IEC 60456-2010 Clothes washing machines for household use - Methods for measuring the performance《家用洗衣机.性能测量的方法》.pdf

1、 IEC 60456 Edition 5.0 2010-02 INTERNATIONAL STANDARD Clothes washing machines for household use Methods for measuring the performance IEC 60456:2010(E) colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2010 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no p

2、art of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copy

3、right or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC Th

4、e International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC.

5、 Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives infor

6、mation on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The wor

7、lds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/cu

8、stserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 60456 Edition 5.0 2010-02 INTERNATIONAL STANDARD Clothes washing machines for hous

9、ehold use Methods for measuring the performance INTERNATIONAL ELECTROTECHNICAL COMMISSION XG ICS 97.060 PRICE CODE ISBN 978-2-88910-196-2 Registered trademark of the International Electrotechnical Commission colour inside 2 60456 IEC:2010(E) CONTENTS FOREWORD.7 1 Scope.9 2 Normative references .9 3

10、Terms, definitions and symbols 10 3.1 Terms and definitions 10 3.2 Symbols 13 3.2.1 Symbols relating to Subclause 9.2 washing performance13 3.2.2 Symbols relating to Sublause 9.3 water extraction (spinning) .14 3.2.3 Symbols relating to Subclause 9.4 rinsing performance14 3.2.4 Symbols relating to S

11、ubclause 9.5 energy, water and time .14 3.2.5 Symbols relating to Clause 10 wool shrinkage14 3.2.6 Symbols relating to Annex G .15 3.2.7 Symbols relating to Annex I.15 3.2.8 Symbols relating to Annex L 15 4 Requirements.15 4.1 General .15 4.2 Rated capacity 16 4.3 Dimensions .16 5 Test conditions, m

12、aterials, equipment and instrumentation.17 5.1 General .17 5.2 Ambient conditions17 5.2.1 Electricity supply .17 5.2.2 Water supply .17 5.2.3 Ambient temperature and humidity 18 5.3 Test materials .19 5.3.1 General .19 5.3.2 Base loads 19 5.3.3 Stain test strips .19 5.3.4 Wool shrinkage specimens 20

13、 5.3.5 Detergents.20 5.4 Equipment.20 5.4.1 General .20 5.4.2 Reference machine21 5.4.3 Spectrophotometer 21 5.4.4 Equipment for conditioning the base load 22 5.4.5 Standard extractor.22 5.4.6 Iron for preparation of stain test strips after washing .23 5.4.7 Titration equipment23 5.4.8 Other equipme

14、nt23 5.5 Instrumentation and accuracy24 5.5.1 General .24 5.5.2 Instruments .24 5.5.3 Measurements.25 6 Preparation for testing25 6.1 General .25 6.2 Test washing machine and reference machine preparation25 60456 IEC:2010(E) 3 6.2.1 Test washing machine .25 6.2.2 Reference machine26 6.3 Detergent 26

15、 6.3.1 General .26 6.3.2 Detergent dose27 6.3.3 Mixing detergent27 6.3.4 Detergent placement .27 6.4 Test loads .28 6.4.1 General .28 6.4.2 Pre-treatment of new base load items prior to use .30 6.4.3 Requirements regarding the age of base load items 30 6.4.4 Normalization of base load items before a

16、 new test series.31 6.4.5 Conditioning of base load items before a new test series.32 6.4.6 Test load composition33 6.4.7 Addition of stain test strips or wool shrinkage specimens to the base load.36 7 Performance measurements general requirements 37 8 Tests for performance 38 8.1 General .38 8.2 Te

17、st procedure for performance tests 38 8.2.1 Test conditions, materials and preparation for testing38 8.2.2 Test load and loading 39 8.2.3 Programme39 8.2.4 Test procedure 39 8.2.5 Test series 40 8.3 Measurements to determine washing performance 42 8.3.1 General .42 8.3.2 Removal and drying of stain

18、test strips 42 8.3.3 Assessment of stain test strips 42 8.4 Measurements to determine water extraction performance 43 8.4.1 General .43 8.4.2 Washing machines 43 8.4.3 Spin extractors 43 8.5 Measurements to determine rinsing performance 44 8.5.1 General .44 8.5.2 Spin extraction and sampling.44 8.5.

19、3 Alkalinity measurements45 8.6 Measurements to determine water and energy consumption and programme time.46 8.6.1 General .46 8.6.2 Procedure46 9 Assessment of performance .47 9.1 General .47 9.2 Evaluation of washing performance .47 9.3 Evaluation of water extraction performance.49 9.4 Evaluation

20、of rinsing performance .50 9.4.1 General .50 9.4.2 Calculations.50 9.4.3 Evaluation .50 4 60456 IEC:2010(E) 9.5 Evaluation of water and energy consumption and programme time51 9.5.1 General .51 9.5.2 Water volumes 51 9.5.3 Programme time 51 9.5.4 Energy consumption51 10 Shrinkage during the wool was

21、h programme.53 10.1 General .53 10.2 Overview.53 10.2.1 General .53 10.2.2 Determination of reference shrinkage 53 10.3 Procedure .53 10.3.1 Preparation of wool shrinkage specimens53 10.3.2 Wool programme test 55 10.3.3 Evaluation .56 11 Data to be reported 57 Annex A (normative) Specification of st

22、ain test strips with standardized soiling58 Annex B (normative) Reference detergent A*.62 Annex C (normative) Specifications for base loads 64 Annex D (normative) Reference machine specification.67 Annex E (normative) Reference machine programme definitions72 Annex F (informative) Reference programm

23、es and examples of comparable washing machine programmes .75 Annex G (normative) The bone-dry method of conditioning 76 Annex H (normative) Folding and loading the test load 78 Annex I (normative) Calculation of weighted average age of the cotton base load95 Annex J (normative) Loading a large stand

