IEC 60404-8-8-2017 Magnetic materials - Part 8-8 Specifications for individual materials - Thin electrical steel strip and sheet for use at medium frequencies《磁性材料.第8-8部分 单项材料规范.中频下用薄型电工钢带及薄板》.pdf

1、 IEC 60404-8-8 Edition 2.0 2017-09 INTERNATIONAL STANDARD Magnetic materials Part 8-8: Specifications for individual materials Thin electrical steel strip and sheet for use at medium frequencies IEC 60404-8-8:2017-09(en) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2017 IEC, Geneva, Switzerland

2、 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of t

3、he requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax:

4、+41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publication

5、s The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliograph

6、ical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (referenc

7、e number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a mo

8、nth by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 16 additional languages. Also known as the International Electrotechnical Vocabulary (IEV)

9、 online. IEC Glossary - std.iec.ch/glossary 65 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer

10、 Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC 60404-8-8 Edition 2.0 2017-09 INTERNATIONAL STANDARD Magnetic materials Part 8-8: Specifications for individual materi

11、als Thin electrical steel strip and sheet for use at medium frequencies INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 29.030 ISBN 978-2-8322-4805-8 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained this publication from an authorized distribut

12、or. 2 IEC 60404-8-8:2017 IEC 2017 CONTENTS FOREWORD . 4 1 Scope 6 2 Normative references 6 3 Terms and definitions 7 4 Classification . 7 5 Designation . 7 6 General requirements 7 6.1 Production process . 7 6.2 Form of supply 7 6.3 Delivery condition . 8 6.4 Surface condition 8 6.5 Suitability for

13、cutting . 8 7 Technical requirements . 9 7.1 Magnetic properties 9 7.1.1 Magnetic polarization . 9 7.1.2 Specific total loss 10 7.2 Geometric characteristics and tolerances 10 7.2.1 Thickness 10 7.2.2 Width . 12 7.2.3 Edge camber . 12 7.2.4 Residual curvature . 12 7.2.5 Burr height . 13 7.3 Technolo

14、gical characteristics 13 7.3.1 Density 13 7.3.2 Stacking factor. 13 7.3.3 Number of bends . 13 7.3.4 Insulation coating resistance . 13 8 Inspection and testing 13 8.1 General . 13 8.2 Selection of samples . 14 8.3 Preparation of test specimens . 14 8.3.1 Magnetic properties . 14 8.3.2 Geometrical c

15、haracteristics and tolerances 15 8.3.3 Technological characteristics . 15 8.4 Test methods 15 8.4.1 General . 15 8.4.2 Magnetic properties . 15 8.4.3 Geometrical characteristics and tolerances 16 8.4.4 Technological characteristics . 16 8.5 Retests . 17 9 Marking, labelling and packaging . 17 10 Com

16、plaints 17 11 Information to be supplied by the purchaser 17 Annex A (informative) Optional stacking factor for non-oriented coated products . 18 Annex B (informative) Optional magnetic specifications . 19 IEC 60404-8-8:2017 IEC 2017 3 Annex C (informative) Calculation of density values . 20 Bibliog

17、raphy 21 Table 1 Magnetic and technological characteristics of non-oriented electrical steel strip and sheet 9 Table 2 Magnetic and technological characteristics of grain-oriented electrical steel strip and sheet 10 Table 3 Thickness tolerances . 11 Table 4 Width tolerance of non-oriented strip and

18、sheet . 12 Table 5 Width tolerance of grain oriented electrical steel products . 12 Table A.1 Optional stacking factor for non-oriented coated products . 18 Table B.1 Optional magnetic specifications for non-oriented electrical steel strip and sheet 19 4 IEC 60404-8-8:2017 IEC 2017 INTERNATIONAL ELE

19、CTROTECHNICAL COMMISSION _ MAGNETIC MATERIALS Part 8-8: Specifications for individual materials Thin electrical steel strip and sheet for use at medium frequencies FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national

20、electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Spe

21、cifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. Intern

22、ational, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The for

23、mal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations f

24、or international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user.

