IEC 60384-14-1-2016 Fixed capacitors for use in electronic equipment - Part 14-1 Blank detail specification - Fixed capacitors for electromagnetic interference suppression and conn.pdf

1、 IEC 60384-14-1 Edition 3.0 2016-01 INTERNATIONAL STANDARD NORME INTERNATIONALE Fixed capacitors for use in electronic equipment Part 14-1: Blank detail specification Fixed capacitors for electromagnetic interference suppression and connection to the supply mains Assessment level DZ Condensateurs fi

2、xes utiliss dans les quipements lectroniques Partie 14-1: Spcification particulire-cadre Condensateurs fixes dantiparasitage et raccordement lalimentation Niveau dassurance DZ IEC 60384-14-1:2016-01(en-fr) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2016 IEC, Geneva, Switzerland All rights res

3、erved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. I

4、f you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cett

5、e publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou s

6、i vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.c

7、h About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant

8、review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specific

9、ations, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on

10、 projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leadin

11、g online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary 65 000 electrotechnical

12、 terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your f

13、eedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit

14、, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Appli

15、cation autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche

16、avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles public

17、ations IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient 20 000 termes et dfinitions en anglais et en franais,

18、 ainsi que les termes quivalents dans 15 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary 65 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des pu

19、blications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 6038

20、4-14-1 Edition 3.0 2016-01 INTERNATIONAL STANDARD NORME INTERNATIONALE Fixed capacitors for use in electronic equipment Part 14-1: Blank detail specification Fixed capacitors for electromagnetic interference suppression and connection to the supply mains Assessment level DZ Condensateurs fixes utili

21、ss dans les quipements lectroniques Partie 14-1: Spcification particulire-cadre Condensateurs fixes dantiparasitage et raccordement lalimentation Niveau dassurance DZ INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 31.060.10 ISBN 978-2-8322-3126-5 Registered

22、trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur a

23、gr. 2 IEC 60384-14-1:2016 IEC 2016 CONTENTS FOREWORD . 3 INTRODUCTION . 5 0 Blank detail specification . 5 0.1 General . 5 0.2 Identification of the detail specification 5 0.3 Identification of the capacitor 5 1 General data . 7 1.1 Recommended method(s) of mounting (to be inserted) . 7 1.2 Dimensio

24、ns . 7 1.3 Ratings and characteristics . 7 1.4 Normative references 8 1.5 Marking . 8 1.6 Ordering information . 8 1.7 Certified records of released lots 8 1.8 Additional information (not for inspection purposes) 8 1.9 Additional or increased severities or requirements to those specified in the gene

25、ric and/or sectional specification . 8 2 Inspection requirements 8 Annex A (normative) Declaration of design 14 Table 1 Dimensions . 7 Table 2 Values of capacitance related to voltages and case sizes 7 Table 3 Other characteristics . 8 Table 4 Test schedule for lot-by-lot tests (Groups A and B inspe

26、ction) Assessment level DZ 9 Table 5 Test schedule for periodic tests (Group C inspection) Assessment level DZ . 10 IEC 60384-14-1:2016 IEC 2016 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT Part 14-1: Blank detail specification Fixed capacitors for e

27、lectromagnetic interference suppression and connection to the supply mains Assessment level DZ FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of

28、IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PA

29、S) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising wi

30、th the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as n

31、early as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in t

32、hat sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committ

33、ees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide

34、 any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest

35、 edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whethe

36、r direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indi

37、spensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60384

38、-14-1 has been prepared by IEC technical committee 40: Capacitors and resistors for electronic equipment. This third edition cancels and replaces the second edition published in 2005 and constitutes a technical revision. This edition includes the following significant technical changes with respect

39、to the previous edition: The assessment level has been changed to DZ (zero acceptance). The contents is the same as in old IEC 60384-14-3 with editorial changes. IEC 60384-14-3 has been deleted. 4 IEC 60384-14-1:2016 IEC 2016 The text of this standard is based on the following documents: FDIS Report

40、 on voting 40/2421/FDIS 40/2445/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. A list of all parts in the IEC 60384 series, published under the general title Fixed capacitors for use in electronic equipment, can

41、 be found on the IEC website. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. This International Standard is to be used in conjunction with IEC 60384-1:2016. The committee has decided that the contents of this publication will remain unchanged until the stability

42、 date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IEC 60384-14-1:2016 IEC 2016 5 INTRODUCTION 0 Blank detail specification 0.1 Gene

43、ral This blank detail specification forms the basis for a uniform procedure for a common international safety mark. It implements the approval schedule for safety tests in IEC 60384-14, requires a declaration of design for parameters relevant to safety and indicates conformance tests to be conducted

44、 on every lot prior to its release and requalification tests depending on changes to the declared design. This specification offers the assessment level DZ (zero defects). The use of IEC 60384-14-1, may be more appropriate for components manufactured in mass production, whereas the employment of IEC

45、 60384-14-2 (safety tests only) may be necessary in those cases where approval and requalification tests contribute considerably to the costs of the product. A blank detail specification is a supplementary document to the sectional specification and contains requirements for style, layout and minimu

46、m content of detail specifications. Detail specifications not complying with these requirements may not be considered as being in accordance with IEC specifications, nor shall they so be described. In the preparation of detail specifications the content of 1.4 of the sectional specification shall be

47、 taken into account. 0.2 Identification of the detail specification The first page of the detail specification should have the layout recommended on the next page of this blank detail specification. The numbers between square brackets correspond to the following information which shall be inserted a

48、t the position indicated: 1 The “International Electrotechnical Commission“ or the National Standards Organization under whose authority the detail specification is drafted. 2 The IEC or National Standards number of the detail specification, date of issue and any further information required by the

49、national system. 3 The number and issue number of the IEC, or national, generic, or sectional specification, as relevant. 4 If different from the IEC number, the national number of the detail specification, date of issue and any further information required by the national system, together with any amendment numbers. 0.3 Identification of the capacitor 5 A short description of the type of