IEC 60384-8-2015 Fixed capacitors for use in electronic equipment - Part 8 Sectional specification Fixed capacitors of ceramic dielectric Class 1《电子设备用固定电容器.第8部分 分规范 1级陶瓷介质固定电容器》.pdf

1、 IEC 60384-8 Edition 4.0 2015-03 INTERNATIONAL STANDARD NORME INTERNATIONALE Fixed capacitors for use in electronic equipment Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, Class 1 Condensateurs fixes utiliss dans les quipements lectroniques Partie 8: Spcification intermdia

2、ire: Condensateurs fixes dilectrique en cramique, Classe 1 IEC 60384-8:2015-03(en-fr) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2015 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means

3、, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, p

4、lease contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcaniq

5、ue, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le C

6、omit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and

7、 publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been publi

8、shed. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications sear

9、ch - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on al

10、l new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and

11、French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 60 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC pu

12、blications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre:

13、csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique de

14、s publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes international

15、es, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, text

16、e, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi u

17、ne fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 15 langues additionnelles. Egalement appel Vocabulaire

18、 Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary Plus de 60 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des pu

19、blications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 60384-8 Edition 4.0 2015-03 INTERNATIONAL STANDARD NORME INTERNATIONALE Fixed capacitors

20、 for use in electronic equipment Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, Class 1 Condensateurs fixes utiliss dans les quipements lectroniques Partie 8: Spcification intermdiaire: Condensateurs fixes dilectrique en cramique, Classe 1 INTERNATIONAL ELECTROTECHNICAL COM

21、MISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 31.060.20 ISBN 978-2-8322-2283-6 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distrib

22、utor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 IEC 60384-8:2015 IEC 2015 CONTENTS FOREWORD . 6 1 General . 8 1.1 Scope . 8 1.2 Object . 8 1.3 Normative references 8 1.4 Information to be given in a detail specification . 8 1.4.1 General . 8 1

23、.4.2 Outline drawing and dimensions 9 1.4.3 Mounting . 9 1.4.4 Ratings and characteristics 9 1.4.5 Marking . 10 1.5 Terms and definitions 10 1.6 Marking . 10 1.6.1 General . 10 1.6.2 Marking for code of temperature coefficient . 11 1.6.3 Marking on the body 11 1.6.4 Marking of the packaging . 11 1.6

24、.5 Additional marking . 11 2 Preferred ratings and characteristics . 11 2.1 Preferred characteristics . 11 2.2 Preferred values of ratings 11 2.2.1 Rated temperature . 11 2.2.2 Rated voltage (U R ) 12 2.2.3 Category voltage (U C ) . 12 2.2.4 Preferred values of nominal capacitance and associated tol

25、erance values 12 2.2.5 Temperature coefficient ( ) 12 3 Quality assessment procedures . 16 3.1 Primary stage of manufacture . 16 3.2 Structurally similar components 16 3.3 Certified test records of released lots 16 3.4 Qualification approval . 16 3.4.1 General . 16 3.4.2 Qualification approval on th

26、e basis of the fixed sample size procedure 16 3.4.3 Tests . 17 3.5 Quality conformance inspection 22 3.5.1 Formation of inspection lots . 22 3.5.2 Test schedule 23 3.5.3 Delayed delivery 23 3.5.4 Assessment levels . 23 4 Test and measurement procedures 24 4.1 General . 24 4.2 Visual examination and

27、check of dimensions 24 4.3 Electrical tests 24 4.3.1 Capacitance 24 4.3.2 Tangent of loss angle (tan ) . 25 IEC 60384-8:2015 IEC 2015 3 4.3.3 Insulation resistance (R i ) . 25 4.3.4 Voltage proof . 26 4.4 Temperature coefficient ( ) and temperature cyclic drift of capacitance 27 4.4.1 General . 27 4

28、.4.2 Preliminary drying 27 4.4.3 Measuring conditions . 27 4.4.4 Requirements 27 4.5 Robustness of terminations . 27 4.6 Resistance to soldering heat . 27 4.6.1 General . 27 4.6.2 Initial measurement . 27 4.6.3 Test conditions 27 4.6.4 Final inspection, measurements and requirements. 27 4.7 Solderab

