IEC 60310-2016 Railway applications - Traction transformers and inductors on board rolling stock《轨道交通.铁路车辆用牵引变压器和电感器》.pdf

1、 IEC 60310 Edition 4.0 2016-01 INTERNATIONAL STANDARD NORME INTERNATIONALE Railway applications Traction transformers and inductors on board rolling stock Applications ferroviaires Transformateurs de traction et bobines dinductance bord du matriel roulant IEC 60310:2016-01(en-fr) colour inside THIS

2、PUBLICATION IS COPYRIGHT PROTECTED Copyright 2016 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in wri

3、ting from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further inf

4、ormation. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit nation

5、al de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11

6、3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies.

7、 About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting

8、the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety

9、 of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available onl

10、ine and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotech

11、nical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary 65 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 a

12、nd CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mon

13、diale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corr

14、igendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tabl

15、ettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires.

16、IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lect

17、roniques et lectriques. Il contient 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 15 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary 65 000 entres terminologiques lectr

18、otechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaire

19、s sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 60310 Edition 4.0 2016-01 INTERNATIONAL STANDARD NORME INTERNATIONALE Railway applications Traction transformers and inductors on board rolling stock Applications ferroviaires Transformateurs de traction et bobines

20、dinductance bord du matriel roulant INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 45.060 ISBN 978-2-8322-3107-4 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make

21、 sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. colour inside 2 IEC 60310:2016 IEC 2016 CONTENTS FOREWORD . 6 1 Scope 8 2 Normative references. 8 3 Terms and definitions 9 3.1 Ge

22、neral definitions 10 3.2 Definitions for transformers . 11 3.3 Definitions for inductors . 11 4 Classification . 12 4.1 Classification of transformers 12 4.2 Classification of inductors 12 5 Service conditions . 12 6 Rated current and load profile 13 6.1 Load profile . 13 6.2 Rated current 13 7 Rate

23、d voltage and power of transformer windings . 13 7.1 Rated line-side voltage 13 7.2 Rated secondary voltage . 13 7.3 Rated power of transformer . 14 8 Transformer tappings . 14 9 Cooling 14 9.1 Identification of transformers and inductors according to cooling method 14 9.2 Arrangement of symbols 15

24、9.2.1 Enclosed transformers and inductors 15 9.2.2 Non-enclosed transformers and inductors . 15 9.2.3 Air cooling . 15 10 Temperature limits . 15 10.1 Classification of insulating materials 15 10.2 Temperature limits of solid insulation . 16 10.3 Temperature limits for liquid 16 10.4 Temperature lim

25、its for other parts 17 11 Mechanical design . 17 12 Rating plates . 17 13 Tests . 18 13.1 Categories of tests 18 13.1.1 General . 18 13.1.2 Type tests 18 13.1.3 Routine tests 18 13.1.4 Investigation tests 18 13.2 Tests on transformers . 18 13.2.1 General List of tests 18 13.2.2 Tolerances . 20 13.2.

26、3 Visual checks (type, routine test) and functional tests (optional type and routine test) . 20 13.2.4 Mass (type and optional routine test) 20 13.2.5 Measurement of winding resistance (type and routine tests) 21 IEC 60310:2016 IEC 2016 3 13.2.6 Measurement of voltage ratio, polarities and vector gr

27、oups (type and routine tests) 21 13.2.7 Measurement of no-load primary current and losses (type and routine tests) . 22 13.2.8 Measurement of impedance voltages or short-circuit impedances (type and routine tests) . 22 13.2.9 Measurement of fundamental load losses (type and routine tests) . 23 13.2.

28、10 Determination of total losses (type test) 24 13.2.11 Temperature-rise test (type test) 24 13.2.12 Insulation resistance test (optional type and routine test) 28 13.2.13 Dielectric tests (type and routine tests) . 28 13.2.14 Partial discharge test (type or optional routine test for dry-type, inves

29、tigation test for immersed type) 34 13.2.15 Short-circuit withstand test (optional type test) 36 13.2.16 Shock and vibration test (optional type test) 38 13.2.17 Voltage transmission ratio VTR (optional type test) 40 13.2.18 Noise measurement (type test) . 41 13.2.19 Leakage magnetic flux density me

30、asurement (optional type test) . 41 13.2.20 Electrical Frequency Response Analysis FRA (investigation test) 42 13.2.21 Inrush current measurement (optional type test) . 42 13.3 Tests on inductors . 43 13.3.1 List of tests 43 13.3.2 Tolerances . 43 13.3.3 Visual checks (type and routine test) 44 13.3

31、.4 Mass (type and optional routine test) 44 13.3.5 Measurement of winding resistance (type and routine test) . 44 13.3.6 Determination of losses (type test) . 44 13.3.7 Measurement of inductance (type and routine tests) . 45 13.3.8 Temperature-rise test (type tests) . 48 13.3.9 Insulation resistance

