1、 IEC 60695-1-10 Edition 2.0 2016-11 REDLINE VERSION Fire hazard testing Part 1-10: Guidance for assessing the fire hazard of electrotechnical products General guidelines IEC 60695-1-10:2016-11 RLV(en) BASIC SAFETY PUBLICATION colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2016 IEC,
2、Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee
3、in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3,
4、rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. Ab
5、out IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the
6、 entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of
7、 criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online
8、 and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnic
9、al Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary 65 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and
10、CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC 60695-1-10 Edition 2.0 2016-11 REDLINE VERSION Fire hazard testing Part 1-10: Guidance for assessin
11、g the fire hazard of electrotechnical products General guidelines INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 13.220.40; 29.020 ISBN 978-2-8322-3796-0 BASIC SAFETY PUBLICATION Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained this publicatio
12、n from an authorized distributor. colour inside 2 IEC 60695-1-10:2016 RLV IEC 2016 CONTENTS FOREWORD . 3 INTRODUCTION . 6 1 Scope 7 2 Normative references 7 3 Terms and definitions 8 4 Fire hazards associated with electrotechnical products 10 5 Fundamentals of fire hazard testing . 11 5.1 Objectives
13、 . 11 5.2 Fire hazard and fire risk 12 5.2.1 Fire hazard 12 5.2.2 Fire risk . 14 5.3 Fire scenarios . 15 5.4 Fire-safety engineering . 17 5.5 Fire hazard assessment 17 6 Types of fire test 17 6.1 General . 17 6.2 Quantitative and qualitative groups of fire tests . 17 6.2.1 Quantitative fire tests .
14、17 6.2.2 Qualitative fire tests . 18 6.3 Types of fire tests . 18 6.3.1 Fire simulation test 18 6.3.2 Fire resistance tests 18 6.3.3 Tests with regard to reaction to fire 18 6.3.4 Preselection fire tests 18 6.3.5 Basic property tests . 19 7 Appropriate use of qualitative fire tests 19 8 Preparation
15、of requirements and test specifications . 19 9 Common ignition sources 20 10 Reference documents of TC 89 . 20 Annex A (informative) The power output of ignition sources . 21 A.1 General . 21 A.2 Some common electrical and non-electrical ignition sources . 21 A.3 Power source classification in IEC 6
16、2368-1 9 22 Annex B (informative) Guidance publications and test methods . 23 Bibliography 25 Table 1 Common causes of ignition phenomena encountered in electrotechnical products 13 Table 2 Characteristics of fire stages (from Table 1 in ISO 19706:2011 22) . 16 Table A.1 Examples of ignition sources
17、 22 Table B.1 TC 89 guidance publications and test methods 23 IEC 60695-1-10:2016 RLV IEC 2016 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIRE HAZARD TESTING Part 1-10: Guidance for assessing the fire hazard of electrotechnical products General guidelines FOREWORD 1) The International Electrotech
18、nical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To thi
19、s end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National
20、Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO)
21、in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from
22、 all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be hel
23、d responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any di
24、vergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IE
25、C marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual e
26、xperts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IE
27、C Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IE
28、C Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. DISCLAIMER This Redline version is not an official IEC Standard and is intended only to provide the user with an indication of what changes have been made to the previo
29、us version. Only the current version of the standard is to be considered the official document. This Redline version provides you with a quick and easy way to compare all the changes between this standard and its previous edition. A vertical bar appears in the margin wherever a change has been made.
