1、 INTERNATIONAL STANDARD IECCEINORME INTERNATIONALE60671Second editionDeuxime dition2007-05Nuclear power plants Instrumentation and control systems important to safety Surveillance testing Centrales nuclaires de puissance Systmes dinstrumentation et de contrle-commande importants pour la sret Essais
2、de surveillance Reference number Numro de rfrence IEC/CEI 60671:2007 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2007 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or m
3、echanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the
4、 address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la
5、photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit nation
6、al de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for a
7、ll electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www
8、.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC pub
9、lications. Just Published details twice a month all new publications released. Available on-line and also by email. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ
10、or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologi
11、es apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
12、Le Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform su
13、r les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous
14、 avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 INTERNATIONAL STANDARD IECCEINORME INTERNATIONALE60671Second editionDeuxime dition2007-05Nuclear power plants Instrumentation and control systems important to safety
15、 Surveillance testing Centrales nuclaires de puissance Systmes dinstrumentation et de contrle-commande importants pour la sret Essais de surveillance For price, see current cataloguePour prix, voir catalogue en vigueur PRICE CODE CODE PRIX T Commission Electrotechnique InternationaleInternational El
16、ectrotechnical Commission 2 60671 IEC:2007 CONTENTS FOREWORD.4 INTRODUCTION.6 1 Scope.8 2 Normative References 9 3 Terms and definitions .9 4 Basic Principles for Surveillance Testing 11 4.1 General .11 4.2 Gradation of Requirements Based on Category .12 4.3 Extent of Surveillance Testing .12 4.4 Se
17、lf-supervision in Lieu of Periodic Testing .12 4.5 Continuous Operation in Lieu of Periodic Testing 13 5 General Requirements for Surveillance Testing 13 5.1 Design Requirements 13 5.2 Procedures14 5.3 Data to be recorded upon detection of a fault 14 5.4 Other data to be recorded .14 5.5 Test interv
18、als 15 5.6 Verification of actuation set-points.15 5.7 Bypass 15 5.8 Response time 15 5.9 Restoration16 6 Requirements for Testing of Sensors and Signal Processing Devices.16 6.1 General .16 6.2 Non-tested parts16 6.3 Testing devices .16 6.4 Signals16 6.5 Variation of signals17 6.5.1 General .17 6.5
19、.2 Slowly changing signal 17 6.5.3 Rapidly changing signal.17 6.5.4 Large change in signal 17 6.6 Operability.17 6.7 Sensor response time18 6.8 Testing equipment.18 6.9 Calibration and transfer function18 6.10 Surveillance 18 7 Requirements for Testing of Electromechanical Equipment.18 7.1 General .
20、18 7.2 Interface18 7.3 Typical functional tests19 7.4 Continuous monitoring.19 7.5 Relays and valves .19 8 Requirements for Testing of Logic Assemblies .20 8.1 Scope20 8.2 General .20 60671 IEC:2007 3 8.3 Switching of signals.20 8.4 Testing signals 20 8.5 Interface21 8.6 Data to be displayed21 8.7 D
21、ata to be recorded.21 8.8 Detailed display.21 8.9 Testing equipment.21 8.10 Testing equipment using pulses 22 9 Self-supervision in computer-based I any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmen
22、tal organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on te
23、chnical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by
24、 IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uni
25、formity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5
26、) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directo
27、rs, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising o
28、ut of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn
29、 to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60671 has been prepared by subcommittee 45A: Instrumentation and control of nuclear f
30、acilities, of IEC technical committee 45: Nuclear instrumentation. This second edition cancels and replaces the first edition published in 1980 and constitutes a technical revision. The main technical changes with respect to the previous edition are as follows: Expand scope to cover all systems impo
31、rtant to safety, and clarify requirement gradation for systems and equipment performing category A, B and C functions. Align with the new revisions of IAEA documents NS-R-1 and NS-G-1.3 (replacing D3 and D8). 60671 IEC:2007 5 Provide references to relevant normative standards. Harmonize terminology
32、with the existing standard hierarchy. Strengthen the role of computer self-supervision as an alternative to periodic surveillance testing. Introduce features of digital I test of a group of equipment or components to confirm properties that support the safety function (continuity, power availability
