1、 IEC 60432-3 Edition 2.0 2012-07INTERNATIONAL STANDARD NORME INTERNATIONALE Incandescent lamps Safety specifications Part 3: Tungsten halogen lamps (non-vehicle) Lampes incandescence Prescriptions de scurit Partie 3: Lampes tungstne-halogne (vhicules excepts) IEC60432-3:2012 THIS PUBLICATION IS COPY
2、RIGHT PROTECTED Copyright 2012 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IE
3、C or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de
4、 reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du p
5、ays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de V
6、aremb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC
7、publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to
8、find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new pu
9、blications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. A
10、lso known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electro
11、technique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Ve
12、uillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La recherche avance vous permet de trouver des publications CEI en utilisant diffrents critres (numro de rfrence, texte, co
13、mit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications de la CEI. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi
14、une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel
15、Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 60432-3 Edition 2.0 2012-07 INTERNATIONAL STANDARDNORME INTERNATIONALE Incan
16、descent lamps Safety specifications Part 3: Tungsten halogen lamps (non-vehicle)Lampes incandescence Prescriptions de scurit Partie 3: Lampes tungstne-halogne (vhicules excepts)INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE V ICS 29.140.20 PRICE CODE CODE PRIXIS
17、BN 978-2-83220-197-8 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette p
18、ublication via un distributeur agr. 2 60432-3 IEC:2012 CONTENTS FOREWORD . 4 1 General 6 1.1 Scope 6 1.2 Normative references 6 1.3 Terms and definitions 7 2 Requirements . 9 2.1 General . 9 2.2 Marking . 10 2.2.1 Lamp marking 10 2.2.2 Additional information and marking 10 2.3 Caps or bases . 11 2.3
19、1 General . 11 2.3.2 Creepage distances . 11 2.3.3 Dimensions 11 2.4 Photobiological safety 12 2.5 Gas pressure of low-pressure self-shielded extra low voltage lamps . 12 2.6 Safety at end of life of self-shielded lamps with rated voltages from range B or C . 12 2.7 Information for luminaire design
20、 . 12 3 Assessment 13 3.1 General . 13 3.2 Whole production assessment by means of manufacturers records . 13 3.2.1 Assessment of manufacturers records for particular tests 17 3.2.2 Sampling procedures for the whole production testing 17 3.3 Assessment of batches 18 3.3.1 Sampling for batch testing
21、18 3.3.2 Number of lamps in the batch sample 18 3.3.3 Sequence of the tests 18 3.3.4 Rejection conditions of batches 18 Annex A (normative) Symbols. 19 Annex B (normative) Method of testing the gas-pressure 21 Annex C (informative) Information for luminaire design . 22 Annex D (normative) Conditions
22、 of compliance for design tests 28 Annex E (informative) Bulb wall temperature measurement. 29 Annex F (normative) Induced failure test 30 Bibliography 32 Table 1 Grouping of test records Sampling and acceptable quality levels (AQL) 14 Table 2 Acceptance numbers AQL = 0,25 % . 15 Table 3 Acceptance
23、numbers AQL = 0,65 % . 15 Table 4 Acceptance numbers AQL = 2,5 % . 16 Table 5 Batch sample size and rejection number 18 Table C.1 Fuse values for general purpose ELV tungsten halogen lamps 23 Table C.2 Fuse values for photographic lamps 24 60432-3 IEC:2012 3 Table C.3 List of maximum bulb temperatur
24、es 24 Table C.4 Maximum base-pin temperatures 25 Table C.5 Maximum contact temperatures 26 Table C.6 Maximum reflector-rim temperatures 26 4 60432-3 IEC:2012 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ INCANDESCENT LAMPS SAFETY SPECIFICATIONS Part 3: Tungsten halogen lamps (non-vehicle) FOREWORD 1)
25、The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical
26、and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical
27、committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organizatio
28、n for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical commi
29、ttee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is
30、 accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and r
31、egional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and,
32、 in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or a
33、gents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use o
34、f, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that som
35、e of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60432-3 has been prepared by subcommittee 34A: Lamps, of IEC technical committee 34: Lamps and related equipment.
36、 This second edition of IEC 60432-3 cancels and replaces the first edition published in 2002, Amendment 1 (2005) and Amendment 2 (2008). The document 34A/1567/FDIS, circulated to the National Committees as Amendment 3, led to the publication of this new edition. The main changes with respect to the
37、previous edition are as follows: adapting the cold fill pressure requirements and tests for self-shielded lamps to the state of the technology, introduction of requirements to fully cover photobiological safety according to IEC 62471. 60432-3 IEC:2012 5 The text of this standard is based on the firs
38、t edition, its Amendments 1 and 2, and the following documents: FDIS Report on voting 34A/1567/FDIS 34A/1585/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with th
39、e ISO/IEC Directives, Part 2. A list of all the parts in the IEC 60432 series, published under the general title Incandescent lamps Safety specifications can be found on the IEC website. The committee has decided that the contents of the base publication and its amendments will remain unchanged unti
40、l the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 6 60432-3 IEC:2012 INCANDESCENT LAMPS SAFETY SPECIFICATI
41、ONS Part 3: Tungsten halogen lamps (non-vehicle) 1 General 1.1 Scope This part of IEC 60432 specifies the safety requirements for single-capped and double-capped tungsten halogen lamps, having rated voltages of up to 250 V, used for the following applications: projection (including cinematograph and
42、 still projection), photographic (including studio), floodlighting, special purpose, general purpose, stage lighting, This International Standard does not apply to general purpose single-capped tungsten halogen lamps, covered by IEC 60432-2, that are used as replacement for conventional tungsten fil
43、ament lamps. This part of IEC 60432 covers photobiological safety according to IEC 62471 and IEC/TR 62471-2. Lamps covered by this part of IEC 60432 do not reach risk levels that require risk group marking if they are a) floodlight lamps, b) general purpose capsule lamps, or c) general purpose refle
44、ctor lamps. 1.2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (inclu
45、ding any amendments) applies. IEC 60050-845, International Electrotechnical Vocabulary Part 845: Lighting Available from: http:/www.electropedia.org/ IEC 60061-1, Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp caps IEC 60061-3, Lamp caps and
46、holders together with gauges for the control of interchangeability and safety Part 3: Gauges IEC 60061-4, Lamp caps and holders together with gauges for the control of interchangeability and safety Part 4: Guidelines and general information IEC 60357, Tungsten halogen lamps (non-vehicle) Performance
47、 specifications 60432-3 IEC:2012 7 IEC 60432-1:1999, Incandescent lamps Safety specifications Part 1: Tungsten filament lamps for domestic and similar general lighting purposes IEC 62471, Photobiological safety of lamps and lamp systems IEC/TR 62471-2, Photobiological safety of lamps and lamp system
48、s Part 2: Guidance on manufacturing requirements relating to non-laser optical radiation safety 1.3 Terms and definitions For the purposes of this document, the terms and definitions given in IEC 60050-845 as well as the following apply. 1.3.1 tungsten halogen lamp gas-filled lamp containing halogen
49、s or halogen compounds, the filament being of tungsten 1.3.2 single-capped tungsten halogen lamp tungsten halogen lamp having a single cap or base 1.3.3 double-capped tungsten halogen lamp tungsten halogen lamp having a cap or base on each end of the lamp 1.3.4 extra low voltage tungsten halogen lamp tungsten halogen lamp with a rated voltage lower than 50 V Note 1 t
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1