IEC 60488-1-2004 Higher performance protocol for the standard digital interface for programmable instrumentation - Part 1 General《可编程序设备的标准数字接口高效协议.第1部分 总则》.pdf

1、 INTERNATIONAL STANDARD IEC 60488-1First edition 2004-07IEEE 488.1 Higher performance protocol for the standard digital interface for programmable instrumentation Part 1: General Reference number IEC 60488-1(E):2004 IEEE Std. 488.1(E):2003 Publication numbering As from 1 January 1997 all IEC publica

2、tions are issued with a designation in the 60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1. Consolidated editions The IEC is now publishing consolidated versions of its publications. For example, edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the

3、 base publication incorporating amendment 1 and the base publication incorporating amendments 1 and 2. Further information on IEC publications The technical content of IEC publications is kept under constant review by the IEC, thus ensuring that the content reflects current technology. Information r

4、elating to this publication, including its validity, is available in the IEC Catalogue of publications (see below) in addition to new editions, amendments and corrigenda. Information on the subjects under consideration and work in progress undertaken by the technical committee which has prepared thi

5、s publication, as well as the list of publications issued, is also available from the following: IEC Web Site (www.iec.ch) Catalogue of IEC publications The on-line catalogue on the IEC web site (www.iec.ch/searchpub) enables you to search by a variety of criteria including text searches, technical

6、committees and date of publication. On-line information is also available on recently issued publications, withdrawn and replaced publications, as well as corrigenda. IEC Just Published This summary of recently issued publications (www.iec.ch/online_news/ justpub) is also available by email. Please

7、contact the Customer Service Centre (see below) for further information. Customer Service Centre If you have any questions regarding this publication or need further assistance, please contact the Customer Service Centre: Email: custserviec.ch Tel: +41 22 919 02 11 Fax: +41 22 919 03 00 Higher perfo

8、rmance protocol for the standard digital interface for programmable instrumentation Part 1: General INTERNATIONAL STANDARD IEC 60488-1First edition 2004-07IEEE 488.1 Commission Electrotechnique Internationale International Electrotechnical Commission Copyright IEEE 2004 All rights reserved IEEE is a

9、 registered trademark in the U.S. Patent any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with

10、the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjec

11、ts since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical c

12、ontent of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent pos

13、sible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equi

14、pment declared to be in conformity with an IEC Publication. 6) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC/IEEE

15、 60488-1 has been processed through subcommittee 65C: Digital communications, of IEC technical committee 65: Industrial-process measurement and control. This standard cancels and replaces the second edition of IEC 60625-1 (1993). At times in this standard, specific reference is made to IEEE Std 488.

16、1-1987, which constituted an earlier version of IEEE Std 488.1-2003, the IEEE edition upon which this standard is based. Where specific dated references were made to the 1987 edition, these references have been maintained. Furthermore, it is to be noted that full compatibility of this standard with

17、IEC/IEEE 60488- 2:2004 requires implementation of all revisions indicated previously in the IEEE Introduction. Therefore, readers of this standard are encouraged to read also the companion standard IEEE Std 488.2-1987, which constitutes an earlier edition of IEC 60488-2:2004. The text of this standa

18、rd is based on the following documents: IEEE Std FDIS Report on voting 488.1 (2003) 65C/319A/FDIS 65C/343/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. IEC 60488-1:2004(E) IEEE 488.1-2003(E) 4 Published by IEC

19、under licence from IEEE. 2003 IEEE. All rights reserved. This publication has been drafted in accordance with the ISO/IEC Directives. The committee has decided that the contents of this publication will remain unchanged until 2009. IEC/IEEE 60488 consists of the following publications: Higher perfor

20、mance protocol for the standard digital interface for programmable instrumentation Part 1: General (60488-1). Standard digital interface for programmable instrumentation Part 2: Codes, formats, protocols and common commands (60488-2). IEC 60488-1:2004(E) IEEE 488.1-2003(E) 5 Published by IEC under l