32、 test (optional type and routine test) 48 13.3.10 Dielectric tests (type and routine tests) . 48 13.3.11 Partial discharge test (type or optional routine test for the dry-type) 49 13.3.12 Short-circuit withstand test (optional type test) 49 13.3.13 Shock and vibration test (optional type test) 50 13

33、.3.14 Vibration test with current flowing (investigation test) 50 13.3.15 Noise measurement (type test) . 50 13.3.16 Leakage magnetic flux density measurement (optional type test) . 50 Annex A (informative) List of items for which an agreement between purchaser and manufacturer is needed or for whic

34、h further information or specifications shall be given by the purchaser or by the manufacturer . 51 A.1 Items subject to agreement between purchaser and manufacturer 51 A.1.1 Transformer and inductors . 51 A.1.2 Transformers . 52 A.1.3 Inductors . 53 A.2 Information to be given by purchaser to manuf

35、acturer 54 A.2.1 Transformers and inductors 54 A.2.2 Transformers . 55 A.2.3 Inductors . 55 A.3 Information to be given by manufacturer to purchaser 56 A.3.1 Transformers and inductors 56 4 IEC 60310:2016 IEC 2016 A.3.2 Transformers . 56 A.3.3 Inductors . 56 Annex B (informative) Thermal ageing and

36、insulation life time . 57 B.1 Insulation life time and thermal ageing . 57 B.2 Definitions of thermal endurance . 57 B.3 Thermal endurance calculations 58 B.4 Special considerations for thermal design and test . 59 B.4.1 General . 59 B.4.2 Cooling medium temperature at the external interface . 59 B.

37、4.3 Rated current . 60 B.4.4 Temperature rise test of a dry-type transformer/inductor . 60 B.5 Thermal conformity of the insulation system . 60 B.6 End of life criterion 60 Annex C (informative) Example of thermal endurance calculation to demonstrate the suitability of an insulation system for a spe

38、cified application 61 C.1 Preliminary 61 C.2 Example 1 Temperature limits for a dry-type transformer/inductor 61 C.3 Example 2 Thermal endurance calculation 61 C.3.1 General . 61 C.3.2 Operating conditions to be provided by the purchaser . 62 C.3.3 Thermal endurance characteristics to be provided by

39、 the manufacturer . 62 C.3.4 Temperature rise test results 62 C.3.5 Calculations . 63 Annex D (informative) Wet dielectric tests for dry-type transformers and inductors 65 D.1 General . 65 D.2 Wet test 1 (optional type test or optional routine test): short soaking 65 D.3 Wet test 2 (investigation te

40、st or optional type test): misting 66 D.4 Wet test 3 (investigation test): thermal shock long soaking misting . 66 D.4.1 General . 66 D.4.2 Temperature conditioning . 66 D.4.3 Thermal shock . 66 D.4.4 Dielectric test . 66 D.5 Common test procedure and criteria for wet dielectric tests 66 Annex E (in

41、formative) Load profiles 68 Bibliography . 69 Figure 1 Examples of set up for induced voltage withstanding tests . 31 Figure 2 Examples of set up for separate source voltage withstanding tests 32 Figure 3 Examples of impulse test connections for traction, inductor and auxiliary transformers . 33 Fig

42、ure 4 Partial discharge test: voltage versus time 35 Figure 5 Configurations for VTR test 41 Figure 6 Example of test circuit 42 Table 1 Letter symbols for cooling method 14 Table 2 Order of symbols . 15 Table 3 Temperature limits of solid insulation . 16 IEC 60310:2016 IEC 2016 5 Table 4 Temperatur

43、e limits for liquid . 16 Table 5 List of checks and tests to be made on traction transformers 19 Table 6 Tolerances 20 Table 7 Reference temperatures 21 Table 8 Dielectric test voltage 30 Table 9 Partial discharge measurements 35 Table 10 List of checks and tests to be made on inductors 43 Table 11

44、Tolerances 44 Table 12 Test method of voltage between terminals withstand test 49 Table C.1 Temperature limits and expected lifetime for a dry-type transformer or inductor (examples) 61 Table C.2 Load cycle histogram . 62 Table C.3 Temperature histogram 62 Table C.4 Temperature rise test results 63

45、Table C.5 Thermal endurance calculation . 63 Table C.6 Equivalent current and temperatures 64 6 IEC 60310:2016 IEC 2016 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ RAILWAY APPLICATIONS TRACTION TRANSFORMERS AND INDUCTORS ON BOARD ROLLING STOCK FOREWORD 1) The International Electrotechnical Commissio

46、n (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in ad

47、dition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee inter

48、ested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance w

49、ith conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for internat