1、 IEC 60519-6 Edition 3.0 2011-01 INTERNATIONAL STANDARD NORME INTERNATIONALE Safety in electroheat installations Part 6: Specifications for safety in industrial microwave heating equipment Scurit dans les installations lectrothermiques Partie 6: Spcifications pour les installations de chauffage indu
2、striel hyperfrquences IEC60519-6:2011 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2011 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopyi
3、ng and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IE
4、C member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, s
5、ans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de r
6、sidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and r
7、elated technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-li
8、ne Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published detai
9、ls twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additional
10、 languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.
11、: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publicat
12、ions CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous
13、 permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la C
14、EI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions en anglais et en
15、 franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des que
16、stions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 60519-6 Edition 3.0 2011-01 INTERNATIONAL STANDARD NORME INTERNATIONALE Safety in electroheat installations Part 6: Specifications for safety in industrial microwave heating
17、equipment Scurit dans les installations lectrothermiques Partie 6: Spcifications pour les installations de chauffage industriel hyperfrquences INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE U ICS 25.180.10 PRICE CODE CODE PRIX ISBN 978-2-88912-322-3 Registered t
18、rademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale 2 60519-6 IEC:2011 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope . 6 2 Normative references . 6 3 Terms and definitions . 7 4 Classification of electroheat equipment according to
19、voltage bands 9 5 Classification of electroheat equipment according to frequency bands 9 6 General requirements . 9 7 Isolation and switching . 12 8 Connection to the supply network and internal connections 12 9 Protection against electric shock 12 10 Protection against overcurrent 12 11 Equipotenti
20、al bonding . 12 12 Control circuits and control functions 12 13 Protection against thermal influences . 13 14 Risk of fire and danger of explosion 13 15 Marking, labelling and technical documentation 14 16 Information on inspection and commissioning, and instructions for utilization and maintenance
21、of electroheat installations . 16 Annex AA (normative) Measurement of microwave leakage 18 Annex BB (informative) Rationales for the microwave access barrier and associated leakage tests 22 Bibliography 28 Figure 1 Examples of warning labels 15 Figure A.1 Large microwave access barrier for conveyori
22、sed microwave heating equipment . 19 Figure A.2 Small microwave access barrier for conveyorised microwave heating equipment . 20 Figure A.3 Vertical-only microwave access barriers for conveyorised microwave heating equipment 21 Table 1 Dimensional requirements on microwave access barriers 11 60519-6
23、 IEC:2011 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ SAFETY IN ELECTROHEAT INSTALLATIONS Part 6: Specifications for safety in industrial microwave heating equipment FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all natio
24、nal electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical
25、 Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. In
26、ternational, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The
27、formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendation
28、s for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end use
29、r. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication
30、shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent ce
31、rtification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal
32、injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative referenc
33、es cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for ide
34、ntifying any or all such patent rights. International Standard IEC 60519-6 has been prepared by IEC technical committee 27: Industrial electroheating. This third edition cancels and replaces the second edition published in 2002 and constitutes a technical revision. The significant changes with respe
35、ct to the previous edition are as follows: the third edition of IEC 60519-1:2003 has been taken into account (the structure of clauses was adapted to it as far as practicable); some definitions are modified or brought into line with IEC 60050-841:2004; clauses on abnormal operation, access openings,
36、 microwave enclosure and barriers are added; the microwave leakage measurements are in a normative Annex A; an informative Annex B on the rationales for microwave exposure and leakage limits is added; Bibliography is added. 4 60519-6 IEC:2011 This part of IEC 60519 is to be used in conjunction with
37、IEC 60519-1:2003. It is intended to specify particular requirements for industrial microwave heating equipment. This Part 6 supplements or modifies the corresponding clauses of IEC 60519-1, so as to convert it into an IEC standard. Where a particular subclause of Part 1 is not mentioned in this Part
38、 6, that subclause applies as far as is reasonable. Where this standard states “addition“, modification“ or “replacement“, the relevant text of Part 1 is to be adapted accordingly. NOTE Subclauses and notes which are additional to those in Part 2 are numbered starting from 101, additional items and
39、annexes are lettered aa, bb or AA, BB, etc. The text of this standard is based on the following documents: CDV Report on voting 27/704/CDV 27/752/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication h
40、as been drafted in accordance with the ISO/IEC Directives, Part 2. The list of all parts of the IEC 60519 series, under the general title Safety in electroheat installations, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until
41、the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 60519-6 IEC:2011 5 INTRODUCTION This edition of IEC 60519-6 contain
42、s updates and revisions of IEC 60519-6:2002, which was used over several years. It specifies safety requirements for industrial microwave heating equipment and installations specially designed for specific applications, unlike household, commercial and laboratory microwave appliances. Criteria for d
43、iscrimination between these categories are dealt with in the scope. 6 60519-6 IEC:2011 SAFETY IN ELECTROHEAT INSTALLATIONS Part 6: Specifications for safety in industrial microwave heating equipment 1 Scope This part of IEC 60519 is applicable to equipment using microwave energy alone or in combinat
44、ion with other kinds of energy for industrial heating of materials. This part is applicable to industrial microwave heating equipment operating in the frequency range 300 MHz to 300 GHz. NOTE 1 Since the wavelength of the high end of the microwave band at 300 GHz is very short and particular leakage
45、 measurement instrumentation is needed in the low end of the band, the microwave leakage specification in Annex A applies only for the ISM frequencies between 800 MHz and 6 GHz. The centre frequencies of these are 2,45 GHz and 5,8 GHz universally, and between 896 MHz and 918 MHz in some regions. For
46、 such microwave equipment IEC 62311 applies. For other microwave frequencies, the basic restriction as addressed in informative Annex B or the ICNIRP Guidelines (see Bibliography) may be used. This part does not apply to appliances for household and similar use (covered by IEC 60335-2-25), commercia
47、l use (covered by IEC 60335-2-90) or laboratory use (covered by IEC 61010-2-010). NOTE 2 Since microwave tunnel ovens and also some other types of microwave equipment may be either for commercial, laboratory or industrial use, the following criteria are suitable for determination of the classificati
48、on as industrial equipment: commercial equipment is typically designed and planned for series production of many identical units, whereas industrial equipment is typically produced in small series or even as single units. The processed goods are consumed or ready for final use at the end of the heat
49、ing process. laboratory heating equipment is for preparing material in a laboratory environment, and the processed material is immediately available for investigations or further processing. Regular production of large quantities of material is not foreseen. with industrial equipment, the processed goods are not immediately accessible to the end user, and the goods may additionally not be in a final sta
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1