21、icence from IEEE. 2003 IEEE. All rights reserved. IEC/IEEE Dual Logo International Standards This Dual Logo International Standard is the result of an agreement between the IEC and the Institute of Electrical and Electronics Engineers, Inc. (IEEE). The original IEEE Standard was submitted to the IEC

22、 for consideration under the agreement, and the resulting IEC/IEEE Dual Logo International Standard has been published in accordance with the ISO/IEC Directives. IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Associati

23、on (IEEE-SA) Standards Board. The IEEE develops its standards through a consensus development process, approved by the American National Standards Institute, which brings together volunteers representing varied viewpoints and interests to achieve the final product. Volunteers are not necessarily mem

24、bers of the Institute and serve without compensation. While the IEEE administers the process and establishes rules to promote fairness in the consensus development process, the IEEE does not independently evaluate, test, or verify the accuracy of any of the information contained in its standards. Us

25、e of an IEC/IEEE Dual Logo International Standard is wholly voluntary. The IEC and IEEE disclaim liability for any personal injury, property or other damage, of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, us

26、e of, or reliance upon this, or any other IEC or IEEE Standard document. The IEC and IEEE do not warrant or represent the accuracy or content of the material contained herein, and expressly disclaim any express or implied warranty, including any implied warranty of merchantability or fitness for a s

27、pecific purpose, or that the use of the material contained herein is free from patent infringement. IEC/IEEE Dual Logo International Standards documents are supplied “AS IS”. The existence of an IEC/IEEE Dual Logo International Standard does not imply that there are no other ways to produce, test, m

28、easure, purchase, market, or provide other goods and services related to the scope of the IEC/IEEE Dual Logo International Standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and

29、comments received from users of the standard. Every IEEE Standard is subjected to review at least every five years for revision or reaffirmation. When a document is more than five years old and has not been reaffirmed, it is reasonable to conclude that its contents, although still of some value, do

30、not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE Standard. In publishing and making this document available, the IEC and IEEE are not suggesting or rendering professional or other services for, or on behalf of, a

31、ny person or entity. Neither the IEC nor IEEE is undertaking to perform any duty owed by any other person or entity to another. Any person utilizing this, and any other IEC/IEEE Dual Logo International Standards or IEEE Standards document, should rely upon the advice of a competent professional in d

32、etermining the exercise of reasonable care in any given circumstances. Interpretations Occasionally questions may arise regarding the meaning of portions of standards as they relate to specific applications. When the need for interpretations is brought to the attention of IEEE, the Institute will in

33、itiate action to prepare appropriate responses. Since IEEE Standards represent a consensus of concerned interests, it is important to ensure that any interpretation has also received the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coord

34、inating Committees are not able to provide an instant response to interpretation requests except in those cases where the matter has previously received formal consideration. Comments for revision of IEC/IEEE Dual Logo International Standards are welcome from any interested party, regardless of memb

35、ership affiliation with the IEC or IEEE. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Comments on standards and requests for interpretations should be addressed to: Secretary, IEEE-SA Standards Board, 445 Hoes

36、 Lane, P.O. Box 1331, Piscataway, NJ 08855-1331, USA and/or General Secretary, IEC, 3, rue de Varemb, PO Box 131, 1211 Geneva 20, Switzerland. Authorization to photocopy portions of any individual standard for internal or personal use is granted by the Institute of Electrical and Electronics Enginee

37、rs, Inc., provided that the appropriate fee is paid to Copyright Clearance Center. To arrange for payment of licensing fee, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual stan

38、dard for educational classroom use can also be obtained through the Copyright Clearance Center. NOTE Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken with resp

39、ect to the existence or validity of any patent rights in connection therewith. The IEEE shall not be responsible for identifying patents for which a license may be required by an IEEE standard or for conducting inquiries into the legal validity or scope of those patents that are brought to its attention. IEC 60488-1:2004(E) IEEE 488.1-2003(E) 6 Published by IEC under licence from IEEE. 2003 IEEE. All rights reserved.