IEC 60728-3-1-2012 Cable networks for television signals sound signals and interactive services - Part 3-1 Active wideband equipment for cable networks - Methods of measurement of .pdf

1、 IEC 60728-3-1 Edition 1.0 2012-07 INTERNATIONAL STANDARD NORME INTERNATIONALE Cable networks for television signals, sound signals and interactive services Part 3-1: Active wideband equipment for cable networks Methods of measurement of non-linearity for full digital channel load with DVB-C signals

2、 Rseaux de distribution par cbles pour signaux de tlvision, signaux de radiodiffusion sonore et services interactifs Partie 3-1: Matriel actif large bande pour rseaux de distribution par cbles Mthodes de mesure de la non-linarit pour une charge tout numrique de signaux DVB-C IEC 60728-3-1:2012 THIS

3、PUBLICATION IS COPYRIGHT PROTECTED Copyright 2012 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in wri

4、ting from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further inf

5、ormation. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit nati

6、onal de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 91

7、9 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related techn

8、ologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced sea

9、rch enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published

10、 details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in addi

11、tional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de la CEI La

12、 Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est c

13、onstamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La recherche avance vous permet de trouver des publications CEI en utilisant diffrents critres (numro de

14、 rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications de la CEI. Just Published dtaille les nouvelles publications parues. Disponible

15、 en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelle

16、s. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 60728-3-1 Edition 1.0 2012-07 INTERNATIONAL STANDARD NORM

17、E INTERNATIONALE Cable networks for television signals, sound signals and interactive services Part 3-1: Active wideband equipment for cable networks Methods of measurement of non-linearity for full digital channel load with DVB-C signals Rseaux de distribution par cbles pour signaux de tlvision, si

18、gnaux de radiodiffusion sonore et services interactifs Partie 3-1: Matriel actif large bande pour rseaux de distribution par cbles Mthodes de mesure de la non-linarit pour une charge tout numrique de signaux DVB-C INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE Q

19、 ICS 33.060; 33.170 PRICE CODE CODE PRIX ISBN 978-2-83220-211-1 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuille

20、z vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 60728-3-1 IEC:2012 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope . 6 2 Normative references . 6 3 Terms, definitions, symbols and abbreviations 6 Terms and definitions 6 3.1Symbols 7 3.2Abbreviations 7 3.3 4 Methods of

21、 measurement of non-linearity for full digital channel load . 8 Maximum operating output level using the measurement of bit error ratio 4.1 (BER) 8 General . 8 4.1.1Equipment required . 8 4.1.2Connection of equipment . 9 4.1.3Measurement procedure 9 4.1.4Presentation of the results . 10 4.1.5Measure

22、ment of the carrier-to-interference noise ratio CINR . 10 4.2General . 10 4.2.1Equipment required . 10 4.2.2Connection of the equipment . 11 4.2.3Measurement procedure 11 4.2.4Presentation of the results . 12 4.2.5 5 Equipment characteristics required to be published 12 Annex A (informative) Example

23、s of measurement channels . 13 Annex B (normative) Null packet and PRBS definitions 14 Bibliography 16 Figure 1 BER measurement test configuration . 9 Figure 2 CINR measurement test setup 11 Figure 3 Plot of CINR curve versus EUT channel output signal level in dB( V) . 12 Table B.1 Null transport st

24、ream packet definition . 15 60728-3-1 IEC:2012 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES Part 3-1: Active wideband equipment for cable networks Methods of measurement of non-linearity for full digital channel load with

25、 DVB-C signals FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standar

26、dization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation

27、 is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with t

28、he International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subject

29、s since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical co

30、ntent of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent poss

31、ible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conform

32、ity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directo

33、rs, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising o

34、ut of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn

35、 to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60728-3-1 has been prepared by technical area 5: Cable networks for television signal

36、s, sound signals and interactive services, of IEC technical committee 100: Audio, video and multimedia systems and equipment. The text of this standard is based on the following documents: FDIS Report on voting 100/1969/FDIS 100/2006/RVD Full information on the voting for the approval of this standa

37、rd can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. 4 60728-3-1 IEC:2012 The list of all parts of the IEC 60728 series, under the general title, Cable networks for television signals, sound signals

38、 and interactive services, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the pu

39、blication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 60728-3-1 IEC:2012 5 INTRODUCTION Standards of the IEC 60728 series deal with cable networks including equipment and associated methods of measurement for headend reception, processing and distribution of television

40、 signals, sound signals and their associated data signals and for processing, interfacing and transmitting all kinds of signals for interactive services using all applicable transmission media. This includes CATV 1 -networks, MATV-networks and SMATV-networks, individual receiving networks, and all k

41、inds of equipment, systems and installations installed in such networks. For active equipment with balanced RF signal ports this standard applies only to those ports which carry RF broadband signals for services as described in the scope of this standard. The extent of this standardization work is f

42、rom the antennas and/or special signal source inputs to the headend or other interface points to the network up to the terminal input. The standardization of any user terminals (i.e., tuners, receivers, decoders, multimedia terminals, etc.) as well as of any coaxial, balanced and optical cables and

43、accessories thereof is excluded. _ 1This word encompasses the HFC networks used nowadays to provide telecommunications services, voice, data, audio and video both broadcast and narrowcast. 6 60728-3-1 IEC:2012 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES Part 3-1: Ac

44、tive wideband equipment for cable networks Methods of measurement of non-linearity for full digital channel load with DVB-C signals 1 Scope This part of IEC 60728 is applicable to the methods of non-linearity measurement for cable networks which carry only digitally modulated television signals, sou

45、nd signals and signals for interactive services. These methods take into account the specific signal form and behaviour of digitally modulated signals which differ from the analogue broadcast signals represented mainly by the existence of discrete carrier signals. 2 Normative references The followin

46、g documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60728-3, Cable

47、networks for television signals, sound signals and interactive services Part 3: Active wideband equipment for cable networks ISO/IEC 13818-1:2007, Information technology Generic coding of moving pictures and associated audio information: Systems 3 Terms, definitions, symbols and abbreviations For th

48、e purposes of this document, the following terms, definitions, symbols and abbreviations apply. Terms and definitions 3.1 Subclause 3.1 of IEC 60728-3 is applicable except as follows. Addition: 3.1.25 maximum operating output level average channel power level of a digitally modulated signal in the 2

49、56 QAM format with a symbol rate of 6,9 MSymb/s with 15 % cosine roll-off, measured with full digital channel load Note 1 to entry: This maximum operating output level has no direct correlation to that derived from CTB/CSO measurements of analogue or mixed analogue-digital channel loads. 60728-3-1 IEC:2012 7 Symbols 3.2 The following graphical symbols are used in the figures of this sta