33、, etc.); test based on information redundancy or comparison of control signatures (consistency checking for redundant sensors, CRC-checking, Checksum, etc.); periodic testing which is related to the correctness of functional behaviour of an I however, they may be combined with the surveillance testi
34、ng discussed herein. For any on-line tests the potential interaction and fault dependencies between the part of the system under test and the testing part, have to be carefully studied and their influences have to be fully integrated into the reliability assessment of the functions important to safe
35、ty (in accordance with IEC 61513). 60671 IEC:2007 9 This standard applies to the I this subset is to be identified at the beginning of any project. Signal processingLogic assembly Actuatingdevice MSensor Extent of I operational bypass: a bypass of certain protective actions when they are not necessa
36、ry in a particular mode of plant operation IAEA Safety Glossary, Ed. 2.0 2006 NOTE 1 A maintenance bypass that is applied to a channel may still leave the safety function operable through redundancy and majority voting (e.g. two out of four coincidence logic becomes two out of three). NOTE 2 A maint
37、enance bypass is not the same as an operational bypass. A maintenance bypass may reduce the degree of redundancy of equipment, but it does not result in the loss of a safety function. 3.4 full functional test test that includes perturbation of the process variable, detection by the sensor, processin
38、g of the signal(s), actuation of the appropriate sub-assemblies, logic assemblies and actuation devices 3.5 functional reliability ability to comply with requirements on complete and correct functionality and performance in: a) all defined plant operational modes and conditions, b) in all defined pl
39、ant I the state after switching is stable and correct; the time delay or the time constant has the correct value. 5.2 Procedures Periodic tests shall be made on the basis of carefully prepared test programmes in which identification of the tested parts, test conditions including initial plant state,
40、 test procedures and test periods are stated. 5.3 Data to be recorded upon detection of a fault Upon detection of a fault at least the following data shall be recorded: identification of the tested part; test device description; detectable fault combinations; date and time of the test during which f
41、aults have been detected; period between this test and the previous test that would have permitted the detection of the faults; type of failure which could be caused by the fault in case of demand; operating mode of I authorization signature(s); title of test programme; action taken when fault is de
42、tected. 5.4 Other data to be recorded 5.4.1 After each test where no fault was detected at least the following data shall be recorded: test frequency (for automatic tests only); test schedule used; date, time and duration of the test (for manually initiated tests); identification of tested equipment
43、. NOTE It is recommended that statistical data related to the test results be carefully recorded and analyzed to give realistic “failure rate” data. When such data become available with a reasonable confidence level, they should be compared with the frequency of testing to determine whether modifica
44、tion of the frequency in either direction is appropriate. 60671 IEC:2007 15 5.4.2 Any non-safety relevant values that can be measured during the surveillance tests should be analysed from the maintenance point of view and recorded. The only limitation of these measurements is that they shall not jeo
45、pardise the safety surveillance testing. 5.5 Test intervals The test interval is the relevant design parameter for the demonstration that reliability and availability goals are met for the system under consideration. The test intervals shall be based on mathematical relations involving the reliabili
46、ty and availability goals, the type of system architecture, the expected fault-rate or experienced fault-rate, test duration and permissible system unavailability. 5.6 Verification of actuation set-points 5.6.1 Testing to verify actuation set-points that are continuously calculated or likewise testi
47、ng to verify a calculated complex safety function with a fixed set-point level shall be performed by manipulating each variable that enters into the computation. While the signal for one or more variables is being varied to achieve actuation or change in computer output, the signals for the other va
48、riables should be adjusted to normal expected values for the actuation condition. 5.6.2 For computer-based I for example, testing the actuation device for a system pump separately from the actuation device for the system valves. 7.2.3 The operation of certain actuated equipment shall be prevented du
49、ring a test of the related actuation devices; for example, moving the circuit breaker for a pump to a test position that prevents power from being supplied to the pump during a test closure of its circuit breaker. Operation of the actuated equipment itself shall be tested when plant conditions permit in a way that overlaps this test. 7.2.4 Operation of the actu
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1