1、 IEC 60412 Edition 3.0 2014-09 INTERNATIONAL STANDARD NORME INTERNATIONALE Nuclear instrumentation Nomenclature (identification) of scintillators and scintillation detectors and standard dimensions of scintillators Instrumentation nuclaire Nomenclature (identification) des scintillateurs et des dtec
2、teurs scintillation et dimensions normalises des scintillateurs IEC 60412:2014-09(en-fr) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2014 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any me
3、ans, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication
4、, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mca
5、nique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez l
6、e Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares
7、and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been pu
8、blished. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications s
9、earch - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on
10、 all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English a
11、nd French, with equivalent terms in 14 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 55 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC
12、 publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centr
13、e: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique
14、 des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internatio
15、nales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, t
16、exte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et auss
17、i une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 14 langues additionnelles. Egalement appel Vocabula
18、ire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary Plus de 55 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des
19、 publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 60412 Edition 3.0 2014-09 INTERNATIONAL STANDARD NORME INTERNATIONALE Nuclear instrum
20、entation Nomenclature (identification) of scintillators and scintillation detectors and standard dimensions of scintillators Instrumentation nuclaire Nomenclature (identification) des scintillateurs et des dtecteurs scintillation et dimensions normalises des scintillateurs INTERNATIONAL ELECTROTECHN
21、ICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE M ICS 27.120 PRICE CODE CODE PRIX ISBN 978-2-8322-1859-4 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publicatio
22、n from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 IEC 60412:2014 IEC 2014 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Nomenclature of scintillation detectors and scintillators . 6 2.1 General . 6 2.2 Configurat
23、ion 6 2.3 Geometry of the scintillator . 6 2.4 Dimensions of the scintillator cross-section in mm 7 2.5 Height of the scintillator in mm 7 2.6 Scintillator material . 7 2.7 Type of entrance window 8 2.8 Type of output window 8 2.9 Type of housing 8 2.10 Diameter of the photomultiplier tube (PMT) in
24、mm . 8 2.11 Extra features of PMT or type of photodiode . 8 2.12 Extra features of scintillation detector . 9 2.13 Type of scintillation detector application 9 Annex A (informative) Standard dimensions of scintillators 11 A.1 Diameters of scintillators . 11 A.2 Heights of scintillators . 11 A.3 Tole
25、rances 12 Table A.1 Diameters of scintillators 11 Table A.2 Heights of scintillators 12 IEC 60412:2014 IEC 2014 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ NUCLEAR INSTRUMENTATION NOMENCLATURE (IDENTIFICATION) OF SCINTILLATORS AND SCINTILLATION DETECTORS AND STANDARD DIMENSIONS OF SCINTILLATORS FO
26、REWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the e
27、lectrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to
28、technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International
29、Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each tech
30、nical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publ
31、ications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their nat
32、ional and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment se
33、rvices and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, se
34、rvants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publica
35、tion, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibili
36、ty that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60412 has been prepared by IEC technical committee 45: Nuclear instrumentation. This third edition can
37、cels and replaces the second edition published in 2007. It constitutes a technical revision. The main technical changes with regard to the previous edition are as follows: Nomenclature of scintillation detectors was expanded by phoswich detector and single-line multi-channel detector. Some missing p
38、ositions in the nomenclature of the previous edition were filled out. 4 IEC 60412:2014 IEC 2014 The text of this standard is based on the following documents: FDIS Report on voting 45/777/FDIS 45/780/RVD Full information on the voting for the approval of this standard can be found in the report on v
39、oting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the d
40、ata related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IEC 60412:2014 IEC 2014 5 INTRODUCTION Recently each manufacturer of scintillation detectors has been offering its own nomenclature presenting in it, in t
41、he first place, their trademarks and introducing their own abbreviations (identification). The nomenclature of scintillators and scintillation detectors is quite complicated and usually includes type of detector, scintillators material, geometry and dimensions of scintillator, materials of housing a
42、nd window, type and dimensions of photomultiplier tube or photodiode, presence of additional electronic devices and some other characteristics. Different manufacturers offer different content and different order of characteristic designations in the identifiers of their products. This makes percepti
43、on by a customer of the meaning of symbols in these identifiers difficult. The situation can be improved through introducing a uniform system of nomenclature (identification) of scintillators and scintillation detectors. For this purpose it is advisable to use designations of separate parameters in
44、a strict order, guided by a principle: from the main parameters to secondary ones. This approach will introduce uniformity into the system of nomenclature (identification) of scintillators and scintillation detectors, as well as facilitate the perception of this system and correct selection of produ
45、cts by the customer. 6 IEC 60412:2014 IEC 2014 NUCLEAR INSTRUMENTATION NOMENCLATURE (IDENTIFICATION) OF SCINTILLATORS AND SCINTILLATION DETECTORS AND STANDARD DIMENSIONS OF SCINTILLATORS 1 Scope This International Standard gives guidelines for scintillation detectors and scintillators nomenclature (
46、identification) and standard dimensions of scintillators. This International Standard is applicable to all types of solid organic and inorganic scintillators used in detectors for scintillation counting and spectrometry. The object of this standard is to define a standardized nomenclature for scinti
47、llation detectors in which most of the properties can be found. The object of this standard is to standardize the dimensions of bare scintillators in order to facilitate interchangeability of non-encapsulated scintillators and to facilitate intercomparisons of measurements with encapsulated scintill
48、ators. Liquid scintillators are not addressed by this standard. NOTE The identification labels laid down in Clause 2 of the present standard include certain dimensions which may be expressed in millimetres or inches. The SI system recommends the use of millimetres rather than inches. 2 Nomenclature
49、of scintillation detectors and scintillators 2.1 General The identification of a scintillation detector is specified by a predefined sequence of specification items described below. Each specification item refers to a specific property of the detector material and/or construction. The general structure of an identification label includes symbols, described in 2.2 to 2.13, and given in the same order in which these subclauses
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1