IEC 60730-2-12-2015 Automatic electrical controls - Part 2-12 Particular requirements for electrically operated door lock《电气自动控制器.第2-12部分 电动门锁的特殊要求》.pdf

1、 IEC 60730-2-12 Edition 3.0 2015-04 INTERNATIONAL STANDARD Automatic electrical controls Part 2-12: Particular requirements for electrically operated door locks IEC 60730-2-12:2015-04(en) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2015 IEC, Geneva, Switzerland All rights reserved. Unless othe

2、rwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any que

3、stions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 2

4、0 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC pu

5、blications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC Internati

6、onal Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committ

7、ee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.

8、electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary -

9、 std.iec.ch/glossary More than 60 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Cent

10、re - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC 60730-2-12 Edition 3.0 2015-04 INTERNATIONAL STANDARD Automatic electrical controls Part 2-12: Particular requirements for electric

11、ally operated door locks INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 97.120 ISBN 978-2-8322-2586-8 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained this publication from an authorized distributor. 2 IEC 60730-2-12:2015 IEC 2015 CONTENTS FOR

12、EWORD . 3 1 Scope and normative references 6 2 Terms and definitions. 7 3 General requirements 8 4 General notes on tests . 8 5 Rating 8 6 Classification . 8 7 Information 9 8 Protection against electric shock 9 9 Provision for protective earthing . 9 10 Terminals and terminations 10 11 Construction

13、al requirements 10 12 Moisture and dust resistance 10 13 Electric strength and insulation resistance 10 14 Heating 10 15 Manufacturing deviation and drift 10 16 Environmental stress . 10 17 Endurance . 10 18 Mechanical strength . 13 19 Threaded parts and connections 13 20 Creepage distances, clearan

14、ces and distances through solid insulation 13 21 Resistance to heat, fire and tracking 13 22 Resistance to corrosion 13 23 Electromagnetic compatibility (EMC) requirements Emission . 13 24 Components 14 25 Normal operation . 14 26 Electromagnetic compatibility (EMC) requirements Immunity . 14 27 Abn

15、ormal operation 14 28 Guidance on the use of electronic disconnection 16 Annexes 17 Annex H (normative) Requirements for electronic controls 17 Table 1 (7.2 of edition 3) Required information and methods of providing information . 9 IEC 60730-2-12:2015 IEC 2015 3 INTERNATIONAL ELECTROTECHNICAL COMMI

16、SSION _ AUTOMATIC ELECTRICAL CONTROLS Part 2-12: Particular requirements for electrically operated door locks FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees).

17、 The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Spe

18、cifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizati

19、ons liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matter

20、s express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

21、Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC N

22、ational Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself d

23、oes not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they

24、have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature wha

25、tsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publi

26、cations is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Sta

27、ndard IEC 60730-2-12 has been prepared by technical committee 72: Automatic electrical controls. This third edition cancels and replaces the second edition published in 2005. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect

28、 to the previous edition: a) aligns the text with IEC 60730-1, Edition 5; b) modifies requirements for Class B control function (H.27.1.2.2); c) modifies requirements for Class C control function (H.27.1.2.3); d) modifies requirements for faults during safety shut-down. 4 IEC 60730-2-12:2015 IEC 201

29、5 The text of this standard is based on the following documents: FDIS Report on voting 72/981/FDIS 72/993/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the I

30、SO/IEC Directives, Part 2. This part 2 is intended to be used in conjunction with IEC 60730-1. It was established on the basis of the fifth edition (2013) of that publication. Consideration may be given to future editions of, or amendments to, IEC 60730-1. This part 2 supplements or modifies the cor

31、responding clauses in IEC 60730-1 so as to convert that publication into the IEC standard: Particular requirements for electrically operated door locks. Where this part 2 states “addition“, “modification“, or “replacement“, the relevant requirement, test specification or explanatory matter in part 1

32、 should be adapted accordingly. Where no change is necessary, this part 2 indicates that the relevant clause or subclause applies. In the development of a fully international standard, it has been necessary to take into consideration the differing requirements resulting from practical experience in