24、ard extractor (rinsing performance) 97 Annex K (informative) Laboratory internal testing guide .101 Annex L (normative) Measurement of energy consumption in low power modes of washing machines 106 Annex M (normative) Testing procedure for manual washing machines109 Annex N (normative) Procedure to d

25、etermine test load size where rated capacity is not declared111 Annex O (informative) Additional evaluation of washing performance.113 Annex P (informative) Testing deviations to reduce costs and their limitations .118 Annex Q (informative) Uncertainty of measurements in IEC 60456 124 Annex R (infor

26、mative) Environmental aspects of washing machine use determined in IEC 60456 127 Annex S (normative) Test report data to be reported.130 Annex T (normative) Wool shrinkage specimens138 Annex U (informative) Sources of materials and supplies.139 Bibliography140 Figure 1 Load item preparation prior to

27、 a test series 29 Figure 2 Load composition and age requirements 30 Figure 3 Attached test strip37 Figure 4 Test series: process and decisions for load mass and age .41 60456 IEC:2010(E) 5 Figure 5 Positions for measuring soiled test pieces43 Figure 6 Wool shrinkage specimen, uncut54 Figure 7 Wool s

28、hrinkage specimen, fraying the edges and V-cuts 54 Figure 8 Wool shrinkage specimen, marks .55 Figure H.1 Folding towel with a stain test strip attached.78 Figure H.2 Folding towel without a stain test strip attached79 Figure H.3 Folding pillowcases 79 Figure H.4 Folding bed sheets .79 Figure H.5 Fo

29、lding pillowcases with a stain test strip attached .80 Figure H.6 Folding pillowcases without a stain test strip attached 80 Figure H.7 Folding shirts81 Figure H.8 Illustration of horizontal axis washing machine .81 Figure H.9 Illustration of vertical axis washing machine .82 Figure H.10 Horizontal

30、axis washing machine: placement of items in the drum 83 Figure H.11 Vertical axis washing machine: placement of items in the drum 83 Figure H.12 Horizontal axis washing machine: illustration of alternating orientation .85 Figure H.13 Placement of 2 towels with strips in one layer for load sizes larg

31、er than 10 kg 87 Figure H.14 Vertical axis washing machines, four quadrants (plan view)90 Figure I.1 Example for the exchange of load items for a 5 kg cotton load .96 Figure J.1 Example of a large standard extractor .97 Figure J.2 View from the top: loading the large standard extractor .97 Figure J.

32、3 Areas for loading.98 Figure J.4 Folding of items.98 Figure J.5 3 areas of loading .99 Figure J.6 Outer circle .99 Figure J.7 Outer circle .99 Figure J.8 Middle circle100 Figure J.9 Inner circle 100 Figure J.10 Towels covering the load.100 Table 1 Detergent dose27 Table 2 Number of items in the cot

33、ton test load for various test load masses.34 Table 3 Number of items in the synthetics/blends test load for various test load masses.35 Table 4 Number of items in the wool programme test load for various test load masses.36 Table A.1 Ratios and tolerances of standardized soils, Reference Machine CL

34、S and MP Lab.61 Table B.1 Composition of the reference detergent A*.62 Table C.1 Specification of the cotton base load items 64 Table C.2 Specification of the synthetics/blends base load items.66 Table D.1 Description of the reference washing machine and method of use type 1.68 Table D.2 Description

35、 of the reference washing machine and method of use type 2.70 6 60456 IEC:2010(E) Table D.3 Programmed volume for type 2 reference machine 71 Table E.1 Specification of reference washing programmes.73 Table E.2 Tolerances given for some procedure parameters74 Table F.1 Reference programmes and examp

36、les of comparable washing machine programmes75 Table H.1 Vertical axis washing machines, loading sequence example for a synthetics/blends load 84 Table H.2 Horizontal axis washing machines, loading sequence 86 Table H.3 Horizontal axis washing machine, loading example (5 kg)88 Table H.4 Vertical axi

37、s washing machines, small loads without sheets (1,0 kg to 2,5 kg) .90 Table H.5 Vertical axis washing machines, medium loads with two sheets (3,0 kg to 7,0 kg) 91 Table H.6 Vertical axis washing machines, large loads with three sheets (7,5 kg to 8,5 kg) 92 Table H.7 Vertical axis washing machines, v

38、ery large loads with four sheets (9,0 kg to 10,0 kg) 93 Table H.8 Vertical axis washing machine loading example (5 kg)94 Table S.1 Data for test washing machine .130 Table S.2 Data, parameters and performance results, cotton or synthetics/blends base loads 132 Table S.2a Data, parameters and results

39、, cotton or synthetics/blends base loads132 Table S.2b Performance results, cotton or synthetics/blends base loads133 Table S.3 Data, parameters and results wool shrinkage polyester base load134 Table S.4 Weighted average age cotton load 135 Table S.5 Materials136 Table S.6 Equipment .137 60456 IEC:

40、2010(E) 7 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ CLOTHES WASHING MACHINES FOR HOUSEHOLD USE METHODS FOR MEASURING THE PERFORMANCE FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (

41、IEC National Committees). The object of IEC is to promote interna- tional co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Techni- cal Re

42、ports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and

43、 non-governmental organiza- tions liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Or- ganization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agree

44、ments of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all inter- ested IEC National Committees. 3) IEC Publications have the form of recommendations for international use

45、 and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinter- pretation by any end user. 4) In order to pro

46、mote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence be- tween any IEC Publication and the corresponding national or regional publication shall be clearly in

47、dicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies.

48、 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property da

49、mage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and ex- penses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publica- tions. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for th