1、 IEC 60335-2-80 Edition 3.0 2015-04 REDLINE VERSION Household and similar electrical appliances Safety Part 2-80: Particular requirements for fans IEC 60335-2-80:2015-04 RLV(en) colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2015 IEC, Geneva, Switzerland All rights reserved. Unless
2、otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any
3、 questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Gene
4、va 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IE
5、C publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC Inter
6、national Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical com
7、mittee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia -
8、www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossa
9、ry - std.iec.ch/glossary More than 60 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service
10、Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC 60335-2-80 Edition 3.0 2015-04 REDLINE VERSION Household and similar electrical appliances Safety Part 2-80: Particular require
11、ments for fans INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 23.120 ISBN 978-2-8322-2637-7 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained this publication from an authorized distributor. colour inside 2 IEC 60335-2-80:2015 RLV IEC 2015 CONT
12、ENTS FOREWORD . 4 INTRODUCTION . 2 1 Scope 8 2 Normative references 9 3 Terms and definitions 9 4 General requirement 9 5 General conditions for the tests . 9 6 Classification . 10 7 Marking and instructions 10 8 Protection against access to live parts . 11 9 Starting of motor-operated appliances .
13、11 10 Power input and current . 11 11 Heating 11 12 Void . 12 13 Leakage current and electric strength at operating temperature . 12 14 Transient overvoltages 12 15 Moisture resistance . 12 16 Leakage current and electric strength 12 17 Overload protection of transformers and associated circuits 12
14、18 Endurance . 12 19 Abnormal operation . 13 20 Stability and mechanical hazards . 13 21 Mechanical strength 14 22 Construction 14 23 Internal wiring 16 24 Components 16 25 Supply connection and external flexible cords . 16 26 Terminals for external conductors 16 27 Provision for earthing 16 28 Scre
15、ws and connections 17 29 Clearances, creepage distances and solid insulation . 17 30 Resistance to heat and fire 17 31 Resistance to rusting . 17 32 Radiation, toxicity and similar hazards . 17 Annexes . 24 Bibliography 25 Figure 101 Subclause 22.102.1 Example 18 Figure 102 Test pin 19 Figure 103 Su
16、bclause 22.102.2 Example 20 Figure 104 Subclause 22.102.3 Example 21 IEC 60335-2-80:2015 RLV IEC 2015 3 Figure 105 Subclause 22.102.4 Example 22 Figure 106 Subclause 22.102.5 Example 1 . 23 4 IEC 60335-2-80:2015 RLV IEC 2015 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ HOUSEHOLD AND SIMILAR ELECTRICA
17、L APPLIANCES SAFETY Part 2-80: Particular requirements for fans FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
18、 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referr
19、ed to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in
20、this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an internati
21、onal consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable
22、 efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publ
23、ications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity.
24、 Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7
25、) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for co
26、sts (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct appli
27、cation of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. DISCLAIMER This Redline version is not an official IEC Standard
28、 and is intended only to provide the user with an indication of what changes have been made to the previous version. Only the current version of the standard is to be considered the official document. This Redline version provides you with a quick and easy way to compare all the changes between this
29、 standard and its previous edition. A vertical bar appears in the margin wherever a change has been made. Additions and deletions are displayed in red, with deletions being struck through. IEC 60335-2-80:2015 RLV IEC 2015 5 This part of International Standard IEC 60335 has been prepared by IEC techn
30、ical committee 61: Safety of household and similar electrical appliances. This third edition cancels and replaces the second edition published in 2002 including its Amendment 1 (2004) and its Amendment 2 (2008). It constitutes a technical revision. The principal changes in this edition as compared w
31、ith the second edition of IEC 60335-2-80 are as follows (minor changes are not listed): added definition for ceiling fan suspension system (3.102); added instructions for ceiling fan maintenance (7.12); added instructions for ceiling fan installation (7.12.1); added entrapment assessment criteria fo
32、r table and pedestal fan with a fan head that oscillates in the up-down direction (20.102); added requirements for insulation of pre-installed internal wiring used to supply attached luminaires (22.101); added suspension system failure protection requirements for ceiling fans (22.102); added motor b
33、rush wear requirements (27.3). The text of this standard is based on the following documents: FDIS Report on voting 61/4878/FDIS 61/4914/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been d
34、rafted in accordance with the ISO/IEC Directives, Part 2. This part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its amendments. It was established on the basis of the fifth edition (2010) of that standard. NOTE 1 When “Part 1” is mentioned in this standard, it refers to
35、 IEC 60335-1. This part 2 supplements or modifies the corresponding clauses in IEC 60335-1, so as to convert that publication into the IEC standard: Safety requirements for fans. When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies as far as is reasonable. Wh
36、en this standard states “addition”, “modification” or “replacement”, the relevant text in Part 1 is to be adapted accordingly. NOTE 2 The following numbering system is used: subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1; unless notes are in a ne
37、w subclause or involve notes in Part 1, they are numbered starting from 101, including those in a replaced clause or subclause; additional annexes are lettered AA, BB, etc. NOTE 3 The following print types are used: requirements: in roman type; test specifications: in italic type; notes: in small ro
38、man type. Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the associated noun are also in bold. 6 IEC 60335-2-80:2015 RLV IEC 2015 A list of all parts of the IEC 60335 series, under the general title: Household and similar electrical appl
39、iances Safety, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication wi
40、ll be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. NOTE 4 The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period follo
41、wing publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation na
42、tionally not earlier than 12 months or later than 36 months from the date of publication. The following differences exist in the countries indicated below. 6.2: This requirement is not applicable (USA). 7.1: The “T“ marking is not required (USA). 7.12.1: Other mounting heights are specified and have
43、 to be marked on the appliance (USA). 19.7: The addition is not applicable (USA). 20.2: The requirements are different (USA). 21.102: The loads are different (USA). 22.102.1: The requirement is not applicable (USA). 22.102.2: The requirement is not applicable (USA). Figure 101 Example 1: The require
44、ment is not applicable (China, USA). Figure 101 Example 2: The requirement is not applicable (China, USA). Figure 101 Example 3: This requirement is not applicable (MY). Figure 101 Example 4: This requirement is not applicable (MY). Figure 101 Example 5: This requirement is not applicable (MY). Figu
45、re 101 Example 6: This requirement is not applicable (MY). 23.3: Different requirements apply (USA). 24.101: The requirement is not applicable (USA). IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the co
46、rrect understanding of its contents. Users should therefore print this document using a colour printer. IEC 60335-2-80:2015 RLV IEC 2015 7 INTRODUCTION It has been assumed in the drafting of this International Standard that the execution of its provisions is entrusted to appropriately qualified and
47、experienced persons. This standard recognizes the internationally accepted level of protection against hazards such as electrical, mechanical, thermal, fire and radiation of appliances when operated as in normal use taking into account the manufacturers instructions. It also covers abnormal situatio
48、ns that can be expected in practice and takes into account the way in which electromagnetic phenomena can affect the safe operation of appliances. This standard takes into account the requirements of IEC 60364 as far as possible so that there is compatibility with the wiring rules when the appliance
49、 is connected to the supply mains. However, national wiring rules may differ. If an appliance within the scope of this standard also incorporates functions that are covered by another part 2 of IEC 60335, the relevant part 2 is applied to each function separately, as far as is reasonable. If applicable, the influence of one function on the other is taken into account. When a part 2 standard does not include additional requireme
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1