IEC 60512-22-1-2010 Connectors for electronic equipment - Tests and measurements - Part 22-1 Capacitance tests - Test 22a Capacitance《电子设备连接器.试验和测量.第22-1部分 电容试验.22a试验 电容》.pdf

1、 IEC 60512-22-1Edition 1.0 2010-06INTERNATIONAL STANDARD NORME INTERNATIONALEConnectors for electronic equipment Tests and measurements Part 22-1: Capacitance tests Test 22a: Capacitance Connecteurs pour quipements lectroniques Essais et mesures Partie 22-1: Essais de capacit Essai 22a: Capacit IEC6

2、0512-22-1:2010 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2010 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, witho

3、ut permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Commi

4、ttee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la

5、CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Of

6、fice 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. Ab

7、out IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables yo

8、u to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all ne

9、w publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known

10、as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax:

11、 +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu tec

12、hnique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des

13、recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la CEI. Just Published dtai

14、lle deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions en anglais et en franais, ainsi que les

15、 termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ

16、du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 60512-22-1Edition 1.0 2010-06INTERNATIONAL STANDARD NORME INTERNATIONALEConnectors for electronic equipment Tests and measurements Part 22-1: Capacitance tests Test 22a: Capacitance Connecteurs pou

17、r quipements lectroniques Essais et mesures Partie 22-1: Essais de capacit Essai 22a: Capacit INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE EICS 31.220.01 PRICE CODECODE PRIXISBN 978-2-88910-958-6 Registered trademark of the International Electrotechnical Commi

18、ssion Marque dpose de la Commission Electrotechnique Internationale 2 60512-22-1 IEC:2010 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ CONNECTORS FOR ELECTRONIC EQUIPMENT TESTS AND MEASUREMENTS Part 22-1: Capacitance tests Test 22a: Capacitance FOREWORD 1) The International Electrotechnical Commissio

19、n (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in ad

20、dition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee inter

21、ested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance wi

22、th conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested

23、IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible fo

24、r the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between

25、 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of confo

26、rmity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and membe

27、rs of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or

28、 any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication ma

29、y be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60512-22-1 has been prepared by subcommittee 48B: Connectors, of IEC technical committee 48: Electromechanical components and mechanical structures for elect

30、ronic equipment. This standard cancels and replaces Test 22a of IEC 60512-9, issued in 1992. The structure of IEC 60512 series is explained in IEC 60512-1-100. The text of this standard is based on the following documents: FDIS Report on voting 48B/2158/FDIS 48B/2192/RVD Full information on the voti

31、ng for the approval of this standard can be found in the report on voting indicated in the above table. 60512-22-1 IEC:2010 3 This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of the IEC 60512 series, under the general title Connectors for elect

32、ronic equipment Tests and measurements, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this

33、 date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 4 60512-22-1 IEC:2010 CONNECTORS FOR ELECTRONIC EQUIPMENT TESTS AND MEASUREMENTS Part 22-1: Capacitance tests Test 22a: Capacitance 1 Scope and object This part of IEC 60512, when required by the detail

34、 specification, is used for testing connectors within the scope of technical committee 48. It may also be used for similar devices when specified in a detail specification. The object of this standard is to detail a standard test method to determine the capacitance between conductive elements of con

35、nectors. 2 Preparation of the specimen The specimen shall be prepared and mounted according to the detail specification. 3 Test method Any one of the following contact combinations may be measured: a) between one contact and the following parts, all connected to earth at a common point: all other co

36、ntacts, all metal parts, the mounting plate; b) between any two adjacent contacts, the following parts all being connected to earth at a common point: all other contacts, all metal parts, the mounting plate; c) any other measuring point or operating condition as specified by the detail specification

37、. The capacitance shall be measured at a frequency as specified by the detail specification, using a suitable test set, for example a capacitance bridge which will ensure an accuracy of 5 %. The preferred measuring frequencies are: 1 kHz 200 Hz, 1 MHz 200 kHz. 4 Requirements The values of capacitanc

38、e shall not exceed the values specified by the detail specification. 60512-22-1 IEC:2010 5 5 Details to be specified When this test is required by the detail specification, the following details shall be specified: a) preparation of the specimen; b) mounting of the specimen; c) contact combinations

39、to be measured; d) value of the measuring frequency; e) the maximum permitted value(s) of the capacitance(s); f) any deviation from the standard test method. _ 6 60512-22-1 CEI:2010 COMMISSION ELECTROTECHNIQUE INTERNATIONALE _ CONNECTEURS POUR EQUIPEMENTS ELECTRONIQUES ESSAIS ET MESURES Partie 22-1:

40、 Essais de capacit Essai 22a: Capacit AVANT-PROPOS 1) La Commission Electrotechnique Internationale (CEI) est une organisation mondiale de normalisation compose de lensemble des comits lectrotechniques nationaux (Comits nationaux de la CEI). La CEI a pour objet de favoriser la coopration internation

41、ale pour toutes les questions de normalisation dans les domaines de llectricit et de llectronique. A cet effet, la CEI entre autres activits publie des Normes internationales, des Spcifications techniques, des Rapports techniques, des Spcifications accessibles au public (PAS) et des Guides (ci-aprs

42、dnomms “Publication(s) de la CEI“). Leur laboration est confie des comits dtudes, aux travaux desquels tout Comit national intress par le sujet trait peut participer. Les organisations internationales, gouvernementales et non gouvernementales, en liaison avec la CEI, participent galement aux travaux

43、. La CEI collabore troitement avec lOrganisation Internationale de Normalisation (ISO), selon des conditions fixes par accord entre les deux organisations. 2) Les dcisions ou accords officiels de la CEI concernant les questions techniques reprsentent, dans la mesure du possible, un accord internatio

44、nal sur les sujets tudis, tant donn que les Comits nationaux intresss sont reprsents dans chaque comit dtudes. 3) Les publications CEI se prsentent sous la forme de recommandations internationales et elles sont agres comme telles par les Comits nationaux de Tous les efforts raisonnables sont entrepr

45、is afin que la CEI sassure de lexactitude du contenu technique de ses publications; la CEI ne peut pas tre tenue responsable de lventuelle mauvaise utilisation ou interprtation qui en est faite par un quelconque utilisateur final. 4) Dans le but dencourager luniformit internationale, les Comits nati

46、onaux de la CEI sengagent, dans toute la mesure possible, appliquer de faon transparente les Publications de la CEI dans leurs publications nationales et rgionales. Toute divergence entre toute Publication de la CEI et toute publication nationale ou rgionale correspondante doit tre indique en termes

47、 clairs dans cette dernire. 5) La CEI elle-mme ne fournit aucune attestation de conformit. Des organismes de certification indpendants fournissent des services dvaluation de conformit et, dans certains secteurs, accdent aux marques de conformit de la CEI. La CEI nest responsable daucun des services

48、effectus par les organismes de certification indpendants. 6) Tous les utilisateurs doivent sassurer quils sont en possession de la dernire dition de cette publication. 7) Aucune responsabilit ne doit tre impute la CEI, ses administrateurs, employs, auxiliaires ou mandataires, y compris ses experts particuliers et les membres de ses comits dtudes et des Comits nationaux de la CEI, pour tout prjudice caus en cas de dommages corporels et matriels, ou de tout autre dommage de quelque nature que ce soit, directe ou indirecte, ou pour supporter les cots (