25、4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication sha

26、ll be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certi

27、fication bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal inj

28、ury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references

29、cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identi

30、fying any or all such patent rights. International Standard IEC 60404-8-8 has been prepared by IEC technical committee 68: Magnetic alloys and steels. This second edition cancels and replaces the first edition published in 1991. This edition constitutes a technical revision. This edition includes th

31、e following significant technical changes with respect to the previous edition: extension of the range of electrical steels to include the improved grades. IEC 60404-8-8:2017 IEC 2017 5 The text of this International Standard is based on the following documents: CDV Report on voting 68/546/CDV 68/56

32、2/RVC Full information on the voting for the approval of this International Standard can be found in the report on voting indicated in the above table. This document has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all the parts in the IEC 60404 series, under the general

33、 title Magnetic materials, can be found on the IEC website. The committee has decided that the contents of this document will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific document. At this date, the document

34、will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. 6 IEC 60404-8-8:2017 IEC 2017 MAGNETIC MATERIALS Part 8-8: Specifications for individual materials Thin electrical steel strip and sheet for use at medium

35、 frequencies 1 Scope This part of IEC 60404 defines the grades of thin non-oriented electrical steel strip and sheet in nominal thicknesses of 0,05 mm, 0,10 mm, 0,15 mm, 0,20 mm, 0,25 mm, 0,30 mm and 0,35 mm and of thin grain-oriented electrical steel strip and sheet in nominal thicknesses of 0,05 m

36、m, 0,10 mm, 0,15 mm and 0,18 mm. In particular, it gives general requirements, magnetic properties, geometric characteristics and tolerances, technological characteristics, as well as inspection procedures. NOTE For thin non-oriented electrical steel strip and sheet, other nominal thicknesses (i.e.

37、0,12 mm, 0,18 mm, 0,23 mm and 0,27 mm) can be agreed between the manufacturer and the purchaser. This document applies to electrical steel strip and sheet supplied in the finally annealed condition in coils or sheets and intended for the construction of magnetic circuits predominantly used at freque

38、ncies in the range from 100 Hz to 10 kHz. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edi

39、tion of the referenced document (including any amendments) applies. IEC 60050-121, International Electrotechnical Vocabulary Part 121: Electromagnetism (available at http:/www.electropedia.org/) IEC 60050-221, International Electrotechnical Vocabulary Chapter 221: Magnetic materials and components (

40、available at http:/www.electropedia.org/) IEC 60404-2, Magnetic materials Part 2: Methods of measurement of the magnetic properties of electrical steel sheet and strip by means of an Epstein frame IEC 60404-9, Magnetic materials Part 9: Methods of determination of the geometrical characteristics of

41、magnetic steel sheet and strip IEC 60404-10, Magnetic materials Part 10: Methods of measurement of magnetic properties of magnetic steel sheet and strip at medium frequencies IEC 60404-13, Magnetic materials Part 13: Methods of measurement of resistivity, density and stacking factor of electrical st

42、eel strip and sheet ISO 404, Steel and steel products General technical delivery requirements ISO 7799, Metallic materials Sheet and strip 3 mm thick or less Reverse bend test ISO 10474, Steel and steel products Inspection documents IEC 60404-8-8:2017 IEC 2017 7 3 Terms and definitions For the purpo

43、ses of this document, the terms and definitions given in IEC 60050-121 and IEC 60050-221 and the following apply. 3.1 number of bends number of alternate bends possible before the appearance of the first crack in the base metal visible to the naked eye Note 1 to entry The number of bends constitutes

44、 an indication of the ductility of the product. 3.2 edge camber greatest distance between a longitudinal edge of a length of strip or a sheet and the line joining the two extremities of the measured length of this edge Note 1 to entry: See IEC 60404-9. 4 Classification The grades covered by this doc

45、ument are classified according to the maximum value of the specific total loss in watts per kilogram and according to the nominal thickness of the product 1(0,05 mm, 0,10 mm, 0,15 mm, 0,20 mm, 0,25 mm, 0,30 mm and 0,35 mm for non-oriented electrical steel; 0,05 mm, 0,10 mm, 0,15 mm and 0,18 mm for g

46、rain-oriented electrical steel). 5 Designation The steel name comprises the following in the order given: a) the characteristic letters: NO for non-oriented electrical steel; GO for grain-oriented electrical steel; b) one hundred times the nominal thickness of the product, in millimetres; c) the spe

47、cified value of the maximum specific total loss at 1,0 T and the given frequency for non-oriented electrical steel grades. EXAMPLE: NO 20-13: non-oriented strip or sheet in nominal thickness of 0,20 mm with a maximum specific total loss of 13 W/kg at 1,0 T and 400 Hz. 6 General requirements 6.1 Prod

48、uction process The production process of the steel and its chemical composition are left to the discretion of the manufacturer. 6.2 Form of supply The product is supplied in coils in the case of strip and in bundles in the case of sheets. The mass of the coils or the bundles of sheets shall be agree

49、d between the manufacturer and the purchaser at the time of enquiry and order. _ 1In the rest of the document, the word “product” is used to mean “strip and sheet”. 8 IEC 60404-8-8:2017 IEC 2017 The recommended value for the internal diameter of coils is 508 mm; however, another value (e.g. 400 mm) may be agreed for the internal diameter of coils between the manufacturer and the purchaser. The strip shall be of constant width and wound in such a manner