29、ility 28 4.7.1 General . 28 4.7.2 Test conditions 28 4.7.3 Final inspection, measurements and requirements. 28 4.8 Rapid change of temperature (if required) . 28 4.8.1 General . 28 4.8.2 Initial measurement . 28 4.8.3 Test conditions 28 4.8.4 Recovery . 28 4.9 Vibration . 28 4.9.1 General . 28 4.9.2

30、 Test conditions 29 4.9.3 Final inspection, measurements and requirements. 29 4.10 Bump (repetitive shock) 29 4.10.1 General . 29 4.10.2 Initial measurements . 29 4.10.3 Test conditions 29 4.10.4 Final inspection, measurements and requirements. 29 4.11 Shock (non-repetitive shock) . 29 4.11.1 Genera

31、l . 29 4.11.2 Initial measurements . 30 4.11.3 Test conditions 30 4.11.4 Final inspection, measurements and requirements. 30 4.12 Climatic sequence. 30 4.12.1 General . 30 4.12.2 Initial measurements . 30 4.12.3 Dry heat 30 4.12.4 Damp heat, cyclic, Test Db, first cycle . 31 4.12.5 Cold. 31 4.12.6 L

32、ow air pressure 31 4.12.7 Damp heat, cyclic, Test Db, remaining cycles 31 4.13 Damp heat, steady state . 32 4.13.1 General . 32 4.13.2 Initial measurement . 32 4.13.3 Test conditions 32 4.13.4 Recovery . 33 4 IEC 60384-8:2015 IEC 2015 4.13.5 Final inspection, measurements and requirements. 33 4.14 E

33、ndurance 33 4.14.1 General . 33 4.14.2 Initial measurement . 33 4.14.3 Test conditions 33 4.14.4 Recovery . 34 4.14.5 Final inspection, measurements and requirements. 34 4.15 Component solvent resistance (if required) . 34 4.16 Solvent resistance of the marking (if required) 34 Annex A (normative) F

34、igures with limits of variation of capacitance with temperature for certain temperature coefficients and classes 35 Bibliography 43 Figure A.1 : +100 (10 6 /K) . 35 Figure A.2 : 0 (10 6 /K) 36 Figure A.3 : 33 (10 6 /K) . 36 Figure A.4 : 75 (10 6 /K) . 37 Figure A.5 : 150 (10 6 /K) . 37 Figure A.6 :

35、220 (10 6 /K) . 38 Figure A.7 : 330 (10 6 /K) . 38 Figure A.8 : 470 (10 6 /K) . 39 Figure A.9 : 750 (10 6 /K) . 39 Figure A.10 : 1 000 (10 6 /K) 40 Figure A.11 : 1 500 (10 6 /K) 40 Figure A.12 : 2 200 (10 6 /K) 41 Figure A.13 : 3 300 (10 6 /K) 41 Figure A.14 : 4 700 (10 6 /K) 42 Figure A.15 : 5 600

36、(10 6 /K) 42 Table 1 Preferred tolerances on nominal capacitance 12 Table 2 Nominal temperature coefficient and tolerances 13 Table 3 Combination of temperature coefficient and tolerance . 14 Table 4 Sampling plan together with numbers of permissible non-conforming items for qualification approval t

37、ests, assessment level EZ 18 Table 5 Test schedule for qualification approval. 19 Table 6 Lot-by-lot inspection 23 Table 7 Periodic tests 24 Table 8 Tangent of loss angle 25 Table 9 Insulation resistance requirements 26 Table 10 Test voltages for single layer ceramic capacitors . 26 Table 11 Test vo

38、ltages for leaded multilayer ceramic capacitors 26 Table 12 Temperature cyclic drift limits 27 Table 13 Requirements 28 Table 14 Preferred severities (of non-repetitive shock) 30 IEC 60384-8:2015 IEC 2015 5 Table 15 Maximum capacitance change . 30 Table 16 Number of damp heat cycles . 31 Table 17 Fi

39、nal inspection, measurements and requirements 32 Table 18 Test conditions for damp heat, steady state . 32 Table 19 Final inspection, measurements and requirements 33 Table 20 Endurance test conditions . 34 Table 21 Final inspection, measurements and requirements 34 6 IEC 60384-8:2015 IEC 2015 INTER

40、NATIONAL ELECTROTECHNICAL COMMISSION _ FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, Class 1 FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all nati

41、onal electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technica

42、l Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. I

43、nternational, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) Th

44、e formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendati

45、ons for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end u

46、ser. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publicatio

47、n shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent

48、certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any persona

49、l injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publ