1、 IEC 60317-1Edition 4.0 2010-03INTERNATIONAL STANDARD NORME INTERNATIONALESpecifications for particular types of winding wires Part 1: Polyvinyl acetal enamelled round copper wire, class 105 Spcifications pour types particuliers de fils de bobinage Partie 1: Fil de section circulaire en cuivre maill
2、 avec actal de polyvinyle, classe 105 IEC60317-1:2010 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2010 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, incl
3、uding photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below
4、or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et l
5、es microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de
6、 votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical,
7、electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchp
8、ub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just
9、 Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent ter
10、ms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email
11、: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A pro
12、pos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-lign
13、e de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publ
14、ications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions
15、en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si v
16、ous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 60317-1Edition 4.0 2010-03INTERNATIONAL STANDARD NORME INTERNATIONALESpecifications for particular types of winding wires Part 1: Polyvinyl acetal enamelled r
17、ound copper wire, class 105 Spcifications pour types particuliers de fils de bobinage Partie 1: Fil de section circulaire en cuivre maill avec actal de polyvinyle, classe 105 INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE JICS 29.060.10 PRICE CODECODE PRIXISBN 2
18、-8318-1082-6 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale 2 60317-1 IEC:2010 CONTENTS FOREWORD.3 INTRODUCTION.5 1 Scope.6 2 Normative references .6 3 Terms, definitions and general notes on methods of test and app
19、earance 6 3.1 Terms and definitions 6 3.2 General notes on methods of test6 3.3 Appearance.7 4 Dimensions 7 5 Electrical resistance .7 6 Elongation 7 7 Springiness 7 8 Flexibility and adherence7 9 Heat shock .7 9.1 Nominal conductor diameters up to and including 1,600 mm .7 9.2 Nominal conductor dia
20、meters over 1,600 mm 7 10 Cut-through 8 11 Resistance to abrasion (nominal conductor diameters from 0,250 mm up to and including 2,500 mm) .8 12 Resistance to solvents8 13 Breakdown voltage .9 14 Continuity of insulation .9 15 Temperature index .9 16 Resistance to refrigerants.9 17 Solderability .9
21、18 Heat and solvent bonding .9 19 Dielectric dissipation factor.9 20 Resistance to transformer oil 9 21 Loss of mass 9 23 Pin hole test .9 30 Packaging 9 Table 1 Heat shock 7 Table 2 Resistance to abrasion8 60317-1 IEC:2010 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ SPECIFICATIONS FOR PARTICULAR
22、TYPES OF WINDING WIRES Part 1: Polyvinyl acetal enamelled round copper wire, class 105 FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is t
23、o promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and G
24、uides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IE
25、C also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as
26、possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense
27、. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees under
28、take to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any atte
29、station of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition
30、of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct
31、or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable
32、 for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60317-1 has be
33、en prepared by IEC technical committee 55: Winding wires. This fourth edition of IEC 60317-1 cancels and replaces the third edition published in 1990, its Amendment 1 (1997) and Amendment 2 (1997). This edition constitutes a technical revision. The main changes with respect to the previous edition a
34、re as follows: new requirements for appearance; deletion of high temperature failure requirements; new pin hole test requirements. 4 60317-1 IEC:2010 The text of this standard is based on the following documents: FDIS Report on voting 55/1176/FDIS 55/1187/RVD Full information on the voting for the a
35、pproval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. This International Standard is to be read in conjunction with IEC 60317-0-1 (2008). A list of all the parts in the IEC 6031
36、7 series, under the general title Specifications for particular types of winding wires, can be found on the IEC website. The committee has decided that the contents of this amendment and the base publication will remain unchanged until the stability date indicated on the IEC web site under “http:/we
37、bstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 60317-1 IEC:2010 5 INTRODUCTION This Part of IEC 60317 is one of a series which deals with insulated wires used for windings in ele
38、ctrical equipment. The series has three groups describing 1) winding wires and methods of test (IEC 60851) ; 2) specifications for particular types of winding wires (IEC 60317); 3) packaging of winding wires (IEC 60264). 6 60317-1 IEC:2010 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES Part 1:
39、 Polyvinyl acetal enamelled round copper wire, class 105 1 Scope This Part of IEC 60317 specifies the general requirements of enamelled round copper winding wires of class 105 with a sole coating based on polyvinyl acetal resin, which may be modified providing it retains the chemical identity of the
40、 original resin and meets all specified wire requirements. NOTE A modified resin is a resin that has undergone a chemical change, or contains one or more additives to enhance certain performance or application characteristics. Class 105 is a thermal class that requires a minimum temperature index of
41、 105 and a heat shock temperature of at least 155 C. The temperature in degrees Celsius corresponding to the temperature index is not necessarily that at which it is recommended that the wire be operated and this will depend on many factors, including the type of equipment involved. The range of nom
42、inal conductor diameters covered by this standard is as follows: Grade 1: 0,040 mm up to and including 2,500 mm; Grade 2: 0,040 mm up to and including 5,000 mm; Grade 3: 0,080 mm up to and including 5,000 mm. The nominal conductor diameters are specified in Clause 4 of IEC 60317-0-1. 2 Normative ref
43、erences The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60317-0-1:2008, Specifications for pa
44、rticular types of winding wires Part 0-1: General requirements Enamelled round copper wire 3 Terms, definitions and general notes on methods of test and appearance 3.1 Terms and definitions For terms and definitions, see 3.1 of IEC 60317-0-1. In case of inconsistencies between IEC 60317-0-1 and this
45、 standard, IEC 60317-1 shall prevail. 3.2 General notes on methods of test For general notes on methods of test, see 3.2 of IEC 60317-0-1. In case of inconsistencies between IEC 60317-0-1 and this standard, IEC 60317-1 shall prevail. 60317-1 IEC:2010 7 3.3 Appearance See 3.3 of IEC 60317-0-1. 4 Dime
46、nsions See Clause 4 of IEC 60317-0-1. 5 Electrical resistance See Clause 5 of IEC 60317-0-1. 6 Elongation See Clause 6 of IEC 60317-0-1. 7 Springiness See Clause 7 of IEC 60317-0-1. 8 Flexibility and adherence See Clause 8 of IEC 60317-0-1, where the constant K used for the calculation of the number
47、 of revolutions for the peel test shall be 175 mm. 9 Heat shock The minimum heat shock temperature shall be 155 C. 9.1 Nominal conductor diameters up to and including 1,600 mm The coating shall show no crack. The mandrel diameter shall be as specified in Table 1. Table 1 Heat shock Nominal conductor
48、 diameter mm Over Up to and including Elongation before winding on mandrel % Mandrel diameter b 0,050 0,050 1,600 20 a 0,150 mm D aOr to the breaking point of the copper, whichever is less. bD is the overall diameter of the wire. 9.2 Nominal conductor diameters over 1,600 mm See 9.2 of IEC 60317-0-1
49、. 8 60317-1 IEC:2010 10 Cut-through No failure shall occur within 2 min at 170 C. 11 Resistance to abrasion (nominal conductor diameters from 0,250 mm up to and including 2,500 mm) The wire shall meet the requirements given in Table 2. Table 2 Resistance to abrasion Grade 1 Grade 2 Grade 3 Nominal conductor diameter mm Minimum average force to failure N Minimum force to failure of each me
copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1