33、various parts of the world and to recognize the variation in national electrical systems and wiring rules. The “in some countries” notes regarding differing national practices are contained in the following subclauses: 17.1.3.1 17.7.1 17.7.7 17.10.4 27.2.3.1 In this publication: 1) The following pri

34、nt types are used: Requirements proper: in roman type; Test specifications: in italic type; Notes; in small roman type; Words defined in Clause 2: bold. 2) Subclauses, notes, tables and figures which are additional to those in part 1 are numbered starting from 101; additional annexes are lettered AA

35、, BB, etc. A list of all parts of the IEC 60730 series, published under the title Automatic electrical controls can be found on the IEC website. IEC 60730-2-12:2015 IEC 2015 5 The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on

36、the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. 6 IEC 60730-2-12:2015 IEC 201

37、5 AUTOMATIC ELECTRICAL CONTROLS Part 2-12: Particular requirements for electrically operated door locks 1 Scope and normative references This clause of Part 1 is applicable except as follows: 1.1 Scope Replacement: This part of IEC 60730 applies to electrically operated door locks for use in, on or

38、in association with equipment, including equipment for heating, air-conditioning and similar applications. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof. NOTE 1 Throughout this standard, the word “equipment“ includes “appliance“ and “co

39、ntrol system“. This standard also applies to electrically operated door locks for equipment that may be used by the public, such as equipment intended to be used in shops, offices, hospitals, farms and commercial and industrial applications. This standard does not apply to electrically operated door

40、 locks intended exclusively for industrial process applications unless explicitly mentioned in the equipment standard. This standard does not apply to electrically operated door locks intended for security access applications. NOTE 2 Standards that cover these applications are under IEC Technical Co

41、mmittee 79. 1.1.1 Replacement: This standard applies to the inherent safety, to the operating values, operating sequences where such are associated with equipment protection, and to the testing of door locks used in, or in association with equipment. This standard is also applicable to door locks fo

42、r appliances within the scope of IEC 60335-1. NOTE Throughout this standard, the word “door” means “door, cover or lid”. The words “door lock” mean “electrically operated door lock”. This standard is also applicable to individual door locks utilized as part of a control system or door locks which ar

43、e mechanically integral with multi-functional controls having non-electrical outputs or employing motors. Door locks for equipment not intended for normal household use, but which nevertheless may be used by the public, such as equipment intended to be used by laymen in shops, in light industry and

44、on farms, are within the scope of this standard. This standard is also applicable to the functional safety of low complexity safety related systems and controls employing door locks as the actuating element. IEC 60730-2-12:2015 IEC 2015 7 1.1.2 Replacement: This standard applies to door locks with e

45、lectrical circuits and control circuits which are, for example, operated by bimetals, magnet coils, memory metals, pressure elements, temperature-sensitive expansion elements or electronic elements. 1.1.3 Not applicable. 1.1.4 Replacement: This standard applies to manual controls when such are elect

46、rically and/or mechanically integral with door locks. NOTE Requirements for manual switches not forming part of a door lock are contained in IEC 61058-1. 1.1.5 Replacement: This standard applies to a.c. or d.c. powered door locks with a rated voltage not exceeding 690 V a.c. or 600 V d.c. 1.1.6 Repl

47、acement: This standard does not take into account the response value of an automatic action of a door lock, if such a response value is dependent upon the method of mounting the control in the equipment. Where a response value is of significant purpose for the protection of the user, or surroundings

48、, the value defined in the appropriate equipment standard or as determined by the manufacturer shall apply. 1.1.7 Replacement: This standard applies also to door locks incorporating electronic devices, requirements for which are contained in Annex H and door locks using thermistors, requirements for

49、 which are contained in Annex J. 2 Terms and definitions This clause of Part 1 is applicable except as follows: 2.2 Definitions of types of control according to purpose Additional definition: 2.2.101 electrically operated door lock incorporated or integrated electrically operated mechanism intended to control the door locking in equipment by means of a mechanical output mechanism which physically secures a door, cover or lid 2.3 Definitions relating to the function of controls Additional definitions: 2.