.1.2 Relationship between availability, reliability and maintainability
20、 .19 6.2 Availability specifications.20 6.2.1 Quantitative requirements20 6.2.2 Qualitative requirements20 6.3 Provision of availability verification and validation .20 6.3.1 General .20 6.3.2 Verification and validation by testing21 6.3.3 Verification and validation by analysis .21 7 Reliability .2
21、1 7.1 General .21 7.2 Reliability specification22 7.2.1 Quantitative requirements22 7.2.2 Qualitative requirements23 7.3 Reliability verification and validation24 7.3.1 General .24 7.3.2 Verification and validation by testing24 7.3.3 Verification and validation by analysis .25 8 Maintainability 25 8
22、.1 General .25 8.2 Maintainability specification.25 8.2.1 Quantitative requirements25 8.2.2 Qualitative requirements26 8.3 Maintainability verification and validation.26 9 Maintenance support 27 9.1 General .27 9.2 Maintenance support specification.27 60300-3-4 IEC:2007 3 9.2.1 Quantitative requirem
23、ents27 9.2.2 Qualitative requirements28 9.3 Maintenance support verification and validation 28 Annex A (informative) Reference standards for verification and validation techniques29 Annex B (informative) Examples of reliability, maintainability, maintenance support and availability requirements 31 B
24、ibliography33 Figure 1 Relationship between cost and reliability10 Figure 2 System elements12 Table A.1 Techniques for dependability verification and validation through testing.29 Table A.2 Techniques for dependability verification and validation through analysis.30 4 60300-3-4 IEC:2007 INTERNATIONA
25、L ELECTROTECHNICAL COMMISSION _ DEPENDABILITY MANAGEMENT Part 3-4: Application guide Guide to the specification of dependability requirements FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical commi
26、ttees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical
27、 Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental
28、and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreem
29、ents of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use an
30、d are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote
31、international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated
32、 in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to I
33、EC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and e
34、xpenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) A
35、ttention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60300-3-4 has been prepared by IEC technical committee 56: Dependabi
36、lity. This second edition cancels and replaces the first edition published in 1996 and constitutes a technical revision. The main changes from the previous edition are as follows: the concept of systems has been included and the need to specify the dependability of the system and not just the physic
37、al equipment has been stressed; the need for verification and validation of the requirement has been included; differentiation has been made between requirements, that can be measured and verified and validated, and goals, which cannot; the content on availability, maintainability and maintenance su
38、pport has been updated and expanded to similar level of detail to reliability. 60300-3-4 IEC:2007 5 The text of this standard is based on the following documents: FDIS Report on voting 56/1212/FDIS 56/1233/RVD Full information on the voting for the approval of this standard can be found in the repor
39、t on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of the IEC 60300 series, under the general title Dependability management can be found on the IEC website. The committee has decided that the contents of
40、 this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed; withdrawn; replaced by a revised edition, or amended. 6 60300-3-4
41、IEC:2007 INTRODUCTION In many systems, reliability, maintainability and availability are essential performance characteristics. These characteristics, together with maintenance support performance, are known collectively as dependability. In systems where any of the dependability characteristics are
42、 important, it is necessary that these characteristics should be defined and specified in the same way as other system characteristics such as technical performance, dimensions and mass. The levels of reliability, maintainability, availability and maintenance support performance achieved by a system
43、 depend on the conditions under which the system is used and also on the mission profile of the system. When requirements for dependability characteristics are specified, it is necessary to define the conditions of storage, transportation, installation and use that will be applied to the system. It
44、may be important to take account not only of the conditions under which the system will operate, but also of the maintenance policy and organization for maintenance support of the system. In order to assess the values of the dependability characteristics achieved, it is necessary to use statistical
45、methods. Dependability characteristics may be specified, like other performance characteristics, in three different ways: 1) specifications written by the supplier; 2) specifications written by the purchaser; 3) specifications mutually agreed or written by the supplier and the purchaser. This standa
46、rd is applicable to all three types of specification. This standard complements IEC 62347 which deals with the definitions of systems and their constituent elements and how to define these so that the dependability requirements of each element can be specified using this standard. The premise of IEC
47、 62347 is to identify system requirements by functions from a system engineering perspective. It provides a process for transforming the purchasers view on system applications into a technical view for engineering the system. IEC 62347 emphasises architectural and functional design for realisation o
48、f functions with appropriate selection of hardware, software and human elements to achieve the system dependability requirements relevant to the purchasers needs. 60300-3-4 IEC:2007 7 DEPENDABILITY MANAGEMENT Part 3-4: Application guide Guide to the specification of dependability requirements 1 Scop
49、e This part of IEC 60300 gives guidance on specifying the required dependability characteristics in specifications, together with specifications of procedures and criteria for verification and validation. The guidance provided includes the following: advice on specifying quantitative and qualitative reliability, maintainability, availability and maintenance support requirements; advice to p
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1