IEC 60691-2015 Thermal-links - Requirements and application guide《热熔断体.要求和应用导则》.pdf

1、 IEC 60691 Edition 4.0 2015-10 INTERNATIONAL STANDARD NORME INTERNATIONALE Thermal-links Requirements and application guide Protecteurs thermiques Exigences et guide dapplication IEC 60691:2015-10(en-fr) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2015 IEC, Geneva, Switzerland All rights reser

2、ved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If

3、you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette

4、publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si

5、vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch

6、About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant re

7、view by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specificat

8、ions, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on p

9、rojects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading

10、online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 60 00

11、0 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish

12、 to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui

13、a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.

14、ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searc

15、hpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur le

16、s nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions

17、 en anglais et en franais, ainsi que les termes quivalents dans 15 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary Plus de 60 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des ar

18、ticles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions c

19、ontactez-nous: csciec.ch. IEC 60691 Edition 4.0 2015-10 INTERNATIONAL STANDARD NORME INTERNATIONALE Thermal-links Requirements and application guide Protecteurs thermiques Exigences et guide dapplication INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 29.120.

20、50 ISBN 978-2-8322-2921-7 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu ce

21、tte publication via un distributeur agr. 2 IEC 60691:2015 IEC 2015 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references 7 3 Terms and definitions 8 4 General requirements 10 5 General notes on tests 11 6 Classification . 13 6.1 Electrical conditions 13 6.2 Thermal conditions 14 6.

22、3 Resistance to tracking . 14 7 Marking . 14 8 Documentation 15 9 Constructional requirements 15 9.1 General . 15 9.2 Lead secureness tests 16 9.2.1 General . 16 9.2.2 Tensile test 16 9.2.3 Thrust test . 17 9.2.4 Bending/twist test 17 9.3 Contacts used for the current path 18 9.4 Accessible mounting

23、 brackets or metal parts 18 9.5 Insulating materials . 18 9.6 Resistance to tracking . 18 9.7 Creepage distances and clearances 18 9.8 Temperature and humidity cycle conditioning 19 9.9 Terminals and terminations . 19 10 Electrical requirements 19 10.1 Dielectric strength . 19 10.2 Insulation resist

24、ance . 20 10.3 Interrupting current . 21 10.3.1 General . 21 10.3.2 Specific conditions . 21 10.4 Transient overload current 22 10.5 Limited short-circuit test 23 10.5.1 General . 23 10.5.2 Test method 23 10.5.3 Fuse size (rating) . 23 10.5.4 Compliance . 24 11 Temperature tests . 24 11.1 General .

25、24 11.2 Holding temperature, T h24 11.3 Rated functioning temperature, T f. 25 11.4 Maximum temperature limit, T m25 IEC 60691:2015 IEC 2015 3 11.5 Ageing 25 12 Resistance to rusting . 26 13 Manufacturers validation programme 26 Annex A (normative) Application guide. 28 Annex B (normative) Alternati

26、ve ageing test for thermal-links with T hgreater than 250 C for use in electric irons 29 Annex C (normative) Conductive heat ageing test 30 C.1 Conductive heat ageing test 30 C.2 Method . 30 C.3 Ageing 31 C.4 Results . 32 C.5 Dielectric strength test 32 C.6 Test oven 32 Annex D (informative) Extende

27、d holding temperature evaluation 34 D.1 Extended holding temperature conditioning test 34 D.2 Load current interrupt test . 34 Annex E (normative) Seal ageing test 36 Annex F (normative) Identification requirements 38 Annex G (normative) Indelibility of markings 39 Annex H (normative) Requirements f

28、or thermal-link packaged assemblies . 40 Bibliography 43 Figure 1 Bending/twist test . 17 Figure C.1 Typical test fixture assembly . 32 Figure C.2 Typical thermal-link test oven . 33 Figure D.1 Typical terminal block support test fixture . 35 Figure E.1 Conditioning time versus oven temperature for

29、proposed temperature index. 37 Figure G.1 Apparatus for testing durability of markings 39 Table 1 Test schedule 13 Table 2 Strength of leads and terminal parts Minimum required tensile and thrust test forces . 17 Table 3 Creepage distances and clearances (absolute minimum values) . 19 Table 4 Test v

30、oltages for dielectric strength . 20 Table 5 Test current for interrupting test 21 Table 6 Limited short-circuit test capacity 23 Table H.1 Push and pull force 41 Table H.2 Minimum nominal cross-sectional area of conductor 42 4 IEC 60691:2015 IEC 2015 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ THER

31、MAL-LINKS REQUIREMENTS AND APPLICATION GUIDE FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on al

32、l questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publi

33、cation(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. I

34、EC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of o

35、pinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made t

36、o ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparen

37、tly to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certif

38、ication bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shal

39、l attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including lega

40、l fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publ

41、ication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60691 has been prepared by subcommittee 32C: Miniature

42、fuses, of IEC technical committee 32: Fuses. This fourth edition cancels and replaces the third edition published in 2002, Amendment 1: 2006 and Amendment 2: 2010. This fourth edition constitutes a technical revision. This fourth edition includes the following significant technical changes with resp

43、ect to the previous edition: a) requirements for thermal-link packaged assemblies; b) renew the requirements and definitions for T h -test; c) change starting temperature for interrupt current test; d) clarify requirements for marking (packing label); e) minimum Proof Tracking Index 175 instead 120.

44、 IEC 60691:2015 IEC 2015 5 The text of this standard is based on the following documents: FDIS Report on voting 32C/512/FDIS 32C/515/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been draft

45、ed in accordance with the ISO/IEC Directives, Part 2. The basis for this standard is the harmonization of the USA national standard, UL 1020, fifth edition (withdrawn 2003), and IEC 60691:1993, together with its Amendment 1:1995 and Amendment 2:2000. The following differing practices of a less perma

46、nent nature exist in the country indicated below: Annex C is required to be declared in the USA; Annex E is required in the USA, if applicable; Annex F is required to be declared in the USA. In this standard, the following type is used: compliance statements: in italic type. The committee has decide

47、d that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended.

48、6 IEC 60691:2015 IEC 2015 INTRODUCTION Thermal-links, defined as non-resettable devices functioning once only without refunctioning, are widely applied for the thermal protection of equipment in which, under fault (abnormal) conditions, one or more parts may reach hazardous temperatures. As these de

49、vices have several aspects in common with miniature fuse-links and are used for obtaining a comparable degree of protection, this standard has endeavoured to lay down a number of basic requirements for such devices. IEC 60691:2015 IEC 2015 7 THERMAL-LINKS REQUIREMENTS AND APPLICATION GUIDE 1 Scope This International Standard is applicable to thermal-links intended for incorporation in electrical a