1、 IEC 60317-47 Edition 2.0 2013-10 INTERNATIONAL STANDARD NORME INTERNATIONALE Specifications for particular types of winding wires Part 47: Aromatic polyimide enamelled rectangular copper wire, class 240 Spcifications pour types particuliers de fils de bobinage Partie 47: Fil de section rectangulair
2、e en cuivre maill avec polyimide aromatique, classe 240 IEC60317-47:2013 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2013 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
3、or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact
4、 the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris
5、 la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit na
6、tional de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publ
7、ishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published.
8、 Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.ie
9、c.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30
10、000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance
11、, please contact the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A pro
12、pos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La recherche avance vous p
13、ermet de trouver des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications d
14、e la CEI. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais
15、 et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-
16、nous: csciec.ch. IEC 60317-47 Edition 2.0 2013-10 INTERNATIONAL STANDARD NORME INTERNATIONALE Specifications for particular types of winding wires Part 47: Aromatic polyimide enamelled rectangular copper wire, class 240 Spcifications pour types particuliers de fils de bobinage Partie 47: Fil de sect
17、ion rectangulaire en cuivre maill avec polyimide aromatique, classe 240 INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE J ICS 29.060.10 PRICE CODE CODE PRIX ISBN 978-2-8322-1137-3 Registered trademark of the International Electrotechnical Commission Marque dpose
18、de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 60317-47 IEC:2013 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope .
19、 6 2 Normative reference . 6 3 Terms, definitions, general notes, and appearance 6 3.1 Terms and definitions 6 3.2 General notes 6 3.2.1 Methods of test 6 3.2.2 Winding wire 6 3.3 Appearance . 7 4 Dimensions . 7 5 Electrical resistance 7 6 Elongation 7 7 Springiness . 7 8 Flexibility and adherence 7
20、 9 Heat shock . 7 10 Cut-through 7 11 Resistance to abrasion . 7 12 Resistance to solvents 7 13 Breakdown voltage . 7 14 Continuity of insulation 8 15 Temperature index 8 16 Resistance to refrigerants . 8 17 Solderability 8 18 Heat or solvent bonding 8 19 Dielectric dissipation factor . 8 20 Resista
21、nce to transformer oil 8 21 Loss of mass 8 23 Pin hole test . 8 30 Packaging. 8 Bibliography 9 60317-47 IEC:2013 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES Part 47: Aromatic polyimide enamelled rectangular copper wire, class 240 FOREWORD 1) The
22、 International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and
23、 electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical com
24、mittees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization f
25、or Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committe
26、e has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is ac
27、curate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regi
28、onal publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in
29、 some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agen
30、ts including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of,
31、or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some o
32、f the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60317-47 has been prepared by IEC technical committee 55: Winding wires. This second edition cancels and replaces th
33、e first edition published in 1997. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: deletion of the “in some countries” statement in the scope; new subclause containing general notes on winding wire
34、, formerly a part of the scope; new subclause containing requirements for appearance; revision to the notes in Clause 19, Dielectric dissipation factor; new Clause 23, Pin hole test. 4 60317-47 IEC:2013 The text of this standard is based on the following documents: FDIS Report on voting 55/1421/FDIS
35、 55/1442/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. This International standard is to be read in conjunction with IEC 6031
36、7-0-2:2013. The numbering of clauses in this standard is not continuous from Clauses 20 and 30 in order to reserve space for possible future wire requirements prior to those for wire packaging. A list of all parts in the IEC 60317 series, published under the general title Specifications for particul
37、ar types of winding wires, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the pu
38、blication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 60317-47 IEC:2013 5 INTRODUCTION This part of IEC 60317 is one of a series of standards which deals with insulated wires used for windings in electrical equipment. The series has three groups describing: 1) Winding
39、wires Test methods (IEC 60851); 2) Specifications for particular types of winding wires (IEC 60317); 3) Packaging of winding wires (IEC 60264). 6 60317-47 IEC:2013 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES Part 47: Aromatic polyimide enamelled rectangular copper wire, class 240 1 Scope Th
40、is part of IEC 60317 specifies the requirements of enamelled rectangular copper winding wire of class 240 with a sole coating of aromatic polyimide resin. The range of nominal conductor dimensions covered by this standard is: width: min. 2,0 mm max. 16,0 mm; thickness: min. 0,80 mm max. 5,60 mm. Wir
41、es of grade 1 and grade 2 are included in this specification and apply to the complete range of conductors. The specified combinations of width and thickness, as well as the specified width/thickness ratio, are given in IEC 60317-0-2. 2 Normative reference The following documents, in whole or in par
42、t, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60317-0-2:2013, Specifications for particular
43、types of winding wires Part 0-2: General requirements Enamelled rectangular copper wire 3 Terms, definitions, general notes, and appearance 3.1 Terms and definitions Subclause 3.1 of IEC 60317-0-2:2013 applies. 3.2 General notes 3.2.1 Methods of test Subclause 3.2.1 of IEC 60317-0-2:2013 applies. In
44、 case of inconsistencies between IEC 60317-0-2: 2013 and this standard, the latter shall prevail. 3.2.2 Winding wire Class 240 is a thermal class that requires a minimum temperature index of 240 and heat shock temperature of at least 260 C. The temperature in degrees Celsius corresponding to the tem
45、perature index is not necessarily that at which it is recommended that the wire be used, and this will depend on many factors, including the type of equipment involved. 60317-47 IEC:2013 7 3.3 Appearance Subclause 3.3 of IEC 60317-0-2:2013 applies. 4 Dimensions Clause 4 of IEC 60317-0-2:2013 applies
46、. 5 Electrical resistance Clause 5 of IEC 60317-0-2:2013 applies. 6 Elongation Clause 6 of IEC 60317-0-2:2013 applies. 7 Springiness Clause 7 of IEC 60317-0-2:2013 applies. 8 Flexibility and adherence Clause 8 of IEC 60317-0-2:2013 applies. For 8.2, the wire for the adherence test shall be stretched
47、 by 10 %. 9 Heat shock Clause 9 of IEC 60317-0-2:2013 applies. The minimum heat shock temperature shall be 260 C. 10 Cut-through Clause 10 of IEC 60317-0-2:2013 applies. 11 Resistance to abrasion Test inappropriate. 12 Resistance to solvents Clause 12 of IEC 60317-0-2:2013 applies. 13 Breakdown volt
48、age Clause 13 of IEC 60317-0-2:2013 applies. The elevated temperature shall be 240 C. 8 60317-47 IEC:2013 14 Continuity of insulation Test inappropriate. 15 Temperature index Clause 15 of IEC 60317-0-2:2013 applies. The minimum temperature index shall be 240. 16 Resistance to refrigerants Test inapp
49、ropriate. 17 Solderability Test inappropriate. 18 Heat or solvent bonding Test inappropriate. 19 Dielectric dissipation factor The dielectric dissipation factor tan shall not exceed 60 104at a frequency of 1 000 Hz. NOTE Test under consideration 20 Resistance to transformer oil Test appropriate, but no requirements specified. 21 Loss of mass Test appropriate, but no requirements specified. 23 Pin hole test Test in
copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1