IEC 60318-3-2014 Electroacoustics - Simulators of human head and ear - Part 3 Acoustic coupler for the calibration of supra-aural earphones used in audiometry《电声学 人的头和耳模拟器 第3部分 用于听力测定计的超听力耳机校正用声耦合.pdf

1、 IEC 60318-3 Edition 2.0 2014-12 INTERNATIONAL STANDARD NORME INTERNATIONALE Electroacoustics Simulators of human head and ear Part 3: Acoustic coupler for the calibration of supra-aural earphones used in audiometry lectroacoustique Simulateurs de tte et doreille humaines Partie 3: Coupleur acoustiq

2、ue pour ltalonnage des couteurs supra-auraux utiliss en audiomtrie IEC 60318-3:2014-12(en-fr) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2014 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by a

3、ny means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this public

4、ation, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique o

5、u mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contac

6、tez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prep

7、ares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have be

8、en published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publicati

9、ons search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to da

10、te on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in Engl

11、ish and French, with equivalent terms in 14 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 55 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause o

12、f IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service

13、Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu tech

14、nique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes inter

15、nationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfren

16、ce, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et

17、 aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 14 langues additionnelles. Egalement appel Voc

18、abulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary Plus de 55 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraite

19、s des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 60318-3 Edition 2.0 2014-12 INTERNATIONAL STANDARD NORME INTERNATIONALE Electroa

20、coustics Simulators of human head and ear Part 3: Acoustic coupler for the calibration of supra-aural earphones used in audiometry lectroacoustique Simulateurs de tte et doreille humaines Partie 3: Coupleur acoustique pour ltalonnage des couteurs supra-auraux utiliss en audiomtrie INTERNATIONAL ELEC

21、TROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE M ICS 17.140.50 PRICE CODE CODE PRIX ISBN 978-2-8322-1930-0 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this

22、 publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 IEC 60318-3:2014 IEC 2014 CONTENTS FOREWORD . 3 1 Scope 5 2 Normative references 5 3 Terms and definitions 5 4 Construction 5 4.1 General . 5 4.2 Cavity dim

23、ensions . 6 4.3 Static pressure equalization 8 4.4 Calibrated pressure type microphone 8 5 Coupling of earphone to acoustic coupler 9 6 Calibration . 9 6.1 Reference environmental conditions . 9 6.2 Method of calibration 10 7 Maximum permitted uncertainty of measurements . 10 Bibliography 12 Figure

24、1 Dimensions of acoustic coupler 7 Figure 2 Coupling of earphone to coupler. 9 Table 1 Height of the coupler as a function of the acoustic volume of the microphone 8 Table 2 Values of maximum permitted uncertainties U maxfor a level of confidence of approximately 95 % 11 IEC 60318-3:2014 IEC 2014 3

25、INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ELECTROACOUSTICS SIMULATORS OF HUMAN HEAD AND EAR Part 3: Acoustic coupler for the calibration of supra-aural earphones used in audiometry FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization compr

26、ising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Stand

27、ards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this prepa

28、ratory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organi

29、zations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form o

30、f recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretatio

31、n by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regio

32、nal publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out b

33、y independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees f

34、or any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the No

35、rmative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held res

36、ponsible for identifying any or all such patent rights. International Standard IEC 60318-3 has been prepared by IEC technical committee 29: Electroacoustics. This second edition cancels and replaces the first edition published in 1998 and constitutes a technical revision. This edition includes the f

37、ollowing significant technical changes with respect to the previous edition: a) adjustment of terms and wording to the other parts of IEC 60318, b) introduction of maximum permitted uncertainties, c) revised requirements for static pressure equalization. 4 IEC 60318-3:2014 IEC 2014 The text of this

38、standard is based on the following documents: CDV Report on voting 29/796/CDV 29/811A/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, P

39、art 2. A list of all the parts in the IEC 60318 series, published under the general title Electroacoustics Simulators of human head and ear can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the

40、 IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IEC 60318-3:2014 IEC 2014 5 ELECTROACOUSTICS SIMULATORS OF HUMAN HEAD AND EAR Part 3: Acoustic coupler

41、 for the calibration of supra-aural earphones used in audiometry 1 Scope This part of IEC 60318 specifies an acoustic coupler for the measurement of supra-aural audiometric earphones in the frequency range from 125 Hz to 8 000 Hz. The sound pressure developed by an earphone is not, in general, the s

42、ame in the coupler as in a persons ear. However, the acoustic coupler can be used as an objective and reproducible means of measuring the output of supra-aural earphones. It can be used for specifying reference equivalent threshold sound pressure levels (RETSPL) for the calibration of audiometers. 2

43、 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendm

44、ents) applies. IEC 61094-1, Measurement microphones Part 1: Specifications for laboratory standard microphones ISO/IEC Guide 98-3, Uncertainty of measurement Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) 3 Terms and definitions For the purpose of this document, the followi

45、ng definition applies: 3.1 acoustic coupler device for measuring the acoustic output of sound sources where the sound pressure is measured by a calibrated microphone coupled to the source by a cavity of predetermined shape and volume which does not necessarily approximate the acoustical impedance of

46、 the normal human ear 4 Construction 4.1 General The coupler consists essentially of a cylindrical cavity whose acoustic transfer impedance is determined by the volume of air in the cavity and its dimensions (see 4.2). A microphone with a diaphragm having high acoustic impedance is located in the ba

47、se of the cylindrical cavity. The coupler shall be made of a material that has no negative influences on its performance. For example it should be acoustically hard and dimensionally stable. The general construction 6 IEC 60318-3:2014 IEC 2014 of the coupler and mounting of the microphone shall aim

48、to reduce the response to vibration of any earphone or to sound outside the cavity. In the following, the specified tolerance shall be reduced by an amount equal to the actual expanded measurement uncertainty of the test laboratory before deciding if a device conforms to this specification. 4.2 Cavi

49、ty dimensions The critical dimensions (see Figure 1) of the coupler are those that determine the shape and volume of the cavity terminated by the microphone, the static pressure equalization mechanism, the upper edge (lip) and the 45 angle. The effective acoustic volume of the coupler shall be 5 780 mm 3 130 mm 3 . The diameter d 1shall be 23,825 mm 0,080 mm. Diameter d 2shall be 18,55 mm 0,16 mm