30、 Additions are in green text, deletions are in strikethrough red text. 4 IEC 60695-1-10:2016 RLV IEC 2016 International Standard IEC 60695-1-10 has been prepared by IEC technical committee 89: Fire hazard testing. This second edition cancels and replaces the first edition published in 2009. This edi
31、tion constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) reference to IEC 60695-1-12; b) modified Introduction and Scope; c) updated normative references; d) updated terms and definitions; e) modified Table 1; f
32、) addition of Table 2; g) new text in Subclauses 5.2, 5.3 and 5.4; h) mandatory text in Clause 8; i) Annex B changed to Annex A, and modified; j) new Annex B concerning common ignition sources. The text of this standard is based on the following documents: FDIS Report on voting 89/1341/FDIS 89/1347/
33、RVD Full information on the voting for the approval of this International Standard can be found in the report on voting indicated in the above table. This document has been drafted in accordance with the ISO/IEC Directives, Part 2. It has the status of a basic safety publication in accordance with I
34、EC Guide 104 and ISO/IEC Guide 51. This standard is to be used in conjunction with IEC 60695-1-11 and IEC 60695-1-12. A list of all the parts in the IEC 60695 series, under the general title Fire hazard testing, can be found on the IEC website. IEC 60695-1 consists of the following parts: Part 1-10:
35、 Guidance for assessing the fire hazard of electrotechnical products General guidelines Part 1-11: Guidance for assessing the fire hazard of electrotechnical products Fire hazard assessment Part 1-12: Guidance for assessing the fire hazard of electrotechnical products Fire-safety engineering Part 1-
36、20: Guidance for assessing the fire hazard of electrotechnical products Ignitability General guidance Part 1-21: Guidance for assessing the fire hazard of electrotechnical products Ignitability Summary and relevance of test methods IEC 60695-1-10:2016 RLV IEC 2016 5 Part 1-30: Guidance for assessing
37、 the fire hazard of electrotechnical products Preselection testing process General guidelines Part 1-40: Guidance for assessing the fire hazard of electrotechnical products Insulating liquids The committee has decided that the contents of this document will remain unchanged until the stability date
38、indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific document. At this date, the document will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT The “colour inside” logo on the cover page of this publication indicates that it co
39、ntains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this publication using a colour printer. 6 IEC 60695-1-10:2016 RLV IEC 2016 INTRODUCTION In the design of any electrotechnical product, the risk of fire and the potential haza
40、rds associated with fire need to be considered. In this respect the objective of component, circuit and product equipment design, as well as the choice of materials, is to reduce to acceptable levels the potential risks of fire to a tolerable level even in the event of reasonably foreseeable abnorma
41、l (mis)use, malfunction or failure. This standard, together with its companions, IEC 60695-1-11 and IEC 60695-1-12, provides guidance on how this is to be accomplished. The use of compartments with fire-resistant boundaries, and the use of detection and suppression systems are important methods for
42、the mitigation of fire risk, but are not dealt with in this standard. Fires involving electrotechnical products can be initiated from external non-electrical sources. Considerations of this nature are dealt with in an overall fire hazard assessment. The aim of the IEC 60695 series of standards is to
43、 save lives and property by reducing the number of fires or reducing the consequences of the fire. This can be accomplished by: the primary aims are trying to prevent ignition caused by an electrically energised component part and, in the event of ignition, to confine any resulting fire within the b
44、ounds of the enclosure of the electrotechnical product; secondary aims include trying to minimise any flame spread beyond the products enclosure and to minimise the harmful effects of fire effluents including heat, smoke, and toxic or corrosive combustion products. Fires involving electrotechnical p
45、roducts can also be initiated from external non-electrical sources. Considerations of this nature are dealt with in the overall risk assessment. Assessing the fire hazard of electrotechnical products is accomplished by performing fire hazard tests. These tests are divided into two fundamental groups
46、: qualitative fire tests and quantitative fire tests. Fire testing of electrotechnical products should, whenever possible, be carried out using quantitative fire tests having the following characteristics. a) The test should take into account the circumstances of product use, i.e. contemplated end-u
47、se conditions as well as foreseeable abnormal use. This is because fire conditions that may be hazardous under one set of circumstances will not necessarily pose the same threat under a different set. b) It should be possible to correlate the test results with the harmful effects of fire effluents r
48、eferred to above, i.e. the thermal and airborne threats to people and/or property in the relevant end-use situation. This avoids the creation of artificial, and sometimes distorted, performance scales with no clear relationship to fire safety. c) Recognizing that there are usually multiple contribut
49、ions to the effects of real fires, the test results should be expressed in well-defined terms and using rational scientific units, so that the products contribution to the overall fire effects can be quantitatively assessed and compared with that of other products contributions. Although quantitative tests are preferred, the characteristics of qualitative fire tests are that they provide pass/fail and classification results. Under certain circumstances it will be appropriate to
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1